Search results

  1. Darth Plasma

    Wiring issues

    Hello everyone. I have a slight issue with my '87 V10 that i recently did a cab swap on. I just "finished" up the wiring, the cab i swapped onto it is slightly older and doesn't have factory A/C so there's a few challenges to overcome with wiring. There may or may not be a few stray wires i...
  2. Darth Plasma

    Reverse light issue

    Another related question, I'm swapping out a cab and I need to transfer out the fusebox and all the wiring to the new cab, and I know theres a big box with all the wires coming out from the fusebox (I think?). So is that like a plug that I can unplug that whole wiring harness, or would I have to...
  3. Darth Plasma

    Reverse light issue

    Thanks for this info, I'll take a closer look.
  4. Darth Plasma

    Reverse light issue

    My 87 K10 has aftermarket brake lights and a set of really old reverse light/license plate lights and I took the bed off yesterday to discover that the reverse lights aren't even hooked up. There's just plugs for it, and I looked around a bit and couldn't find the other end to plug into it. I...
  5. Darth Plasma

    Low Beams Don't Work

    I’m gonna go check the ground. My dad pointed out that my ground connections looked pretty bad so I’m gonna go check that out
  6. Darth Plasma

    Low Beams Don't Work

    I took my 87 K10 out for a drive last night and guess what. Pulled the dimmer switch and only the parking lights come on. No low beams. But the high beams work fine (I do have a burnt out headlight, and they're all pretty weak so i gotta replace them anyways) So i had to drive around on high...
  7. Darth Plasma

    How to adjust shift linkage? Can't fully shift into park gear

    Thanks for the help. I will take a look at this in the next few days and see what I can do. I don’t think there’s slop in it, it just won’t fully go into either end. I’ll probably adjust it from park because I don’t care about the lower gears
  8. Darth Plasma

    How to adjust shift linkage? Can't fully shift into park gear

    My '87 K10 has a 4 speed with OD (i think?) from an early 90's silverado, it's the tranny that reads P R N OD D 2 1. Well the shifter only physically moves from like half into the slot of P and doesn't really go into the 1 slot probably because something with the linkage wasn't...
  9. Darth Plasma

    tilt sloppy, won't lock in place

    I have the same issue with my steering column. It's a late 80's early 90's column from a Blazer or a Silverado and the tilt steering will not lock into place.
View older results

Latest posts

Forum statistics

Threads
44,168
Posts
950,804
Members
36,286
Latest member
goodwrenchca
Top