Search results

  1. jwgreen

    Windshield wiper/washer issues

    So I went and checked all the grounds and wiring according to Snoots post and all seem good. But this problem is still there intermittently so I'm guessing its going to be the module. Guess I'll order one and see if it totally fixes the problem. If not then I'm thinking maybe the washer pump...
  2. jwgreen

    Windshield wiper/washer issues

    Thanks Snoots I'll give the info a look over and see what I can figure out.
  3. jwgreen

    Windshield wiper/washer issues

    Hey guys, Trying to figure out a little washer/wiper issue. So I have a 84 GMC with pulse wipers and washer. The wipers seem to work fine until I try to use the washer. When I press the squirt lever the pump just clicks and then the wipers stop working. Then the wiper will not start working...
  4. jwgreen

    Power windows slow

    I have already installed a HD relay kit from another source but they are still slow and sticky!!!
  5. jwgreen

    Power windows slow

    Hey guys so I rebuilt both my doors with all new weather stripping and window channel runners, new window regulators w/motors and a relay setup that is supposed to put more power to the motors to deal with the problem of slow windows. But the windows are still very slow and stick in some...
  6. jwgreen

    Oil in intake runners

    Used straight edge to check the head surfaces and as far as I could tell it all looked flat. No signs of oil leakage past the gaskets that I could tell or in the pcv hose. The intake was an old cast iron intake from a stock engine. There was definitely oil in the intake runners on the of the...
  7. jwgreen

    Oil in intake runners

    So this is my first rebuilt engine. I had the shop rebuild it to a long block then I put all the other parts back on. Not sure how it ran prior to rebuild as I pulled it and had it rebuilt before ever running it. The intake seemed to be a stock one but cant say for sure it if was the one that...
  8. jwgreen

    Oil in intake runners

    Hi all, Been having an issue with a freshly rebuilt sbc 350 smoking. Thought it might be that the rings have just not seated as it doesn't have many miles on it yet but it was just smoking too much for me to believe that. So I talked to the shop that rebuilt the engine and they believed it...
  9. jwgreen

    Rear Diff Pinion Shaft

    After a little further investigation and calling the GMC dealership I have found that the part number is 14012700 and these can be had very easily with a search on the interwebs. They are called both "pinion cross shaft" and just "pinion shaft". Just in case someone else has the need for one.
  10. jwgreen

    Rear Diff Pinion Shaft

    Thanks guys, Yes it's the shaft in the center of the diff carrier. Not the pinion input shaft with the gear. I looked it up on a parts diagram and that is what they called it "pinion shaft". Anyway I will check with Advance Auto to see if they can locate me one. Thanks again everyone for...
  11. jwgreen

    Rear Diff Pinion Shaft

    Can anyone tell me where I might be able to acquire a pinion shaft? I've searched the interwebs but it only seems to come with a carrier or gear set. I really don't need a carrier or anything else just the pinion shaft that goes into the center of the carrier. Any advice would be appreciated.
  12. jwgreen

    84 Headlight buzzer install

    Thanks hatzie, I looked at that thread but missed the second page where it tells me exactly how to hook it up. Here's the installation instructions on that thread if anyone else needs them.
  13. jwgreen

    All my lights went out

    Hey guys just wanted to give an update. I installed the JCase fuses and they have been working great! One did blow but that was because shorted the positive to ground by accident so the fuse did its job. Great this is that they are super easy to replace, just pop the bad one out and put the...
  14. jwgreen

    84 Headlight buzzer install

    Hey all, I have a 84 that I want to add a headlight buzzer reminder onto. I've searched the forum and found some advice but my truck doesn't have the courtesy block down by the gas pedal. There is a relay or 2 down there but I can't tell what it's for. I picked up the buzzer from LMC but the...
  15. jwgreen

    All my lights went out

    I have installed the fuses but have not gotten it fired up and running yet. I will update you guys when I get it running which should be middle of next month.
  16. jwgreen

    All my lights went out

    So after much research this is what I have come up with. They do make a "Slow Blow" fuse in a Jcase style. They sell the holders in a couple styles but I think the inline will work for my application. I have determined that the wire size for the circuits I want to replace Fusible links in are...
  17. jwgreen

    All my lights went out

    Sorry I mistyped that. I meant to say Mega Fuse, not Maxi Fuse
  18. jwgreen

    All my lights went out

    Did you use a blade fuse or a maxi fuse? My understanding is that a blade fuse will not work but a maxi fuse will.
  19. jwgreen

    All my lights went out

    So I was wanting to replace the fusible links with a maxi fuse. How would I figure out what fuse size I would need? Also seeing as how there are multiple fusible links would I need multiple maxi fuses?? Or could I combine some or all of them into one or two? 84 3/4T V8
  20. jwgreen

    Relay vs vacuum switch

    Maybe try one of these setups?? http://www.bmracing.com/products/70244-converter-lockup-controller-for-gm-automatic-transmissions-using-lockup-style-torque-converters/
  21. jwgreen

    Vortec heads- cold weather issues?

    Hi guys, New to the forum and was just browsing when I read this thread. I did a little research and found a possible solution that might work better as it appears you can turn it on and off whenever you like. I know nothing about cold weather problems as I live in the south. Take a look and...
View older results

Latest posts

Forum statistics

Threads
44,398
Posts
956,605
Members
36,703
Latest member
Monstah911
Top