Search results

  1. Georgeb

    Cab and bed mounts.

    You can also weld somthing to the head of the bed bolt. I have drilled a 3/8" hole through flat bar and plug welded it right on top of the bolt.
  2. Georgeb

    Homemade threaded insert/rib nut installation tool

    These are called riv-nuts and meant to be used as an insert through thin materials where you may not be able to or want to use a nut on the back side. Perfect for what you need. They even make them with closed ends for better weather resistance.
  3. Georgeb

    Homemade threaded insert/rib nut installation tool

    Nice. My only suggestion would be to use a hardened socket head cap screw as the puller screw because they last longer.
  4. Georgeb

    New Motor - Gold Specs in oil looks metallic and gold specs in filter

    What did you use for assembly lube?
  5. Georgeb

    Smoking on acceleration

    The last time I had exhaust hotter out one pipe than the other I had my exhaust valves adjusted a little too tight. I also had an ever so slight missfire.
  6. Georgeb

    TBI problems

    It's Cheaper than a towing and shop bill too.
  7. Georgeb

    Connecting with a laptop with Tuner Pro RT and DIY cable.

    Yes, I believe so but not sure where....
  8. Georgeb

    Connecting with a laptop with Tuner Pro RT and DIY cable.

    Sorry Sir but I no longer have the truck.:(
  9. Georgeb

    New Guy with "New Guy" questions....

    Well, untill the OP takes it apart you don't know any more About that motor than anybody else......
  10. Georgeb

    RockAuto.com Discount Code - Expires June 20, 2017

    Thank You!
  11. Georgeb

    Bvllsh!t on craigslist.

    Well crap.
  12. Georgeb

    Bvllsh!t on craigslist.

    Interesting speaker and head unit setup in this one. http://madison.craigslist.org/cto/5858009164.html
  13. Georgeb

    LS Conversion From 400

    I gotta agree with 1987 GMC Jimmy on this one. That is a sweet old truck and that 400 will most likely outlive any of us. The thermostat and and a good carb rebuild will go a long ways. Paying some attention to the distributer advance curve, vacuum advance to manifold and initial timing could...
  14. Georgeb

    New Guy with "New Guy" questions....

    I would think you will want to figure out what you have for specs like What heads, what size combustion chamber, what the bore and stroke actually are and what type of piston is in it. List that all off or ask for help here in figuring it out. With that there will be suggestions as to what cam...
  15. Georgeb

    New Guy with "New Guy" questions....

    Sounds like it's time to pick a new cam and change the recipe.
  16. Georgeb

    Header size

    Are you saying you want to use headers but run a single exhaust? If thats the case you may want to stick with the manifolds and Y pipe, ditch the catalytic if you don't have inspection to pass and install a good turbo muffler and tail pipe and call it good. 2.5" pipe will do fine for you.
  17. Georgeb

    1972 step side longbed

    It's got power brakes already. Add some power steering and a sway bar ans away you go!
  18. Georgeb

    1972 step side longbed

    Beautiful!
  19. Georgeb

    Blinkers dont work

    Check the fuse. Do the reverse lights work? They appear to be on the same circuit. Then try a new flasher relay. After that the power is fed to the plug on the column for the turn signal switch by purple wire. Do yourself a favor od go get a haynes manual at the parts store. It's not the best...
  20. Georgeb

    GMT800 2000 Hoe Rear Disc Brakes WTF?!?!?

    Interested to know the outcome. The rotors looked narrow to me.
  21. Georgeb

    C10 lift options?

    I think he meant he doesn't have deep pockets.
  22. Georgeb

    Exhaust Manifold with O2 bung...

    This is correct.
  23. Georgeb

    brake line replace

    You can make those coils by wrapping it around a soup can. Just take your time.
  24. Georgeb

    Blinkers dont work

    So you fixed it?
  25. Georgeb

    Blinkers dont work

    You shouldn't use 30w during the winter.

Latest posts

Forum statistics

Threads
45,478
Posts
984,238
Members
38,528
Latest member
PDlane200
Top