Search results

  1. Juan Cano

    RETRO-Mod: Jeep intermediate steering shaft

    I didn't see the allen screw but will check, thank you. I decided to buy the more expensive Borgeson too, a more experienced friend told me to not mess with a steering hack.
  2. Juan Cano

    RETRO-Mod: Jeep intermediate steering shaft

    I SOMEHOW screwed up this swap. I bought the part, both ends fit but I thought the column would stretch out more.... and it didn't!! It's short like 3/4". Sigh. I must've bought the rworng one. I already drilled a hole on one end so can't send back.
  3. Juan Cano

    Leaf Spring Install Advice - Won't line up, shackle angle

    Geez that would've been so much better!!! The axle kept moving back then I would push, then it came off the jack, LOL!!! Thanks!!
  4. Juan Cano

    Leaf Spring Install Advice - Won't line up, shackle angle

    Thank you for all the tips. Yes the axle had moved the driveshaft back (I had no idea that could happen). I pushed it forward, wrestled with the whole situation in the 90 degree sun for a couple hours, and now the spring is all back together fitting right. I have torqued all the bolts after...
  5. Juan Cano

    Leaf Spring Install Advice - Won't line up, shackle angle

    Thank you for that info, helps a lot. The shackle, I looked at photos before I removed, and it's closer to being vertical than slanted forward (like the one I installed). I will adjust it. I just installed the other shackle and made it more vertical. What a royal pain to install.
  6. Juan Cano

    Leaf Spring Install Advice - Won't line up, shackle angle

    Hello, and thanks in advance for all the sage advice. 1986 C10 2WD 8FT Bed I decided to remove and refresh the rear springs based on advice from the shop that did work to my front end. I got through all the insanity of removing, removing bushings, etc. Wire brushed the leafs and painted them...
  7. Juan Cano

    Hard accelerator pedal

    NP! It seems that perhaps that is just how the Edelbrock carbs are, stiff. I should just be happy that the truck runs and shifts well and stop looking for nit picky issues.
  8. Juan Cano

    Hard accelerator pedal

    Yeah, maybe is just the way the eddy carbs operate and I am just being a cry baby, lol!!! Thanks for the post.
  9. Juan Cano

    Hard accelerator pedal

    Update: I replaced the vacuum cap, not with tape but a proper cap. I removed the throttle cable from the linkage and the cable moves easily, so is not the cable housing. I will read more on the springs, although it is hard to move the linkage with the spring disconnected, so I don't think the...
  10. Juan Cano

    Hard accelerator pedal

    I wasn't being cynical, sorry if it came across that way. I replaced the vacuum cap!
  11. Juan Cano

    Hard accelerator pedal

    Update: Fixed the vacuum plug. Also unhooked the accelerator cable from the carb, and it moves freely. It's more like the lever as it pivots is hard. This lever seems to be connected to the accelerator pump? I may be overthinking this and should just be happy that the truck runs well; who cares...
  12. Juan Cano

    Hard accelerator pedal

    Wow, thank you so much for so many ideas to test. I will work on them this week. And yes, the pedal has always been hard. It's only hard at first, then it moves well. Now it sounds like dirty bedroom talk. And yes, probably comparing it to a 2021 Kia is not fair.
  13. Juan Cano

    Hard accelerator pedal

    Well that was worth the post!
  14. Juan Cano

    Hard accelerator pedal

    Hi; have noticed (and wife noticed too last weekend) that the accelerator pedal is hard to push. There is no soft start to the pedal, so sometimes if you are not being careful, you push it and truck lunges forward because you gave it too much gas. This has an Edelbrock Carb. I removed the...
  15. Juan Cano

    Lowering front springs and rear shackles

    Following; hope someone replies. Looking to lower the front end on my 1986 just a little bit.
  16. Juan Cano

    SOLD: 1986 C10 Interior Door Panels and plastic grill- In nice shape - $150

    I have a pair of blue door panels, in very good condition, for electric window truck. No major scratches or tears. Leather pattern on them. They come with the chrome door latch inserts, those are a little scratched. Also the rug part that go below. Those have been painted and are not as nice as...
  17. Juan Cano

    LMC Heavy Duty harness (quad headlight )

    I figured it out!! Thank you. I didn't change the bulbs. Someone said to just buy nicer quality headlights. But maybe next year. Don't drive at night that much.
  18. Juan Cano

    WANTED: Interior trim pieces 86 C10 Preferably Beige/Tan color and Door panels

    Yes please; not sure it will be cost effective to ship a liner from New Mexico to Rhode Island though. But interested anyway. My truck is not perfect so parts that are pretty good will work. Thank you.
  19. Juan Cano

    WANTED: Interior trim pieces 86 C10 Preferably Beige/Tan color and Door panels

    Looking for pretty much all the interior trim plastic pieces for a 1986 C10 Silverado in Beige/tan; the ones around the doors, the pillars, etc. Don't need the under the dash kick panels. Also looking for door panels for electric window in the same color, in decent shape, with no tears and not...
  20. Juan Cano

    LMC Heavy Duty harness (quad headlight )

    Hi; this is an old post but, working on doing this on my 1986 C10. So the 3-prong plug, you put that on the upper light connector that is on the wiring harness? Then the rest of the plugs just go to the light? Confused about this.
  21. Juan Cano

    Power Window Relay Conversion

    This is why I am looking into the upgraded harnesses for headlights and windows. My driver side window, which works sometimes, I noticed previous owner added power cables (probably because it stopped working) and it's hacked together with the headlight switch and goes straight into the battery...
  22. Juan Cano

    Power Window Relay Conversion

    In the forums and other people say that if you do this for the headlights for example, you get a much brighter headlight beam, and more consistent. On the windows, it says windows will go up and down faster. I am looking into this because the previous owner has done some bad hacking where one of...
  23. Juan Cano

    Power Window Relay Conversion

    Question with these relays; can I do the power window relay conversion AND also do the same for my headlights? It won't kill my battery?
  24. Juan Cano

    I broke my new truck

    @Ellie Niner It can be done!! With a lot of patience and hand cramps and scratches. I managed to get to the right blinker bulb through the hole where the stereo goes. Twisted out the bulb socket and swapped the LED with incandescent. Fixed it. Not recommended, very hard to do especially because...
  25. Juan Cano

    I broke my new truck

    @Ellie Niner I'll give that a try; I was wondering if I can take the bulb out from behind under the dash so I don't have to take the whole setup apart for one bulb.

Latest posts

Forum statistics

Threads
44,168
Posts
950,783
Members
36,283
Latest member
Cantrell299
Top