Search results

  1. C

    TH400 shift problems (At the column)

    Aw thanks for the reply. Turned out to be the steering column. Mechanic rebuilt the steering column for 420 bucks and now everything works great again. I dont know what he actually did inside that steering column but he completely removed the column and sent it to a shop.
  2. C

    TH400 shift problems (At the column)

    Bump......
  3. C

    TH400 shift problems (At the column)

    Hoping you transmission guys can help out with this. Im having problems shifting my TH400 transmission from Park to Drive. To be clear the transmission operates perfectly when in Drive shifting through the gears normally and it drives fine. The problem im having is with the column shift. When...
  4. C

    Slow and labored power windows

    I like the lmc relay kit because its super easy install with good directions.....i dont think i could build the relay kit myself.....i hate doin electrical......its a 40 dollar kit for 2 doors....comes with everything pre made.....i didnt even solder any wires just used the crimper and butt...
  5. C

    Slow and labored power windows

    I just recently did the lmc truck relay upgrade on my suburban. Ended up replacing drivers side door switch....4 switches in one assembly. And the pigtail... Still had problems until i realized the connectors that go to the motor were bad....replaced 2 connectors at front two motors....and now...
  6. C

    Door hinge repair....

    Note regarding hinge pin replacement.......hinge pins must be pressed in with a press.....i tried and failed with big hammer and even a vice.....
  7. C

    Door hinge repair....

    So looks like all the torque from the hinge spring went into the lower half of the hinge.....single bolt....causing excessive strain on the door hinge mount where it broke.....instead of dispersing the torque across the entire hinge assembly and 3 mounting bolts
  8. C

    Door hinge repair....

    The cut hinge pin was done by me for removal.......im not referin to hinge pin....heres another pic of hinge after removal........
  9. C

    Door hinge repair....

    Well think i found the problem.....frickin hinge was broke....the connector piece holding the top and bottom of the hinge is just gone......wonder how that happened the door been working fine for years lol....
  10. C

    Door hinge repair....

    Oh and i like my doors......theres no hole in the bottom where everybody likes to put speakers......
  11. C

    Door hinge repair....

    Another pic
  12. C

    Door hinge repair....

    Driver door makes loud pop sound when opening or closing. Took a closer look and it looks like the lower single bolt on the upper hinge.....door side not truck side...the bolt hole is cracked around and the metal is flexing a lot....anyone have this happen? Any easy fix? Pull the door off and...
  13. C

    No high speed fan/blower

    Nice....thanks
  14. C

    No high speed fan/blower

    Nice....thanks
  15. C

    No high speed fan/blower

    I thought the stock setup was the high speed wire runs from the relay straight to the motor for straight 12v power.....I'd like to hook it back up that way if I could figure that out
  16. C

    No high speed fan/blower

    Well it had a fried wire behind the dash.....its running 3 relays...one for each blower speed....and the high speed line is running through the regulator then into the blower motor.... I replaced the bad burnt wire and now I got a 3 speeds working......hope it don't keep fryin wires though cuz...
  17. C

    No high speed fan/blower

    High speed blower has been working off and on but finally quit on me. Low and med still work. Been research in this on the web and noticed I can't find a high speed relay. Truck is orig non ac 1989 suburban V2500. At some point someone had installed aftermarket ac which I removed. So wiring on...
  18. C

    Truck tilts when steering

    My truck has close to zero, if any, frame movement when steering lock to lock, stopped on level ground, as shown in the pics. I do have the ORD steering box brace installed, and no sway bar. Im thinking maybe your springs are softer than mine causing the frame to tilt, my springs are very...
  19. C

    Truck tilts when steering

    Second two pics are the full left and right turn showin the frame height
  20. C

    Truck tilts when steering

    And no sway bar hahah.....i was told drop pitman arms are bad......i just have the 4in raised steering arm
  21. C

    Truck tilts when steering

    Full left turn or full right turn i still have 15 inches between top of axle and bottom of frame......
  22. C

    Truck tilts when steering

    15 inch from top of axle shaft to bottom of frame is 6 inch lift...6inch tc ez ride srings.....
  23. C

    Kick panel vents

    OK cool I thought I had the wrong vents in there......just need to pick up another pull rod from somewhere...
  24. C

    Kick panel vents

    Anyone know whats wrong with this kick panel vent? The plastic pull rod is slightly bent up to where it hooks on to the vent. I only have the one plastic vent rod the other one on other side broke off..... Could the vent doors themselves be mounted upside down? Looks like the hole for the rod...
  25. C

    Heater box question non AC truck

    1989 suburban V2500

Latest posts

Forum statistics

Threads
44,617
Posts
962,612
Members
37,158
Latest member
thom9719
Top