Hey all! I want this transfer case, its a 6 bolt housing Np205 I found locally but i think the listed price is too high, whats it worth? It looks like its been spray-bombed for camera but quite frankly looks like crap.
this might have been talked about before, but it would be nice for some clear information on it.
first here are some specs:
Ive got a 79 k10, sb350 going to a th350 going to a np203 full time no slip yoke.
we are doing a np205 swap, we have the truck down to frame with no current drivetrain...
Hey guys,
79 k10, Having issues with t. case where after 15-20 min of driving at 55 mph+ it pumps gear oil out of the breather tube.
I just got this in and it already had the full time 4X - conversion done where it's not full time now and i put locking hubs in. I put an elbow off the fill hole...
Based on reading online it sounds like this 4-speed with Low gear is a Muncie SM465 and the 4x4 Transfer case is NP205 - any recommendations for bolt pattern identification or otherwise?
Where the truck currently sits boxed in can’t easily crawl under, but will move soon.
Thanks - barn...
Recently stumbled upon a clean c10 for 1000 and a rusty k10 w a solid frame/engine/trans for 700. How difficult and or expensive would it be to swap the c10 body on the k10 frame?
I recently bought a '87 V10. When I got it the transfer bezel wasnt attached, just sitting around the lever. The lever was in 4L and the bezel wouldn't reach forward enough to be in the correct place. And the lever wasn't in the clear plastic guide. I tried to put it through the clear guide but...