Search results

  1. 7

    Knocking noise in D and R after high revs

    Has the oil pressure dropped?
  2. 7

    Glow plugs half work

    It should start on four glow plugs, especially all on the same bank. It'll smoke some but it'll go. How cold is it and have you checked the fuel for water?
  3. 7

    10 bolt front differential question

    I believe you are asking whether or not the pinion and ring gear need to be clocked in the way they came apart? If so, then no. Just make sure the shims go back in the same places.
  4. 7

    Turbines!

    I thought these would sell fast. You can't even buy the tires for 1800 bucks..
  5. 7

    Gas to diesel

    Hard to beat a duramax swap.
  6. 7

    Quadrajet Mystery and questions

    The buick carb will have a straight inlet fuel line. I thought the thermostat housing on a SBC made it unable to run a straight inlet carb.. i seem to remember trying this years ago and it didn't work.
  7. 7

    How many bolts hold the transmission on and where?

    Step one is to pull the crossmember to tilt the trans down. Also make sure to pull the distributor cap on a chevy. With the trans tilted back you can easily get to the bellhousing bolts from down below.
  8. 7

    Turbines!

    I have two sets. First are the 16.5s shown below. These are a matching set of four with 33x12x16.5s vortrax radial tires. Two tires are new with less than 1k miles on them. The other two have around 5k on them. I have 5th tire that is a spare with no rim, it has a cut in the sidewall that...
  9. 7

    8 lug slots...?

    Thats all I know of in a radial tire. I was hoping BFG would do another run at some point.
  10. 7

    What have you done to your square lately??

    I have to dust the snow off, hitch it to the trailer and drag a couple Buicks home Monday..
  11. 7

    8 lug slots...?

    Yes the tires are great. They are 33x12.50x16.5. They are radials so they ride very nice. I had to get one warrantied and vortrax was great to deal with. Their rep told me they make two runs of 16.5s a year and don't plan to stop production anytime soon. I may list them for sale pretty soon. The...
  12. 7

    8 lug slots...?

    I like the turbines. I have a set on my 77. Had to buy vortrax 16.5s for it.
  13. 7

    ANYONE USED VORTEC HIGH SWIRL HEADS ON THEIR GEN-I SBC?

    They were the best factory head for the OG SBC. For the right money I would definitely use a set. They were covered extensively by car mags in the late 90s and early aughts, so there is a ton of info out there. The biggest draw back is the intake requirements at this point..
  14. 7

    Any decent aftermarket 73-80 fenders?

    I have a set of NOS fenders for my truck. I plan to do re-arcing of the wheel opening with the next phase of the truck. I would hate to carve up and section NOS fenders but would also hate to use Chinese garbage fenders for the job. Is there anything out there that actually fits and isn't...
  15. 7

    Rochester Quadrajet Woes

    Yep, most folks think as long as a carbed car starts and runs its good enough. I've seen plenty of very high dollar cars that have brand new carbs that barely function.
  16. 7

    Rochester Quadrajet Woes

    GM also spent hundreds of hours fine tuning them by application using tools that nearly no one else had access to at the time. And folks throw them away for a generic build holley or AFB and never even try to tune them. Its bananas.
  17. 7

    Jet Performance Quadrajet JET Performance anyone gotz?

  18. 7

    Jet Performance Quadrajet JET Performance anyone gotz?

    As a guy who has worked many q-jets, I would strongly suggest not buying one that hasn't been tailored to your engine.
  19. 7

    Rebuild th400 or 4l80e?

    The vent on the trans is probably plugged. Some mud wasps likely filled it in. It's common for something that sits. Clear that, change the fluid and go live your best life.
  20. 7

    Two owner flatbed

    Did you figure the gear ratio when you had the cover off?
  21. 7

    Help identify strange noise at Highway speed

    Put a boot over the hole first. There are a lot of normal drivetrain nosies that you don't hear.
  22. 7

    84 k5 Stock fuel Guage stuck on 1/4 tank???

    Good deal. My fuel guage is also a bit wonky, and I've checked everything but the guage. I hadn't realized until I read your fix that I never tried a different guage, but I've checked the wires 30x..
  23. 7

    What have you done to your square lately??

    I have some junk I bought 10ish years ago. I cranked the welder up and twisted some wires together..
  24. 7

    What have you done to your square lately??

    I gotta put the plow on soon.
  25. 7

    84 k5 Stock fuel Guage stuck on 1/4 tank???

    Check them both- engine to frame and the engine to body..

Latest posts

Forum statistics

Threads
44,460
Posts
958,367
Members
36,842
Latest member
FarmC10Red
Top