Search results

  1. K

    C20 vs c10 spindles

    Thanks! I ended up ordering from switch so I should be good to go
  2. K

    C20 vs c10 spindles

    Thanks. That’s what I thought.
  3. K

    C20 vs c10 spindles

    Can anyone confirm that I can get c10 spindles for my 85 c20 and just ream the ball joint holes for the bigger ball joint and still run my 8 lug hubs. I read this somewhere and not sure
  4. K

    who has lowered their c20 suburban?

    I have done front springs and rear shackle so about 2-2.5" would like to go more and try to avoid a c notch but not totally against it. I was thinking spindles (if they're ever in stock) but not sure how to approach the rear, would like to keep some ability to tow.
  5. K

    Taking off passenger head about 37 bolts so far

    I'm starting to think this post is a troll. You can't possibly think you'll be fine using that transmission. I cant even understand why you didn't remove those bolts, you don't even need to get under the truck or need a special tool. The converter does not hold up the transmission...
  6. K

    Taking off passenger head about 37 bolts so far

    In all seriousness that trans housing is trashed. There is no way to make it work in that condition.
  7. K

    Taking off passenger head about 37 bolts so far

    gonna need another transmission too. how the hell did you mange to break that off?
  8. K

    4.1 mpg?

    I would avoid revving the guts out of it, the only limiter these old engines have is when it comes apart. I would get some of the previous mentioned issues resolved especially timing. Re check your firing order and then if nothing improves look into the carb but if you're not experienced you may...
  9. K

    Fuel issues

    I went through a couple parts store pumps in less than 300 miles. I bought an edelbrock and so far so good.
  10. K

    lowering a 86 c20 suburban

    85 3/4ton suburban.. I have already done front springs and rear shackle. I'd like to get another 2-2.5", on the front i plan to do spindles in the rear i have some questions. I want to avoid c notching is that possible? If so i was thinking using 1/2 ton leafs and air bags for when i...
  11. K

    Draining antifreeze before changing intake manifold

    Ya its not the prefered option but i was in a spot and it got me going. the system has since been flushed and all good.
  12. K

    Draining antifreeze before changing intake manifold

    I had a pin hole in an intake that was weeping coolant. I really didn't have time to pull it and replace or whatever so i grabbed a bottle of K-seal and dumped it in. stopped leaking in less than 10 min. and its been a while now so I'm just gonna leave it.
  13. K

    Help with wiring!

    sounds like the hgeadlight ciurcut is back feeding the ignition. I'd start by tracing that all the way back.
  14. K

    New to the forum and to square bodies wiper question

    Ya i'm definatly capable have all the tools (quality tools) and can do this this job. Its not that big of a deal that i'll mess with it now and probably wait till next winter when my cars sit because of the salt and snow. I will look at the easy stuff now though just to rule it out. Thanks for...
  15. K

    New to the forum and to square bodies wiper question

    Nobody has run into this issue?
  16. K

    New to the forum and to square bodies wiper question

    It’s a 1985 3/4 ton
  17. K

    New to the forum and to square bodies wiper question

    What would cause the wipers to cycle one time when i go to start? Occasionally is doesn't do it but most time it'll wipe once.

Latest posts

Forum statistics

Threads
44,160
Posts
950,627
Members
36,273
Latest member
dannyphx
Top