Search results

  1. Clovis

    Tailgate band on sale USA 1

    I just tapped the dents out the best I could and got a new emblem from lmc not perfect but better then spending 350$
  2. Clovis

    Tailgate band on sale USA 1

    I don’t understand what makes these bands so expensive I would really like a new one for my gmc but the price is pretty steep
  3. Clovis

    Drive line

    Looks a little funny with the different colored bed but At least it fits. Looks pretty straight too.
  4. Clovis

    Drive line

    Thank you! I’m going to order it. Just for anyone wondering the 92 Chevy drive shaft was the correct length u-joint to u-joint but the length of the splined yoke is about 1 3/4 longer for the 700r4 and the yoke on the differential side is a little to wide. It could work if you find the right...
  5. Clovis

    Drive line

    Well truck is back together I have a drive line from a 92 I’m going to try out tomorrow i have seen some post saying they fit. The cut process when more smooth then I was expecting also flipped the axle today went pretty smooth also.
  6. Clovis

    Drive line

    It’s a one piece drive like that is necked down from 3.5in to about 2in on both ends they told me they would have to make a new drive line with my yokes and it would cost more then buying a new one
  7. Clovis

    Drive line

    I’m doing a short bed conversion on a 81 Silverado 350/350 combo 10 bolt rear. I’m using the brothers truck kit from holly. my local machine shop says my drive line can not be cut. Can anybody help me figure out what length drive line I will need
  8. Clovis

    L76 Rebuild

    Just finished a rebuild on a l76 it’s running the Texas speed kit being able to buy replacement o rings for the valley cover is a plus the kit was installed for the first time about 7 years back new o rings and back together seems pretty good quality to me
  9. Clovis

    Any recommendations for a new dash bezel?

    I got one form lmc pricey but good quality and covered the big hole in my dash that someone cut for a single din radio
  10. Clovis

    CNC machined emblems

    Huge hole in Billet emblems for square body’s I would love a set for my 87 gmc front grill look for some every so often never can find any
  11. Clovis

    New truck

    That’s what I plan to use the template is kinda expensive but I think it’s worth it
  12. Clovis

    New truck

    I’m going to shorten the frame
  13. Clovis

    New truck

    trim rings and hub caps came in today for a set a rally’s I robbed my buddy for now need to find some tires. Do a little tune up get it running the best I can then short bed conversion.
  14. Clovis

    New truck

    Not a new member but I got a new truck. Picked up this 81 long bed 305/350 for 2k. Lucky enough I also picked up a short box for cheep too. Chop coming soon
  15. Clovis

    AC troubleshooting

    Try and turn the pulley and clutch by hand if they turn put the belt see what happens. Maybe check to make sure the compressor still has oil. The 134r conversation is easy the adapters screw right into the ports already there. Check to make sure it will hold vacuum before you add refrigerant.
  16. Clovis

    What did you pay for a square

    I payed 3k for my 87 Sierra classic in may of 2020. After lots of work I made it from this. (picture taken the day I bought it) To this
  17. Clovis

    Recent 85 Sierra Classic Inheritance

    My short bed twin love the truck
  18. Clovis

    A/C and Cruise Control Vacuum Source

    But why is it needed why not just run a elbow to delete it instead of a T
  19. Clovis

    A/C and Cruise Control Vacuum Source

    I just got my a/c running this Saturday! It was about $350 all said and done I replaced the compressor, blower motor, and the dryer. I needed the belt too mine was running a shorter one to delete the compressor. I did notice the line to the accumulator was ripped I replaced it already but what’s...
  20. Clovis

    Returning after a few year hiatus

    I love the cream color. Are you planning to put a new transmission Like 4L65 or 4L80?
  21. Clovis

    New member in new mexico

    What’s up bro I’m the mentioned new member from nm my name is Clovis but I’m from Roswell
  22. Clovis

    1987 GMC Sierra classic

    Well I talked to the guy I bought the truck from and he said he had to re-wire the starter before so to check there and sure enough I could see the wires spark inside the crimped connecter I could tell that that power is ran to the starter then from there out to the rest of the trucks
  23. Clovis

    1987 GMC Sierra classic

    Thanks for the complements and tips guys no it’s not a show it’s just a bunch of my buddies the inside is a little ruff so I plan to Start there with it as I fix whatever happens to break I already had a lower ball joint separate
  24. Clovis

    starter wires

    I am planning on ruining new wires to the starter but I'm hoping one of you guys can tell me how the wires are ran. I can't find where they go after they pass through the heat shield by the exhaust
  25. Clovis

    1987 GMC Sierra classic

    Hey guys my names Jose Clovis I’m 18 and from nm I bought my 1987 gmc for 3 grand about 3 weeks ago I came to the forum looking for ideas on why my truck is dieing as I drive I chased the problem down to the starter wiring looking forward to driving her again my truck is a 350 with TBI true duel...

Latest posts

Forum statistics

Threads
44,161
Posts
950,631
Members
36,273
Latest member
dannyphx
Top