Search results

  1. Obwonkonobe

    Wiper diagnosis

    Yea the po had the tank out and all the lines off. Ive just never gotten around to putting new lines in and making a new tank
  2. Obwonkonobe

    Wiper diagnosis

    I've got a switch on the dash, 3 positions including when it's off, and you can push it in, for what im guessing is a shot of fluid. Il try giving it straight 12 volts when i get the chance but the grease sounds interesting too. Anyone know how the linkage can be accessed to be lubricated? Also...
  3. Obwonkonobe

    Th350 from heck

    I've been looking for an oversized oring for the Speedo, where'd you get yours?
  4. Obwonkonobe

    Th350 from heck

    @MikeB never thought of a cast pan, sounds solid thanks. And no i haven't looked at the vent at all, how would i chech it without removing the trans?
  5. Obwonkonobe

    Th350 from heck

    I have a stock th350 in my 78 c10, 350 350 combo. And it leaks pretty bad. It leaks from the pan, rear driveshaft seal, and speedo. Ive replaced the pan gasket, Speedo bullit and oring, tail housing large oring to the trans, tail housing bushing, driveshaft seal, and the yoke with one that...
  6. Obwonkonobe

    Wiper diagnosis

    It rained for the first time in an eternity here in Arizona yesterday, and i figured I'd give my wipers a try. The KINDA worked, but they were struggling hard. They would crawl accross the windsheild, no matter what position the switch was in. I haven't trouble shooted anything yet, but my guess...
  7. Obwonkonobe

    Heads and headers

    Yea if I wire wheel it clean and rattle can it with high temp, nothing's ever really a problem
  8. Obwonkonobe

    Heads and headers

    Would anyone recomend making custom headers?
  9. Obwonkonobe

    Heads and headers

    I've heard that rust will come off after driving due to heat, could I just roll with that or should I take the rust off before hand, id prefer to have it clean
  10. Obwonkonobe

    Heads and headers

    https://phoenix.craigslist.org/wvl/pts/d/headers/6449749712.html Any thoughts on these?
  11. Obwonkonobe

    Heads and headers

    Ive got a stock 350 chevy with my 78 c10. My plan for it is to give it vortecs down the road, but for now i wanna put some headers on it. Im thinking about some short tube headers, gonna be looking in craigslist. I have dual 2.something exhaust going off current manifolds. I can weld decently...
  12. Obwonkonobe

    Stores Don't Sell Speedo Cable Lube Anymore - Now What?

    I just bought a little thing of white lithium from the store and let the cable get covered in it as I fed it back into the sleeve, worked pretty well, still bounces a little tho
  13. Obwonkonobe

    Amp settings and speaker placement

    Yea I've been considering that but I'm not sure if having then close like that will do any good, I already have tweeters in the 5 inches in the doors
  14. Obwonkonobe

    Amp settings and speaker placement

    Yea I've seen those head liner units and agree. I have a couple 2x4s that I could put in the dash, anyone had those turn out well?
  15. Obwonkonobe

    Amp settings and speaker placement

    As of right now i have a 4 channel 50 per channel kenwood head unit, and a mono 300w kenwood amp. These push 2 75w 5inch speakers off the head unit, and a kicker 300w r10 sub. What should i set the input sensitivity at on the amp, and what could i do for more speakers, not sure if i need any...
  16. Obwonkonobe

    Rocker arm ratio

    @Honky Kong jr that's the video I watched right before this post that got me thinking :Big Laugh:
  17. Obwonkonobe

    Rocker arm ratio

    I have a stock 78 c10 350 motor, standard stuff. I was wondering if it would be doable to up my rocker ratio to get more lift. Im pretty sure I have a stock cam and rockers. If anyone has had any success with this feel free to recommend a new ratio brand etc, thanks
  18. Obwonkonobe

    Fuel pump help

    Alright, so in my 78 c10 i put in dual tanks myself, pulled a switch from the junk yard and did all the hose routing etc, and it mostly works. But when i accidentally run all the way out of gas and get air in the line, its a bitch to get started again. Normaly i just have to get hacky with the...
  19. Obwonkonobe

    Speedo headaches

    @chengny il have to try that out tomorrow, il let you know how it goes
  20. Obwonkonobe

    Speedo headaches

    @Rusty Nail lol its more satisfying when you go past all the numbers.
  21. Obwonkonobe

    Speedo headaches

    That makes tons of sence, I bought a new cable from Amazon but never thought about lubrication. Il check for kinks tomorrow, in the mean time what lubrication should I use? And how would I apply it? I figure it can't hurt to just try both things
  22. Obwonkonobe

    Speedo headaches

    Alright, so I've got a Speedo that's been giving me some weird problems. I rebuilt it from 2 differs,t ones, used the better needle, betrer faceplate, better Speedo guts, etc. The odometer is rotated up just slightly, this may be from where I made a new odometer holder thingy out of a credit...
  23. Obwonkonobe

    3rd Time Trying to Get Temp Gauge to Read Right - No Luck

    I had the same problem, I hope this makes your day. Take the needle off of the gauge, heat the motor up to operating temp, and put the needle back so it points to the correct temp, use a fork to take it off if you need to. Just be sure to get like an infra red temp reader thingy, and check temp...
  24. Obwonkonobe

    Need obscure bearing

    Yea sofar ive found an austin Martin motor with the same size, but too obscure. And i found a post from a guy saying he ran a 1.75 rod bearing in his honda k24a, but then said it was an ls bearing. Is anyone familiar with what he may be talking about?
  25. Obwonkonobe

    Need obscure bearing

    Anyone know of any good ones of those? Or any motor that's used a 1.75 bearing? Crank, cam, rod, whatever. Anything will work lol. Half of me is considering just sending it with the Damn knock
View older results

Latest posts

Forum statistics

Threads
44,168
Posts
950,803
Members
36,286
Latest member
goodwrenchca
Top