Search results

  1. kleedus

    1991 Chevy Suburban Speedometer/instrument cluster

    have you had a chance to get the shipping price so I can pay you
  2. kleedus

    Monstaliner

    I did not thin it at all it looks a lot like rhino lining the texture it has I played with the air pressure until I liked the way it sprayed it was a undercoat gun I posted a link to the same type of gun in my previous post in this thread its hard to explain the spray pattern it had
  3. kleedus

    Fuel in My oil pan

    I had my jimmy overflow the carb and completely fill a 454. the jimmy was a diesel and had no vent in the tank the heat of the day pressurized the tank. and in 3 hours the 454 was full of gas hydro locked the motor and bent 2 rods. I changed the sending unit to a gas one with a vent make sure...
  4. kleedus

    700r4

    it is a 1987 np 208 no need for pictures that tag says it all there was no 203 t case in a 87 and the 203 will not bolt directly to a 700r4 it can be done but not really a fast easy swap that some would do check the linkage like suggested pull it off the shifter and see if you can get it to...
  5. kleedus

    700r4

    that is a 208 looks like the 8 stamped funny I would think shift fork issue the fork spreads and does not engage the gears right so you might be in neutral and that might be why the no go
  6. kleedus

    78 parts

    I have someone else interested in the hydro boost set up off the 78 dump truck its one of the things I need to get caught up on but I think I may have that plate on another cab that I have when I get on days off again I will look around
  7. kleedus

    Monstaliner

    the truck is still a project in the works and progress has been slow for awhile. I have never driven it just been collecting parts and money for it hopefully it will be the project in the garage this winter. I sprayed the fiber board top to my tool box at the same time as I did the...
  8. kleedus

    78 parts

    its going to take me a little time to catch up on the parts list you guys are asking about I am working some overtime at work
  9. kleedus

    Monstaliner

    I used it as an undercoat on my crew cab but I sprayed it with an undercoat gun I bought off ebay for under 30 bucks http://www.ebay.com/itm/UNDERCOATING-SPRAY-GUN-w-CUP-Auto-Truck-Bed-Liner-Coating-Chip-Guard-Paint-/191152899265?pt=LH_DefaultDomain_0&hash=item2c8199c4c1 I like the ay it...
  10. kleedus

    1991 Chevy Suburban Speedometer/instrument cluster

    I can do paypal let me know how much and email adress
  11. kleedus

    1991 Chevy Suburban Speedometer/instrument cluster

    figure out a shipping to rock springs wy 82901 let me know and how to pay
  12. kleedus

    1985 k5 4x4 5.3l vortec swap

    I am interested in how you hook up the tv cable from the 700r4 I have a low mile 5.3 less than 60,000 and a rebuilt 4l80 just trying to decide what I want to put it in. I have a couple c10's I could put it in I will follow your build
  13. kleedus

    1991 Chevy Suburban Speedometer/instrument cluster

    this is out of a 91 with the electronic speedo? can you send me a picture of the back? I am interested if it is the electronic speedo for sure
  14. kleedus

    Body Lift Bumper Bracket Fabrication

    cut the front 3'' of the frame off (frame horn is what I call it) move it up 2'' or 3'' what ever size body lift you have then weld it back on and brace it before you ask about how strong or weak it is how strong do you think a cheesy bracket is
  15. kleedus

    Write up: Gas Tank Relocation

    ya the picture with it clamped on was the mock up the picture of the x member is the finished x member I used a unmodified rear x member and the modified front it is mounted just like a blazer is I can weld a gas door in the bed side easy enough so it would fill just like a blazer as...
  16. kleedus

    Write up: Gas Tank Relocation

    its the 31 gallon blazer tank also roofing tar paper works great for a isolating pad between the x members straps and the tank
  17. kleedus

    Write up: Gas Tank Relocation

    its basically the same as a blazer the way I done it I have not dealt with the filler yet but I have an idea to put it behind a hinged tail light. or just put a blazer gas door in the bed side
  18. kleedus

    Write up: Gas Tank Relocation

    I used blazer x members to put the blazer tank in my crew cab I had to modify the front one a little. basically I cut the ends off moved them up 2'' and welded them back on and braced them the truck frame steps up over the rear axle where the blazer one is straight that's why I had to...
  19. kleedus

    poly vs rubber motor mounts

    I run poly engine and tranny mounts and body mounts I have had to replace to many shit ass Chinese made rubber mounts cause they sagged and mushed allowing the motor to move all over it tightens everything up and allows some more vibrations to transfer but I can live with that. import cars...
  20. kleedus

    1991 Chevy Suburban Speedometer/instrument cluster

    are any of the mounting tabs broke?
  21. kleedus

    my nv4500/205

    this is the cheapest I have found the oil for the nv4500 yet http://www.gmpartsdirect.com/results.cfm?partnumber=12346190 and good info for the nv4500 http://en.wikipedia.org/wiki/New_Venture_Gear_4500_transmission
  22. kleedus

    my nv4500/205

    just a public service notice here before you put your 205 on the tranny and every time you take your t case of change the input seal and use the double lip seal. even if it looks good change it its cheap. the oil for a nv4500 is really expensive and you do not want it mixing with your t...
  23. kleedus

    4X2 to 4X4

    I put a 2 wheel drive high hump 4speed cab on my 4x4 wrecker bolted on no trouble t case cleared the floor as well and it is a lot easier to swap the body
  24. kleedus

    ideas for taller nv4500 mount

    it actually has 1/2 more room than a half ton with the same cross member so exhaust should not be a problem. I will be running stock manifolds and a stock y pipe from a suburban with the same cross member so it should fit with no trouble the driver side should fit easy the pass side can be...
  25. kleedus

    my nv4500/205

    stock manifolds with stock y pipe into a flowmaster for now later maybe 2.5'' duals no frills using what I got to get the truck together. I will use it to haul my artic cat wildcat and maybe to pull my camper and some light duty hauling. It will have a 10' flatbed on it and its a dually

Latest posts

Forum statistics

Threads
44,617
Posts
962,635
Members
37,158
Latest member
thom9719
Top