6” Rough Country

[Jeff Hudak]

i have 6 inch rough country and 37s, im 86 inches, or 7 foot 2 to top of cab

 

[Jeff Hudak]

i have a 6 inch rough country lift and 37s, mine is 86 inches top of cab

 

[bft305]

My K20 has a 6” BDS all spring lift kit and with street tires (32”) it will just clear getting into my garage 7’ door. With my 37” swampers I would say about 7’1” - 7’2”.

 

[AMERICANBADASS]

Just a follow up, the top of cab ended up being 7’-2”. That’s 6” Rough Country, with 37’s. I was going to do an add a leaf, but chose to do front and rear springs.
Other than a few loose ends to finish, it’s turning out really nice! Thank you everyone for the input

You must be registered for see images attach

 

[Arkansas_V8]

Just a follow up, the top of cab ended up being 7’-2”. That’s 6” Rough Country, with 37’s. I was going to do an add a leaf, but chose to do front and rear springs.
Other than a few loose ends to finish, it’s turning out really nice! Thank you everyone for the input

You must be registered for see images attach

Looking great.

 

[hoagster]

Maybe ORD measures "differently" for Suburbans/Blazers. @colonel mustard has an awesome Blazer with a 6" ORD lift... his blazer:

You must be registered for see images attach

I believe he is on 35s here. Notice how the tires are almost completely out of the wheel well. If I remember right his is 5" taller than mine- so that would be 7'2" or so.

What wheel brand are those?

 

[colonel mustard]

Maybe ORD measures "differently" for Suburbans/Blazers. @colonel mustard has an awesome Blazer with a 6" ORD lift... his blazer:

You must be registered for see images attach

I believe he is on 35s here. Notice how the tires are almost completely out of the wheel well. If I remember right his is 5" taller than mine- so that would be 7'2" or so.

Thanks for the shout out and compliments !!!!

It is a 6” ORD lift on 35” tires. The rims were 15x12. I have since swapped the rims for steel 15x10. Much much better.

FYI.

ORD does not measure the lifts by top of can measurements. The measure from the bottom of the bump stop bracket (front) to the top of the axle tube.

Either way 6” custom ORD spring and 35” tires ..... you will still rub on full flex.

Cheers

You must be registered for see images attach

Sent from my iPhone using Tapatalk

 

[hoagster]

Thanks for the shout out and compliments !!!!

It is a 6” ORD lift on 35” tires. The rims were 15x12. I have since swapped the rims for steel 15x10. Much much better.

FYI.

ORD does not measure the lifts by top of can measurements. The measure from the bottom of the bump stop bracket (front) to the top of the axle tube.

Either way 6” custom ORD spring and 35” tires ..... you will still rub on full flex.

Cheers

You must be registered for see images attach

what brand are your wheels?




Sent from my iPhone using Tapatalk

 

[colonel mustard]

There was a quote but nothing written ?? Typo ??


Sent from my iPhone using Tapatalk

 

[hoagster]

There was a quote but nothing written ?? Typo ??


Sent from my iPhone using Tapatalk

what brand are your wheels?

 

[colonel mustard]

what brand are your wheels?

I don’t what brand of wheels those are. All I know is they were 15x12” aluminum. I powder coated them black at work.


Sent from my iPhone using Tapatalk