Search results

  1. Urbanburban22

    The Overlander: Gen3 LS, 6L90, MP1125 AND BODY SWAP

  2. Urbanburban22

    The Overlander: Gen3 LS, 6L90, MP1125 AND BODY SWAP

    Build updates: LS is finally in. Body swap went without a problem. Minor issues being different connectors for power locks, and some stuff on the steering column. Removed 90% of all the wiring. Only really left the HVAC and lighting alone. Using most every part possible from the 91 body for...
  3. Urbanburban22

    The Overlander: Gen3 LS, 6L90, MP1125 AND BODY SWAP

    Hey all! Making this thread to document the build, ask for advice, and answer questions for anyone who need help. So where to start? This all started a few years ago (3ish) when I bought my 91 Square V1500 suburban. With a poorly done respray and a lot of little problems here and there the...
  4. Urbanburban22

    Major rust repair 91 burban 1500

  5. Urbanburban22

    Major rust repair 91 burban 1500

    Hey all, solved my problem. Got a 1985 r1500 suburban roller. Minimal rust. Going to do a bit of a body swap. I transfered over the 4wd transtunnel from the 91 (fit like a glove) and put the 2wd out of the 85 in the 91. The 91 body is going to sit on the 2wd frame and become a bit of a rat rod...
  6. Urbanburban22

    Major rust repair 91 burban 1500

    So that all my rot, I have rear arch panels and the bottom panel for the barn doors. Like I said been looking for parts trucks or long beds to see what other options I can come up with.
  7. Urbanburban22

    Major rust repair 91 burban 1500

  8. Urbanburban22

    Major rust repair 91 burban 1500

  9. Urbanburban22

    Major rust repair 91 burban 1500

    That's awesome! How was attaching the new tubs to the rear quarter skins? Any major or minor problems along the way to look out for? Still haven't been out to the shop to get pictures for everyone, but I will here in the next few days. Your finished product is amazing!
  10. Urbanburban22

    Major rust repair 91 burban 1500

    I'll pull it all out and find out I suppose. Hoping I get lucky and find a nice roller. However I'm very curious to see if a truck bed would to the trick. Since it has to potential to be much cheaper. I've heard tale that the long bed wheel wells can be grafted into the suburbans with some...
  11. Urbanburban22

    Major rust repair 91 burban 1500

    Heya all! I've got some advanced rust on the Ole suburban. All the rust is in the rear quarters, and the wheel wells. The wheel wells are 75% just gone at this point. I cut the not savable parts of the rear quarter skins out of the truck and stripped the interior to see just how bad it really...
  12. Urbanburban22

    Tapping the Blower fan relay makes my blower motor work

    UPDATE: Removed Blower motor switch from the HVAC controls. Disassembled the switch (whatch out theres 4 springs and a small ball bearing) found the once "grease" dried up and caused there to be no connection between the contacts on the dial and switch body. Cleaned and reinstalled. LO,M1,M2...
  13. Urbanburban22

    Tapping the Blower fan relay makes my blower motor work

    No such luck with a sick move like that. I've got some down time at the shop today and plan to switch radios again, so I'll have the bezel off. I'll test the switch end of things, just want to see the PN before I order a new one. I'll update things later today.
  14. Urbanburban22

    TBI No Fuel Condition

    If you melted the ECMB fuese, you might check the ecm connectors to make sure all that is okay. along with checking the back of the fuse block. is 12v getting to the pump from truc wiring? Can you hook a test light to the injector connectors and see the light pulse when cranking? Any other...
  15. Urbanburban22

    Tapping the Blower fan relay makes my blower motor work

    Warrantied the relay for another OEM ACDelco GM#19288389 and I'm still in the same situation. Blower motor ONLY runs on LO, Unless I go under the hood and Tap the relay, Specifically with the switch set to HI (M1&M2 do NOT work). I have a resistor on order with NAPA, but that was recently...
  16. Urbanburban22

    Tapping the Blower fan relay makes my blower motor work

    Once off hi, if I switch it back to hi I have to tap the relay again to get it to work. I'm having my parts guys order me a new one on gm warranty. Might do the same with the resistor. I will check voltages from the switch when selecting m1, m2, and hi. Just haven't done that yet. Figured it...
  17. Urbanburban22

    Tapping the Blower fan relay makes my blower motor work

    My fan only works on low. Unless I switch it to HI, then tap the relay under the hood.
  18. Urbanburban22

    Tapping the Blower fan relay makes my blower motor work

    So here's the deal. A while back my blower motor went out. Put in a new Delco part and all is well. Now come December and the controls Intermittently work ( low, m1, m2, Hi). Then, they stop working. New Delco resistor, and relay were installed. Blower motor will work when controls are switched...
  19. Urbanburban22

    88-91 antenna base

    I bought, GM Genuine Parts 15829166 off the Ole Scamazon and I Don't recommend it unless you are willing to "Make" it work, it dose not fit the square burbans.
  20. Urbanburban22

    350 tbi timing

    Hey all, I was reading through this post before I went and checked my Base timing on the ole 91 Tbi burban. I disconnected the advance wire (tan and black) and got her up to temp. The PO had timing set at (approx.) 14Degrees Atdc! This made the old 350 make some sweet back firing noises on a...
  21. Urbanburban22

    Jeep Cherokee steering shaft on non power steering gear box

    I'd take a look at the inputs for the gearboxes on Pwr Steering then NON Pwr Steering trucks and go from there. As long as they look like the Pwr steering ones it should work fine. I had to use a bit of a longer bolt to attach the shaft to the column portion of my 91 but otherwise they're...
  22. Urbanburban22

    Anyone here setup HEI and a MSD on their 87-91 tbi small block??

    Found a cool old MSD video. I now under stand the differences and know this will work. Glad to know others have done similar set ups on here though. It's super cool!
  23. Urbanburban22

    Anyone here setup HEI and a MSD on their 87-91 tbi small block??

    I'm about to install this same setup. Would a MSD 6AL (part #6420) be the same be pretty much the same as a 6A? I think that's the only difference I have here. I'm getting the 8226 coil and the 8876 harness, so its fairly well plug and play. was just given this old 6AL and I'm hoping I can use it.
  24. Urbanburban22

    Dealer installed ac

    I'd verify your power to the switch and test to see if its going through. If that's all good check grounds. I personally haven't taken apart one of those controls yet, but if you can, maybe try to clean up the contacts on the switch. I've had a lot of luck with older electronics just by cleaning...
  25. Urbanburban22

    Dealer installed ac

    there's a few, can you post pictures of the mice damage? what are the plans for the rig?

Latest posts

Forum statistics

Threads
44,157
Posts
950,602
Members
36,273
Latest member
dannyphx
Top