1980 Heater System Explanation

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

frwgt350net

Member
Joined
Jul 2, 2020
Posts
43
Reaction score
64
Location
California
First Name
frank
Truck Year
1980
Truck Model
K10
Engine Size
350
Can anyone lead me to any type of diagram and or explanation
or link on how the heater system works in a 1980 K10, preferably
starting from the switch on the dash.
 

Tank6x2

Supporting Member
Supporting Member
Joined
Mar 27, 2017
Posts
837
Reaction score
708
Location
Edmonton Alberta Canada
First Name
Kurt
Truck Year
79/86
Truck Model
C30
Engine Size
350, TH400.4:10 gears 2WD
There are manuals in this forum somewhere that have everything about these rigs, @bucket @HotRodPC may remember where
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,446
Reaction score
28,348
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
For some reason I can't copy and paste a link right now. Grrr.

Anyway, look in the library section of the forum.
 

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,266
Reaction score
2,210
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
The design also has quite a few differences for A/C vs non A/C trucks. For example, an A/C truck has a large black housing under the hood for the A/C evaporator, while a non A/C truck has a nearly flat firewall on the passenger side.
 

Craig 85

Full Access Member
Joined
Jan 25, 2017
Posts
3,917
Reaction score
4,116
Location
Nashville, TN
First Name
Craig
Truck Year
1985
Truck Model
K30 SRW
Engine Size
454/TH-400/NP205
Here's a few of the diagrams I've saved over the years. I'm not sure which year they are specifically for, but its generally the same.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

Craig 85

Full Access Member
Joined
Jan 25, 2017
Posts
3,917
Reaction score
4,116
Location
Nashville, TN
First Name
Craig
Truck Year
1985
Truck Model
K30 SRW
Engine Size
454/TH-400/NP205
Here an explanation of the air flow. Air enters the truck at the yellow arrow at the cowl. If you have an A/C truck, there is a plastic flap here that closes 80% of the fresh air flow off when on Max A/C. the air then comes out of the circle (where your fan motor is located) and into the plastic box (on an A/C truck). The air is cooled then it goes into the hole the red arrow is pointing to. Once back in the cab, the air will continue to the vents (dash, floor or defrost). If you were not cooling the air, the heater core is located inside the rectangular hole and would heat the air if needed.

On the A/C cab, when you turn on Max A/C, in addition to closing the cowl flap, the passenger kick panel door opens to recirculate air.

You must be registered for see images attach
 

frwgt350net

Member
Joined
Jul 2, 2020
Posts
43
Reaction score
64
Location
California
First Name
frank
Truck Year
1980
Truck Model
K10
Engine Size
350
Here's a few of the diagrams I've saved over the years. I'm not sure which year they are specifically for, but its generally the same.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach


Thank you very much - and have a terrific day
 

Forum statistics

Threads
44,168
Posts
950,793
Members
36,284
Latest member
RogerioHR
Top