Search results

  1. jfkelley

    Opinions Needed on Square Body Gauges LS Swap

    After looking at these online I don’t have the budget for this ..But man it looks soooo good !!
  2. jfkelley

    Opinions Needed on Square Body Gauges LS Swap

    I’m finishing up my 1976 K10 4x4 5.3/4L60e swap ..I purchased an 1990 Suburban Electric Speedo Instrument Cluster Assembly but the printed circuit on the back is trashed & no one offers a repo where the accessory plug goes into a lot of the fingers are missing ..Really wanted to make the factory...
  3. jfkelley

    Fuel pump wiring issue LS Swap

    Found an unused plug that said AC on it turned key on touched probe to it and said 12 volts put a spade on the 14 gauge wire and plugged it in ..Thanks!
  4. jfkelley

    Fuel pump wiring issue LS Swap

    Guys on these two pics attached where it states #86 on the relay Red Fuel pump power wire can someone tell or show me where this wire goes to @ the fuse box ?
  5. jfkelley

    Question about exhaust 5.3 LS Swap

    Well, the ones I bought won’t fit over mine transmission crossmember guess it’s different of 4 x 4… I will put these on Facebook market and just take it to a exhaust shop
  6. jfkelley

    Fuel pump wiring issue LS Swap

    Is my old harness reworked by BC Performance out of Oklahoma
  7. jfkelley

    Fuel pump wiring issue LS Swap

    Yes sir it has a Basic tune in ut ..It starts and runs but only with the fuel pump wire connected directly to the battery ..
  8. jfkelley

    Fuel pump wiring issue LS Swap

    Guys need some guidance..I have an 1976 K10 4x4 with 5.3 /4L60e with stand alone harness ..I have power to everything except my fuel pump wire coming out of the harness ..I can get it running with the wire straight from the in tank fuel pump to the battery ..I ohmed the relays everything...
  9. jfkelley

    Question about exhaust 5.3 LS Swap

    I found a pair of BBK Cat Delete for 2014 Camaro SS on FB Market going to try them hoping they will clear everything on my K10 4x4
  10. jfkelley

    Question about exhaust 5.3 LS Swap

    I have an 1976 Chevrolet Scottsdale K10 , 5.3 / 4L60e / NP241C with 2015 Camaro stock manifolds ..My question is what Pipe can I scavenge from Salvage yard for my set up from exhaust flanges back ? Thanks in advance !
  11. jfkelley

    Need Help with Cab firewall wiring junction box

  12. jfkelley

    Need Help with Cab firewall wiring junction box

    1976 K10 Scottsdale ..I need help with where all the wires go that's on my firewall junction box .I spend alot of time out on the road covering three states and for some reason thought I would be able to remember where they went when it come time for reaasemblej ..When I did my engine swap I...
  13. jfkelley

    1991 electric suburban Speedometer into a 77 K10 square ls swap

    On the 76 Schematic I’m looking at I see the following and I really had to squint DK Green - Temp Tan - Fuel Oil Mechanical Cluster lights- Grey Ignition -Pink Light Blue - Left indicator Dark Blue Right indicator Fuel Sending Unit is it Tan or pink ?
  14. jfkelley

    1991 electric suburban Speedometer into a 77 K10 square ls swap

    Hello All !..I have searched and searched the internet for my answer & I find myself coming back to this forum looking for help and its been very helpful ....Can anyone show me how to repin a 91 suburban speedometer to work on my 77 Chevrolet for my VSS . I did a LS engine swap from a 2003...
  15. jfkelley

    What color is the wire for the fuel gauge?

    Ok I think I get it ..That wire connects to the back of the Fuel Gauge ...? Am I wrong?
  16. jfkelley

    What color is the wire for the fuel gauge?

    If I understand this correctly I attach my Sending unit fuel gauge wire to the pinkish tan wire ?
  17. jfkelley

    What color is the wire for the fuel gauge?

    I have connected my sending unit wire to both Tan with White Stripe and Tan ( Maybe Pink Faded wires ) one at a time and it goes all the way to the 3 o’clock position.. am I doing something wrong?.. The wires I have on the driver's side are the following ..Keep in mind this is going to be the...
  18. jfkelley

    What color is the wire for the fuel gauge?

    ..
  19. jfkelley

    Bulkhead wiring ..HELP ..1976 K10

    I’m almost finished with my LS swap 5.3/4L 60 E/NP 241.. on the Internet there’s several videos, stating how to wire your bulkhead into the existing harness… But my bulkhead harness has a wire missing..The first picture is my wiring harness. The second one is one that’s floating around on the...
  20. jfkelley

    LS Swap 5.3 Exhaust Question

    Im close to completing the 5.3 / 4L60e LS swap on my GM 76 K10 four-wheel-drive… Im using the stock truck exhaust manifolds and they fit between the frame rails but very tight ..Someone told me to use 2010-2015 Camaro manifolds ..Can someone confirm this ? Thanks in Advance
  21. jfkelley

    What color is the wire for the fuel gauge?

    I have a 76 K10 I'm doing an LS swap in it came stock from factory with dual tanks..Im going to one tank with electric fuel pump inside the 87 TBI tank on the drivers side I want to use the factory wiring so I can run the factory fuel gauge ..My question is can someone tell me what color is...
  22. jfkelley

    4L60e Torque Converter in a Bind

    @Matt69olds..I measured from flywheel to TC Tab and got .136 that night .. ..The next morning I went out and was turning the TC by hand and pushing towards the rear end & it seated my gap is a little wider now it’s spinning in the bell housing by hand ..I can see it’s in the pilot bushing and I...
  23. jfkelley

    4L60e Torque Converter in a Bind

    These are pics of where the TC is now ..The. Lot in the second one is barely threaded in ..Do You think I need spacers ?
  24. jfkelley

    4L60e Torque Converter in a Bind

    FYI I should have included this in the original post : The TC was not bolted to the Flex plate when I turned the Engine by using the Break-over bar
  25. jfkelley

    4L60e Torque Converter in a Bind

    Thank Matt ..Lesson learned and I was almost done with the swap ..Now have to pull transmission and transfer case ..So disappointed..

Latest posts

Forum statistics

Threads
44,613
Posts
962,509
Members
37,152
Latest member
5280k20
Top