Search results

  1. spanky55amg

    updating wiring question

    I’m going to find this. Thanks!
  2. spanky55amg

    updating wiring question

    Yeah. I’m going from a 10SI to a CS130. I don’t know what amps the 10SI is but the CS130 is 105.
  3. spanky55amg

    Bvllsh!t on craigslist.

    You questioned the mirror but not the exhaust? haha. WTF did they run over with it looking like that?
  4. spanky55amg

    updating wiring question

    Ok. So I am cleaning up the wiring with the engine and transmission R&R and taking away some of shotty audio cable that was used. I read the big 3. The shotty audio wiring from the PO did do some of that. I read at least 4ga wiring at least. 1. Would 4 ga welding cord be sufficient? Have you...
  5. spanky55amg

    Aftermarket trans crossmembers

    Im not swapping at this time. I am only replacing the "oem" one since it is mangled and wasnt bolted correctly. So it was a 305/350 truck. It has a 1973 350 and a 700r4 whose rebuild date, if thats the date written in tamper proof marker, was 2014. But shits not right with it. Whats going in is...
  6. spanky55amg

    Aftermarket trans crossmembers

    Correct. It is. Thanks for the offer, but I think I will just go aftermarket (just for the fact that ls swap in the future.)
  7. spanky55amg

    Aftermarket trans crossmembers

    I will take all those points. I guess I should’ve prefaced that I’m being a penny pincher. But I guess money spent now is less money spent later.
  8. spanky55amg

    Aftermarket trans crossmembers

    Hey, Im bringing this up from the dead from last year before I start a new one. The one from CPP is like $80/90 and Summit is right down the road. So no shipping. Scotty's is $125 and I might be able to pick one up from him (if he has them built and allows me to pick it up) this week. I dont...
  9. spanky55amg

    Right side wiring harness

    I usually think about Californians, but... the question is how good this wiring is because of the PO. I’ll check it out and if it’s half way reusable, I’ll keep it.
  10. spanky55amg

    Right side wiring harness

    Thank you! I think I ended up pulling the Tip-in because it wasn’t connected to anything, who’da thunk? I had planned on doing what you said, but measure twice, cut once. And I didn’t want to cut anything I shouldn’t. But anyone with a clean firewall doesn’t have that harness.
  11. spanky55amg

    Squares around the Square

    I’d be game. It’s not too far away.
  12. spanky55amg

    Right side wiring harness

    Lol. I mean, you can come over and help if you’re that free. No I’m serious. None of this was hooked up to anything and I dug for a few hours trying to figure out what all of those should go to and if any of it is needed.
  13. spanky55amg

    Right side wiring harness

    what is the wiring harness on the right side that comes through the firewall. I assumed that spark control but I have 0 emissions on the truck. So do I need any of it? And if not, what do you use to plug the hole?
  14. spanky55amg

    Mechanical oil pressure guage fitting

    Hell, my wife harbors less shit then this, and I am married to her and have said way worse things.
  15. spanky55amg

    Mechanical oil pressure guage fitting

    You did what, have a crush on me and was sad that I had to take time away from the forum because of work and life? Lets squash this shit here and now. If you want to play the victim card, lets get you over it. 1. It was a two way discussion, Im not the only one to blame. Hell, you didnt even...
  16. spanky55amg

    Mechanical oil pressure guage fitting

    @Honky Kong jr *****, looks like we need to squash some shit..... First, this engine has been on its way on out the door. But When you are doing 80 mph, there really isnt shit I could have done. You're right, a gauge would have been helpful slightly, but when an engine is toast, its toast. I...
  17. spanky55amg

    Mechanical oil pressure guage fitting

    Thanks man, that help. I might be able to make that work like that.
  18. spanky55amg

    Mechanical oil pressure guage fitting

    The engine I bought has a fitting for what I believe is a mechanical oil pressure guage. Should I just replace it with a bolt or find a cap and do you know what size I need .
  19. spanky55amg

    Another vortec thread

    Well I want to keep the serp belt from the engine I'm getting. Mine has a pre-79 v belt drive. I'll check out the fan and clutch. Thank you!
  20. spanky55amg

    Another vortec thread

    Driving home, my engine decided to chunk something . I have a line on a cost effective vortec that already has a carb intake . 1. It doesn't come with exhaust. I've seen where people say headers hit the frame. What headers do I need and do I have to do to make them fit? 2. My alternator and...
  21. spanky55amg

    small block to big block radiator

    Ohhhhhhhhhhhhh Thanks @bucket and @Craig 85. I was assuming it was two different parts like the small blocks.... That makes sense. So just 16, shroud, and 4 pads. Thanks y'all.
  22. spanky55amg

    small block to big block radiator

    I have purchased a big block replacement radiator. I was told that I needed to switch out the brackets, but I have the over-the-top bolt brackets. Looking at LMC, they dont have specific mounts for 81-87 454 brackets. LMC does show 81-87 support pads (9). Are the brackets the same? I know I...
  23. spanky55amg

    87 gas tank in an 84

    I have crap always getting clogged in my Qjet filter. Im not sure where its coming from but all of the rubber back to where it goes from the passenger frame rail to over to the tank has been replaced. I cant help but think there is bullshit in the tank. And yes, the plan is to go LSx. But If I...
  24. spanky55amg

    87 gas tank in an 84

    I think there is trash in my tank and I have to replace the sending unit anyways has it only reads about 3/8 of a tank when full. So I was thinking about replacing the tank with a 87 tank to prep for future fuel injection. Would an 84 sending unit work in an 87 tank? Or could I put an 87...
  25. spanky55amg

    q-jet electric choke

    I think I found the problem.......

Latest posts

Forum statistics

Threads
44,168
Posts
950,797
Members
36,284
Latest member
RogerioHR
Top