Search results

  1. E

    Horn has no power

    Ok fam. I’ve took the advice you guys gave and I have some results. I didn’t trust my relay so I did couple tests. Ran voltage to the hot and ground to get it to click and we had 12 v on the black green wire. So that works. I then decided to watch a video on my non functioning horns. Very...
  2. E

    Horn has no power

    It’s all good man I appreciate any insight. It’s a horn how hard can it be right, it’s just the final thing to do for me to get it passed and on the road. I got the just of it all, and got power to the relay. No clicks. When I benchmarked the relay with 12 v it clicked. So I’ll ground it out and...
  3. E

    Horn has no power

    Thanks everyone for the help, I’ll use this information and see what I come up with.
  4. E

    Horn has no power

    I have no continuity at the relay or any power
  5. E

    Horn has no power

    I have continuity in the steering wheel. Fuse is good.
  6. E

    Horn has no power

    How do I check continuity?
  7. E

    Horn has no power

    Hey guys. When I hit my grant horn button I don’t even get a click at the horn relay. Fuse is good. Any advice before I dig into it tomorrow ? I took it relay and put power to it and it was clicking. The first thing I do tomorrow is to take it out again and test to see if I got hot power going...
  8. E

    Wipers have one speed

    I cleaned all connectors as well as I could, and I have high and low working correctly. As well as park. I hope this thread helps someone out. Feel free to ask.
  9. E

    Wipers have one speed

    So I did some more investigating. Firstly I wanted to solve the “park” issue. Had 11+ volts on the connector so I did the jumper wire and the motor moved. So I cleaned connector and wiggled it with key on and wipers in park and the wipers parked. WAS SUPER STOKED. On to the next issue, the...
  10. E

    Wipers have one speed

    Can’t be switch because I have power to connectors.
  11. E

    Wipers have one speed

    So I did some investigating. Cleaned the connections on the park switch. Without the wiper module, no change. So I checked power to connector, 12 v. On high and low. Plugged everything back in and just one speed. So I put direct power to the motor and ran like it should on high and low. So I’m...
  12. E

    Wipers have one speed

    Thanks
  13. E

    Wipers have one speed

    My parking switch was corroded. How would one clean that out in such tiny space ?
  14. E

    Power door lock issue

    This thread saved me, I thank you all. I found a cut driver wire for the actuator motor, my power accessory circuit breaker was blown, and that relay is way hidden and the actuators weren’t even plugged in. Plugged them in, got power. And bobs my uncle. Thank you all
  15. E

    Wipers have one speed

    I can’t be rebuilding I don’t think, tho it was very well described. I’d rather just get a new motor if that’s what it is.
  16. E

    Rochester Carb tune ; Which is best method?

    Yeah that’s a good idea I believe mine has the same. I’ll try the lean drop. All the vacuum lines are going to make it tough.
  17. E

    Rochester Carb tune ; Which is best method?

    Ok so this is best way or how does it oppose to vacuum
  18. E

    Rochester Carb tune ; Which is best method?

    Ok. My screws are the D shaped ones. Which I had to get a tool for. Hard to get at with all the vacuum hoses
  19. E

    Wipers have one speed

    My wipers only have one speed and I have to turn them off at the bottom of the wiper stroke. Any suggestions?
  20. E

    Rochester Carb tune ; Which is best method?

    I just need to know the best method of tuning. Lean drop or vacuum
  21. E

    Rochester Carb tune ; Which is best method?

    Before I bought the truck. The previous owner said it was, but never tuned it after getting it back.
  22. E

    Rochester Carb tune ; Which is best method?

    Both have been double checked.
  23. E

    Rochester Carb tune ; Which is best method?

    Hey everyone, I’ve got access (finally) to my mixture screws on my Rochester quadrajet and I’m wondering what’s the best method of tuning the old gal. On YouTube, I can see the vacuum method but I’ve been advised to do an rpm method? I have the supplies to do both. Truck is an 85 350...
  24. E

    Fuel pump fuse for compression test

    Thanks for everyone’s help. I did it without turning fuel pump off and she’s 150 every cylinder.
  25. E

    Fuel pump fuse for compression test

    I’m trying to do a compression test and having trouble finding any info on the location of the fuse or the relay? 1985 sbc 350 c15

Latest posts

Forum statistics

Threads
44,435
Posts
957,841
Members
36,802
Latest member
mcflurry
Top