Search results

  1. kleedus

    2 wheel drive s10 blazer

    almost have the engine ready to fire up. just have to hook up a couple vac lines and splice in a short length of fuel line. got the drop kit parts look good and just ordered new fenders for it. next week I am going to order the cowl hood.
  2. kleedus

    1985 k5 4x4 5.3l vortec swap

    where did you get the an adapters on the sending unit? I might do the same for my fuel lines in my crew cab
  3. kleedus

    New Member/Project

    good truck to start with I would swap the semi floater rear axle for a full floater
  4. kleedus

    Sell me on a cummins

    when I do a budget I figure costs as best as I can get the number then double it then you will be close to the real costs. after interior, stereo, other goodies and paint I will probably be over 20 grand in my crew cab. if you want towing capacity and are worried about the frame I would just...
  5. kleedus

    Sell me on a cummins

    I got over 13 grand in my crew and its not even close to being done but its a complete frame off custom build I got over 2 grand in my 4l80/205 combo a stock 1 ton 4x4 square body has a 10,000 pound gvwr 2 wheel drive 1 tons are 9,000
  6. kleedus

    my GETRAG G360 crapped out NV4500 swap on the way need help with crossmember

    i wont be able to dig one up till Monday
  7. kleedus

    my GETRAG G360 crapped out NV4500 swap on the way need help with crossmember

    no 89 k2500 is the wrong body style I have a couple I would sell you 1 for 40 bucks plus shipping and as for your question on spacing the mount if you look at the pic I posted of the energy suspension mount it shows my 1/4'' spacers 1 on top and 1 on bottom to get a 1/2'' the 1 ton frame is...
  8. kleedus

    my GETRAG G360 crapped out NV4500 swap on the way need help with crossmember

    first thing is your nv4500 from a dodge or a chevy. I don't know what it takes to put a 205 on a dodge nv4500 but I know you can build a dodge/chevy hybrid nv4500. dodge front input shaft and chevy rear output. the cross member you need is from 85 up chevy I am pretty sure they used the same...
  9. kleedus

    1991 Cluster for 4L80-E Swap?

    if you can find a 241 from a turbo 400 it might be able to bolt up with the 4l80 adapter. but a 205 would probably be easier to find. with the advance adapters kit you can use a 205 from a 4 speed they are easy to find. and if you don't mind throwing money at it northwest fab sells...
  10. kleedus

    1991 Cluster for 4L80-E Swap?

    the computer uses the input speed and the output speed sensor. you can get the sensor that goes inline with the speedo cable from jags that run. http://www.jagsthatrun.com/Pages/SpeedSensors_Speedometer.html your 203 will have to be from a turbo 400 or the spline count will be wrong and the...
  11. kleedus

    my nv4500/205

    I used a cross member from a 80's half ton with a 700r4. I had to put the cross member inside the frame and spaced the tranny up a little also. details are in this thread on page 2. the oil for the nv4500 is a special oil just for the nv4500 since it has carbon fiber syncros the 205 calls...
  12. kleedus

    How to replace Blown fusable link;??!!

    a lot of people think the link is the connector but it is not it is the short section of wire from the plastic connector to the end. it can be repaired.
  13. kleedus

    1991 Cluster for 4L80-E Swap?

    and yes the 91 cluster will work with the 4l80 vss the 4l80 has a input speed sensor and a output speed sensor on the left side 4x4 transmissions may not have the rear sensor since it has one on the t-case. In my pics above you can see the speed sensors on my 4l80 I was going to use...
  14. kleedus

    1991 Cluster for 4L80-E Swap?

    the 4l80 needs the out put speed to operate if its a 2 wheel drive you can use the rear speed sensor on the tranny but a 4x4 would need to be on the t-case so when you use 4 low it reads right I put a vss on a 205 for my 4l80 in my crew cab
  15. kleedus

    78 parts

    I can dig around but can't promise a time deadline
  16. kleedus

    2 wheel drive s10 blazer

    ordered a bunch of parts from rock auto plugs wires cap rotor idler and tensioner got 5 quarts of oil and a oil filter and just ordered a pair of 2'' drop spindles and 3'' rear blocks to drop it now I am out of cash for parts for a little bit but I got enough to keep me busy for a...
  17. kleedus

    78 parts

    I have a couple other hydro boost pedals if I can find one I will let you know
  18. kleedus

    Herculiner to paint truck?

    look up monstaliner
  19. kleedus

    Weatherproof my interior

    monstaliner as a undercoat and on the rockers fire wall floor and back of the cab I paid 119 bucks a gallon and bought a 30 dollar under coat gun off ebay its a roll on bed liner but it sprayed good
  20. kleedus

    what exactly does this do?

    it is a fiber optic wire like previously mentioned it light up your ash tray it can be removed with no issues other than a dark ash tray. no big deal
  21. kleedus

    Is this the spindle I need?

    I have a handful of 10 bolts and dana 44's but will not have time to pull a spindle till next week.
  22. kleedus

    Blower motor!

    1 blower motor screeched but worked 2 thought it was a good one it worked fine before I parted out the truck it was in but it did not work when I installed it 3 blower motor worked when I hooked power to it to test it but when I installed it it did not work at all
  23. kleedus

    Is it my heater core?

    antifreeze actually causes electrolysis that eats away at aluminum parts as it get older it becomes acidic and you can test it with a multimeter https://www.youtube.com/watch?v=vKryQVfnDHI that's why you should change it every few years even if it looks good
  24. kleedus

    Is it my heater core?

    I would not use dex cool on anything I even swapped my 07 over to the green stuff I bought a truck with a 454 in it that the previous owner ran dex cool in it the motor leaked coolant at every gasket that the dex cool touched thermostat housing intake and head gaskets. they were all...
  25. kleedus

    Blower motor!

    I just went threw 3 used blower motors today before I got one to work right on my 85 c10. I had to replace my water pump thermostat and blower motor to get my heater working right. and I still need to change the blower motor relay cause it only works on high.

Latest posts

Forum statistics

Threads
44,616
Posts
962,605
Members
37,155
Latest member
Troyport
Top