Search results

  1. R

    87 blower motor

    As far as I know there is only one wire that goes to the blower itself. If power is applied directly to the terminal on the blower motor itself it should run on high.
  2. R

    Fixing Rear Leaf Springs

    You might be able to get the ones you want from Amazon with free shipping if you're prime. Before I left CA last year I ordered all new springs for my blazer and got free shipping. Here's an example. A little more expensive but shipping is usually as much as the product now a days. Dorman...
  3. R

    Double cardan ball

    Ya, cause everyone has a J-23996.....
  4. R

    Double cardan ball

    Once upon a time I had a shaft built for me with a gm 3r double cardan joint in it. Many years later I went to rebuild it and found that the ball on that one was not replaceable, and was in fact a part of the yoke. Bummer. Went down to the junkyard and found a 70s Cadillac with the right joint...
  5. R

    Rochester Carb tune ; Which is best method?

    I've never had issues with the lean drop method. I have two small screwdrivers tucked away in the toolbox just for the mixture screws Lean drop is what the factory manuals specify.
  6. R

    Factory charge wire gauge

    The 75 wiring diagram says 12. Which is what I remember mine being.
  7. R

    Well, Here We Go!!

    Looks like a good starting point. Welcome to the "club". I really dig that siphon bulb in the fuel line. These trucks are pretty simple. Should be relatively easy to un-******* the jerry-rigging.
  8. R

    New guy with a ton of general questions...

    First, figure out all the things you might want to add to the truck electrical wise to figure out how many circuits you'll need, then double it. I started out many years ago adding a pair of lights, then another pair of lights, then a cb (shows my age) then a backup lamp, then.......... Then I...
  9. R

    Are these vacuum ports?

    Hot air choke pipes.
  10. R

    14 bolt spindle nut torque

    What he ^^^^ said.
  11. R

    Transfer Case Brace

    Page 7D-10 of the 78 service manual. I have a few manuals downloaded that I look through regularly so I only had to look thru a couple before I found it.
  12. R

    Transfer Case Brace

    Little late to the party but here's the diagram. Lol.
  13. R

    Deleting emissions,read this article.

    Biannual test exempt. Not smog exempt. That's the difference. There are still limits in place and they can pull you off the road to verify smog equipment is still in place on any vehicle since it is federal. Even though I had a CARB official openly admit that old cars add an insignificant...
  14. R

    Deleting emissions,read this article.

    And the EPA does actually do random on road sniffer tests. Had a club member 20 odd years ago get pulled over in nowhere San Diego county in his 72 blazer. Was handed a fist full of violations and spent the next 30 days collecting parts to put all the smog stuff back on so they wouldn't impound...
  15. R

    Bilstein Shocks Bushing/Sleeve Question

    Might want to check with the ORD guys but usually single fronts go in the other front shock position. That would make the angles better on the bushings.
  16. R

    A new Squarebody owner in Nova Scotia.

    Welcome. You're just down the road.
  17. R

    Axle swap help

    Same as a brake job just six more nuts to get the spindle off. Besides you'd want to go through any donor axle anyway.
  18. R

    Axle swap help

    You'd have to swap everything from the spindles out. 74 used the first design small bearing and 84 used the post 75 second design. Stub shafts should be the same but inner axel shafts are different if I recall between an D44 and 10bolt.
  19. R

    Axle swap help

    And you'll want to use your existing calipers as 74 should have 7/16 banjo bolts and 84 should be 10mm.
  20. R

    Stock front spring bracket and hanger replacement recommendations

    https://www.offroaddesign.com/replacement-hd-main-eye-spring-hangers-for-73-80-gm-4wd-trucks-pair.html They also have shackles that are a good upgrade from the stock shackles.
  21. R

    Broken hearted kid and fuel system

    Only other thing I can think of that hasn't been mentioned is if the return and supply hoses got switched accidentally it couldn't pull from the tank. Might want to retrace the routing.
  22. R

    2004 Silverado 2500HD 4x4 rattle noise from behind dash on driver's side.

    I have a 2005 2500. And occasionally have that jiggle, clunky sound. Never been able to find what does it. All the research I did on the interwebs pointed me at nothing. Some guys spent weeks insulating things, tightening things, padding things. All for not. I guess it's like the rear exhaust...
  23. R

    What’s this and where does it go

    I could be wrong, but from the location on pass side Id say air conditioning pressure switch. Did it ever, or does it now, have a/c?
  24. R

    Is this a correct bracket?

    https://www.gmsquarebody.com/forums/the-squarebody-reference-library.52/
  25. R

    Is this a correct bracket?

    Yes, illustrations are from the 1978 service manual posted in the reference section of the forum. The can on your old pump looks right. New one looks wrong. Your bracket looks to be from the 80s when they changed to the A4(??) A/c compressor. The brackets shown in the 1978 illustrations are...

Latest posts

Forum statistics

Threads
45,461
Posts
983,919
Members
38,510
Latest member
ExtraZ
Top