wheels

  1. G

    Need information on 22” Forgiato wheels on my c10

    I need advice on what size wheels I can fit on my 1981 c10 fleet size stock suspension height I want to put 22” Forgiatos How wide can the front and rear be without modifications? What backspacing ? Any help will be appreciated thanks
  2. chrisd9997

    Whsts the biggest fattest tire I can fit?

    Picked up these vintage keystone turbine mags 15x10, two have 4" backspace other two 3.5" backspace. 4 1/4 center bore, bolt pattern 6 on 5.5. Came off a 72 blazer. My k10 has a 6" lift and a 10 bolt rear geared 3.08. Refreshed 700r4 with trans go kit.
  3. H

    Stock 1976 C10 - Need Wheel/Tire size help!

    Hello! I have a 1976 C10. The ride is bone stock and I’d like to keep it that way for the most part. The only thing I really want to change is in a perfect world I could find some 15 or 16” stock looking wheels that are wider with better backspacing and allow a wider tire solely for...
  4. Rich77

    Bolt pattern adapter

    Hello, Have any of used bolt pattern adapters? How do they hold up? Are there downsides to using them? I want 17x8 up front. That’s not a problem. I want 17x10 in the rear. I can’t get the rims I like in a 5x5(127). I can get them in a 5x114.3. Thoughts?
  5. L

    Deciding on new wheels

    I made a post recently on a certain set of wheels and ended up opting out. After research and measuring. I think I’m going to go with some American Racing wheels that are 17x8 and buy some 245/70/17’s to match, I know 245 is pushing it for that wheel width. But wanted opinions on if that would...
  6. samblnc

    73 C10 Factory Hubcap Options

    Can anyone point me to a reference guide or have any information to share on what factory hubcap options word for 1973 C10? These are mine, but I’m wondering if these were the highest option that year, and when the steelies with small center cap and beauty ring came out. Thanks.
  7. 1

    Will this work with 35s?

    Recently came across this listing on BaT with someone running 35s: https://bringatrailer.com/listing/1985-chevrolet-k10-silverado-2-2/ I know the tires are 35x12.50r15 and not sure about the wheel specs. I thought the general consensus here was that you needed a 4" lift with 35s to fit but that...
  8. M

    tire width vs wheel size

    I am looking for information on tire width vs. wheel size. I have a 1978 C10 (BIG 10) with stock wheels. I through on some tires at local shop just to get me down the road as previous tures were dry rotted. I am looking at lowering the truck slightly and I saw a guy running staggard on 15x7...
  9. tpripps

    16.5" wheel alternative

    So my newly-acquired pickup has the original 8.75x16.5 tires on the back, though it has 16 inchers on the front. I'm having a heck of a time finding low cost options for the rear. I'm looking for something to just get me by while i'm working on the rest of the truck. Basically looking for...
  10. chevyninja350

    Wide rear wheels.

    I am new to picking out wheels and tires, I am hoping to get some pointers. I have a 1985 Chevy C10 fleetside long bed, I am looking to run wide rear wheels in the rear. I want to run the widest possible wheel without tubing the bed, I want a 15-17inch Rim with a lug spacing of 5x5in (5x127). I...
  11. Dirtybirdjake

    Wheel back space

    Hi first time posting. Looking to get new wheels for my k10. Have crappy 10” wide wheels with spent tires so I’m trying to get a new setup before winter comes around. I have read elsewhere that a 4” backspace wheel will fit without hitting anything. However the wheels that I have on now measure...
  12. J

    Swapping from 15” to 20” Help with offset!

    Im currently running 15x10’s on all four with tires that measure 27” tall and 10” wide. I am lowered 2/4. My current rims are -44 offset/3.77” backspacing, which I don’t like. The rears are ok but the fronts stick out from fender at least 1” too much. I want to switch to a 20” setup but not...
  13. J

    Swapping from 15” to 20” Help with offset!

    Im currently running 15x10’s on all four with tires that measure 27” tall and 10” wide. I am lowered 2/4. My current rims are -44 offset/3.77” backspacing, which I don’t like. The rears are ok but the fronts stick out from fender at least 1” too much. I want to switch to a 20” setup but not...
  14. ShortNwide

    85 C20 LWB eight lug bolt pattern compatible late model chevy

    Does any one know what later model Chevy factory wheels will fit my '85 C20 ( If any )?
  15. 78Chubby

    Front Tire Width

    Hi all, I've lowered my 78 c10 about 3 inches front and back, and I'm looking for new wheels and tires. I want 20s on it, and I know you can put 20x10s on the back, but is that okay on the front too, or does that make sharp turns iffy? Thanks, Ryan
    • 78Chubby
    • Thread
    • drop size tires wheels
    • Replies: 0
    • Forum: Garage
  16. Rocky Veley

    Steel or aluminum wheels for a camper truck ?

    My 85 K10 diesel has eagle 16" aluminum alloy wheels. I run 265/75R16 10 ply tires. They look great on the truck. My problem is my slide-in camper. It weighs 1100 lbs. The truck can handle the weight fine with the 3/4 ton springs front and rear. It is the thicker alloy wheels that bother me...
  17. Rashad Baker

    Biggest Tire for 17x9 Wheel on a v1500 Suburban

    Hello everyone. I just picked up a 90 4x4 GMC Suburban a couple months ago and right now it has the 15inch wheels wrapped in 235/75/15 tires. I am looking to upgrade to 17x8 wheels with 0 offset and 4.5 backspacing. I Don't want to do a lift, but not sure how big of a wheel I can get away with...
  18. Best truck design

    3/4 ton? Wheels?

    Did I read some where, that Dodge 8 bolt 3/4 ton/1 ton Wheels are interchangeable with Chevy GMC 8 bolts? Thus the bolt patterns are the same?
  19. S

    Will a 24” or 26” wheel fit?

    Hi guys, i’m new to group. I have a 90 2wd 2500 suburban. I got it just to put a big stereo system in it, so it’s not a daily driver. Stock height, if that changes it will be lowered, maybe not. I want to put some 24” or 26” wheels with low profile tires on it. Anybody else ever done that here...

Latest posts

Forum statistics

Threads
44,416
Posts
957,136
Members
36,755
Latest member
square-up
Top