Search results

  1. A

    Transmission Upgrade?

    I've got a flat bed, in any case.
  2. A

    Transmission Upgrade?

    Thanks for the info, Eric. Mine was a stock TBI, but we went back to a 4 barrel carb on it. I think my tires are 33's, I'll have to check for sure. How do you check the rear end gearing? Does it say, on the differential? I'm kinda a newb at this stuff. Regardless, I'll be getting down to 2000 or...
  3. A

    Transmission Upgrade?

    Hi all: I've just recently got my 89 V3500 back on the road. It's got the TH 400 transmission in it. 454 motor. I can't remember what the rear end gearing is (I didn't mess with it). When I discussed it with the machinist who rebuilt my engine, he didn't think I'd get more than 1 or 2 mpg...
  4. A

    1980 Squarebody Dually: Pictures Added

    Here are some pictures of what I've got. It's got a good set of front fenders, as you can see. The 350 is in my shop, it ran when I pulled it out a year or so ago. Transmission is still on the truck. Rust on the hood is surface, no holes in it. Doors have rust on the bottoms, and you can see the...
  5. A

    1980 Squarebody Dually: Pictures Added

    Will do. I'll take a few this afternoon and post. Aaron
  6. A

    1980 Squarebody Dually: Pictures Added

    Last call. If nobody wants this truck as-is, mid-April I'm going to cut the frame apart and make a trailer out of the back end. Aaron
  7. A

    Hanging I-Beam from ceiling joists

    Cool setup. I just did this in my shop, with a beam that around 8 1/2 feet long. I had to put in an extra wood beam to do it, will post a pic when I think about it, I'd be interested in seeing others' setups like this, too. Aaron
  8. A

    1980 Squarebody Dually: Pictures Added

    If you're seriously interested, let me know, and I could probably hang on to it a bit longer, if I had a definite timeframe. Aaron
  9. A

    1980 Squarebody Dually: Pictures Added

    hey everyone, I've got a 1980 squarebody dually. If somebody wants it, it's yours, make me an offer. Here's the skinny: When I got it, it was running, and I drove it to my place about a year and a half ago or so. The guy I got it from had rear-ended somebody though, so the hood and front end...
  10. A

    Dumbo mirrors

    If I could add a question, as I was intending to post this anyway... How do you guys keep your dumbo mirrors from perpetually creeping back? My old ones on my 89 V3500 did that. They were rusty, I got a new black set from LMC, and these do the same thing. Aaron
  11. A

    Anyone have a LS swapped 3+3?

    Thanks for the opinion. I'll pass that on to my machinist fried who rebuilt the engine. Is there another thread here where people have real-world comparison like this? If not, I should start one.
  12. A

    Anyone have a LS swapped 3+3?

    Brief hijack, @ Old77: How much of that 13 mpg do you attribute to the 4 speed trans, versus having TBI? Just curious. On my recent rebuild of my 80 3+3 (not a dually) we got rid of the TBI, installed a 4bbl quadrajet, and kept the 3 speed auto trans, since the machinist who rebuilt my engine...
  13. A

    Cab mount bolt fell out

    I nearly had to do that cut-a-hole-in-the-floor routine, to get my old mounts out. I think on one of them, I drilled a small hoel from up top, shot a bunch of pbblaster in there, and then heated it from the bottom. My seat belt bolts were even worse. Aaron
  14. A

    Cab mount bolt fell out

    So even weirder: I get under the truck last night...and I didn't even lose the lower part of the bushing. The grease I used when I put the two halves together must have created a vacuum in there. I'm going to be checking those bolts fairly frequently, I think. I live on a pretty bad road...
  15. A

    Cab mount bolt fell out

    Yeah, I thought of the odds of that happening, myself. I got hit by lightning once, in my teenage years, maybe I have a weird effect on odds, now. And yes, Scott, I'll definitely be checking all the other bolts too. Maybe I did forget that one. I was a total newbie when I started this project...
  16. A

    Cab mount bolt fell out

    All: This forum seemed like the best place for this question... Yesterday, one of my daughters discovered one of my cab mounting bolts laying in the driveway, along with the washer. When I remounted my cab (truck is here...
  17. A

    recommend some tough seat covers

    Any of you guys have a the front bucket seats with the flip-down console in the middle? I'm trying to find some covers that will fit that particular seat configuration. Aaron
  18. A

    Source for those black fender flares?

    Yeah, I know about the rust thing, my originals had the chrome on them, and that's what they did. Mostly, I was thinking that it would solve my dirt problem, and that it would cover up my bad bodywork around the fender wells. I don't think I could fit a set of front mudflaps in, without...
  19. A

    Source for those black fender flares?

    All: Anyone got a source for those black fender flares that wold fit my 89 V3500? Just need the front ones. I'm striking out so far. Something like in picture is what I'm looking for. Can see here: https://www.gmsquarebody.com/threads/89-v3500-rehab.33188/page-2#post-876687 the problem I'm...
  20. A

    New member from Montana, '81 C10 longbed, 250 6 cylinder

    Welcome, Larry. I'm down in Dillon. Feel free to get a hold of me, if you're down this way. Aaron
  21. A

    Replacing headlights

    Thanks for the advice. I'll look back at that and see if I can get to those torx heads. I think LMC's grille must be a tighter fit than the OEM ones. Aaron
  22. A

    Replacing headlights

    hey guys, this is probably a really dumb question, but... I can't figure out how to replace the low beam headlights on my 89 v3500. I just put an aftermarket LMC grille on it. Do you actually have to remove the grill, to get the old headlight out? from the front, it looks like the headlight...
  23. A

    recommend some tough seat covers

    Thatnks for the replies, folks. I'll probably decinde for sure what I'm doing, sometime this winter, since it will probably take me that long to get the rest of the interior done. Aaron
  24. A

    recommend some tough seat covers

    I'm in the final stages on my 89 crew cab 3+3. I want to get some real tough, comfortable seat covers for my front seats. It's the buckets, no headrests, with the center seat with the flip down console. Anyone got a recommendation for seat covers you've put through the wringer and have held...
  25. A

    Source for 4" backup lights?

    Ahh, thanks for the clarification on LED's, everyone. I clearly didn't read far enough into the subject to realize that this was only an issue with the flashers. This simplifies my life a good bit. And to clarify, it's a flat dump bed, not a trailer. I'm getting close enough to finished that...

Latest posts

Forum statistics

Threads
44,405
Posts
956,799
Members
36,719
Latest member
atup1996
Top