Search results

  1. Jarhead79

    Edelbrock 2101 intake

    I don't want to sell this but I'm in a tight spot and need some cash to fix my other truck, is anyone interested in this for $100.00 and shipping? I have PayPal.
  2. Jarhead79

    vibration 35mph and 70mph

    Jack the front up and take a pry bar and stick it under the tire and pry on it or have someone do it and watch for play in the ball joint. Is the truck lifted or lowered? May need to check your caster/camber. My trucks has cut coils in front and needs some bushings and end links, in less than...
  3. Jarhead79

    NEW window/lock harness vs OEM

    I can keep an eye out, but thought I'd ask, I still need to get new motors, and would like to replace the harnesses etc.
  4. Jarhead79

    vibration 35mph and 70mph

    I'd check your calipers in front for play, does it pull at all? It coul still be a thrown belt even in a new tire. You could place something stationary next to the tire as it is jacked up and spin the wheel and see if at any point the tires comes closer to the fixed object.
  5. Jarhead79

    NEW window/lock harness vs OEM

    Just curious if you ever do any trading etc? Lol
  6. Jarhead79

    TBI 350 Loping like it's got the cam I wish it had... need help

    It'll continue to click, that means it's as far forward as it can go, unplug it then shut off the motor, then plug it back in and restart the motor
  7. Jarhead79

    92 Chevy 305 TBI issuess

    I don't have the ohm meter to do that, but I put a new tps on it and can't get it to stop throwing the code 22, went ahead and got s new ECM, didn't change anything and also a new electronic spark control module, I done with wasting time and money at guessing, I still think it's gonna be the...
  8. Jarhead79

    TBI 350 Loping like it's got the cam I wish it had... need help

    You need to reset the IAC, put a paper clip in the obd port in the a and b slots, on mine it's the farthest right upper tw, then turn acc on, should hear clicking noise in the IAC, it's fully closed now. Then unplug it, then remove jumper pin and start it, then plug in the IAC.
  9. Jarhead79

    92 Chevy 305 TBI issuess

    Well still not running correctly, I changed cap and rotor and plugs, so it does run better but still not wanting to start up quickly, when it does it starts up then falls on its face and dies. I changed out the throttle position sensor and can't get the code 22 to go away which makes me think...
  10. Jarhead79

    Lowering the rear

    It rides fine, I don't think you'll really notice much of a difference, might go with a decent new shock to make up for the helper spring.
  11. Jarhead79

    pics Please

    Lol here ya go
  12. Jarhead79

    92 Chevy 305 TBI issuess

    Does it make any difference if it's a 305 or 350 pump? Trucks a 305.. well guess I could check at work and see if it's the same part number. Only reason I'm strapped is j helped a friend with her suv, cost me 700 dollars to keep her and her kids with a vehicle. She's had a bad run of luck. Bad...
  13. Jarhead79

    92 Chevy 305 TBI issuess

    Yeah I can hear the pump and it's getting fuel, but seems just not on startup, which leads me to fuel pump pumpor filter, but while it runs and idles just fine, just not taking off and when shifting it acts as if it's cutting out I'm sidelining the truck and driving my 79 for now but I don't...
  14. Jarhead79

    92 Chevy 305 TBI issuess

    No data logging, and no trouble codes, I'd like to get a fuel pressure test but my filter is rusted on,...lol changed a while back after doing a pressure test, so now I have to figure out how to get the filter off without destroying the lines.
  15. Jarhead79

    92 Chevy 305 TBI issuess

    So here's my dilemma, have the above mention 92 305, it's not wanting to start tight away, sometimes fires, then drops out and dies, when I do get it running it stumbled back for a while but kind of lines out, recent changes are as follows, IAC, and reset it, tps, changed electronic spark...
  16. Jarhead79

    Tips and advice for first Quadrajet rebuild

    Talk to Quadrajet Power here on the forums, he builds theses a carbs and has a great rep for building for your engine size etc. Unless you just have it in your head you want to do it yourself, that's cool but if you have doubts, talk to him!
  17. Jarhead79

    new to site could use help

    Yip I believe sooooo.
  18. Jarhead79

    One window works-ish, the other doesn't

    There's a guy on here named gmachinz who builds the wiring harnesses for the windows. Might see if he has or makes the relay harnesses also......nm gmachinz posted above! Lol
  19. Jarhead79

    new to site could use help

    There is a for sale section but you have to have a minimum amount of posts
  20. Jarhead79

    73 GMC Grille

    Going to be hard to find the OEM grill with the 350 emblem provision unless you find a good old OEM one. Otherwise you should be able to find the 350 emblem and attach it to a new aftermarket grill.
  21. Jarhead79

    tunnel ram intake sbc

    See now that's something I would like to try, something different, but old school
  22. Jarhead79

    dropping gas tanks?

    I've dropped newer Chevy gas tanks etc, but not these older ones, I'm needing to pull out my 88/98 split bench seat out so I can clean up the floor and patch some holes in the kick panels and such. The previous owner drilled holes and bolted the seat in and the tanks hinder me from removing the...
  23. Jarhead79

    spring hanger

    I plan on doing this at some point, if not just back halfing it.
  24. Jarhead79

    spring hanger

    You should move in with me long enough to do this, lol I want this soo bad
  25. Jarhead79

    tunnel ram intake sbc

    Anyone running a single carb tunnel ram? I've been wanting to do a tunnel ram for a long time, I know they may not be as popular now days but I'm sure some others love the looks of them. I just want something different and thought I'd go this route.

Latest posts

Forum statistics

Threads
44,173
Posts
950,868
Members
36,288
Latest member
brentjo
Top