Search results

  1. mjck5

    Corvette servo

    Have been hearing about upgrading 700r4 with corvette servo, is it worth it? Also is it worth upgrading to the billet? Does that make the od better/stronger? It’s in a 86 k5 daily driver but used for towing and off road
  2. mjck5

    quadrajet question

    i have a question for all you quadra jet experts out there, i have deciphered most of the markings on my carb its a 17080204 and after that its 3529cpm, i figured out the 3529 is the date code it was made but what is the cpm stand for? also on the front of the carb is a grid with with A-L on the...
  3. mjck5

    f/w junction block to fuse block

    I'm trying to clean up my wiring harness on my 86 k5 that was butchered by previous owners, i think I've got it pretty much all back together except for one wire, its a 10awg wire coming off of the firewall junction block (10awg wire has a inline fuse spliced into it at junction block) and...
  4. mjck5

    headlight/seat belt buzzer

    just found out my 86 k5 originally had a headlight/seatbelt/ignition warning buzzer that was removed at some point, im wanting to put one back in, ive located where it plugs in but when i try to find one for an 86 all i can find is 6 pin that say their for an 86 k5, the spot for the buzzer in my...
  5. mjck5

    86 k5 headlight switch

    hey all, i am replacing the headlight switch on my 86 k5 and i have an extra wire im not sure about,the brown wire in the plug has two wires in it, one going to the running lights and one thats about4 to 6 inches long with a male spade connector on the end which isnt plugged into anything, this...
  6. mjck5

    a/c repair

    anyone in the group know of someone who works on stock a/c systems in the Milwaukee or Sheboygan area, ? i have an 86 k5, freon is gone so I'm guessing its got a leak somewhere, its all stock never been converted to new type of freon
  7. mjck5

    gas tank wont fill all the way

    i have a 86 k5, years ago when it was my daily driver i never had issues filling up the tank, now its back on the road after several years and when i fill it up it will only fill up about 3/4 of the tank before the nozzle shuts off, if i have the gas filling at full blast it will shut off a...
  8. mjck5

    k5 rear window

    i have an 86 k5 with electric rear window, when window is rolled down all the way it sticks about a 1/2 inch or so above the top of the tail gate, its been like this since ive owned it, i had to replace the rear window once because some one loaded something heavy into the back without opening...
  9. mjck5

    k5 tail pan replace

    hello all, i have discovered my tailpan in my 86 k5 is pretty well rotted out, from what i can see it looks like this is just bolted in with the floor spot welded to it, has anyone out there dealt with replacing this? any info/advice would be greatly appreciated
  10. mjck5

    86 k5 tail pan replacement

    hello all, i have discovered my tailpan in my 86 k5 is pretty well rotted out, from what i can see it looks like this is just bolted in with the floor spot welded to it, has anyone out there dealt with replacing this? any info/advice would be greatly appreciated
  11. mjck5

    dual exhaust kit

    was curious if anyone out there has installed a Dynomax Header-Back Dual Exhaust Kits 89005 on a k5 blazer, if so id love to see some pics of how the final product looks
  12. mjck5

    86 k5 long tube headers

    does any one have any recommendations for a decent set of long tube headers that will bolt up to an 86 k5 without any modifications (besides the a/c bracket)? bought a set of jegs headers that said they were for a k5 but my mechanic says they dont fit, what have you guys used and had good luck...
  13. mjck5

    hei vacuum advance stop plate

    i am replacing my intake manifold gaskets and i figured id put in new hei distributor while im at it, seeing as how i need to remove distributor anyways, im replacing it with an accell hei, when i opened the box it comes with a vacuum advance stop plate, my question is do i need this? and if so...
  14. mjck5

    distributor removal

    quick question for you guys, im replacing a bad intake manifold gasket(at least i hope thats the problem) my question is how important is it to have the distributor at tdc? or do you just have to make sure it goes in in the same position it came out? advice is allways appreciated
  15. mjck5

    hei distributor

    i am planning on swapping out my stock 86 distributor with new hei, i see them at 6500rpm 7500rpm and 9000rpm, hoping someone could tell me what the difference is in the performance, its going in a 400sb with rv cam so not a race car
  16. mjck5

    new member k5

    new member here, this is my 86 k5, been sitting for better part of 20 years time to get her back on the road

Latest posts

Forum statistics

Threads
45,355
Posts
981,402
Members
38,377
Latest member
Jcervantes2210
Top