Search results

  1. 454-k10

    HELP! Keep it stock or go a little aftermarket

    I really appreciate all the responses.
  2. 454-k10

    HELP! Keep it stock or go a little aftermarket

    I think I'll keep it factory and just tighten it up. I love the fact that it's all original. I saw it and freaked out.
  3. 454-k10

    HELP! Keep it stock or go a little aftermarket

    Is the heat riser valve the one that doesn't have a hose on it? It looks like it is supposed to attach to the brown/tan port coming off the air cleaner but it's broken. I dont know if that's actually where it goes or not. It runs good. Really smooth. It likes to die at just off idle as you...
  4. 454-k10

    HELP! Keep it stock or go a little aftermarket

    I picked up this 1982 K20 and it runs pretty good. It's almost all original under the hood. Air pump, air injection on the manifolds. It starts and runs well, but I'm debating headers. I've never had one like this, so original. But it doesn't have much power. The original air cleaner is still on...
  5. 454-k10

    Frame identification

    Not sure where to post this, but my k20 has a stamp on the frame. I've never seen one stamped.
  6. 454-k10

    Dual battery setup questions

    My dual battery setup has parts inline on the positive side of my auxiliary battery. Does anyone know what they are? This is on the passenger side just off the isolator. There is also one about a foot away from the battery and accessories are attached to a post going that way. I'm thinking...
  7. 454-k10

    Wipers turn on after random components are shut off.

    $1,500. It's a 1982 k20 Silverado. Low miles and almost completely original. 4" lift. Truck is in amazing condition. It sat for a long time and needs a little work.
  8. 454-k10

    Wipers turn on after random components are shut off.

    Thank you!!! I'm gonna do what you said and see if I can fix it.
  9. 454-k10

    Wipers turn on after random components are shut off.

    It's this setup
  10. 454-k10

    Wipers turn on after random components are shut off.

    My wipers have the knob you twist. I've never seen one like this. It seems to be a LO speed.
  11. 454-k10

    Wipers turn on after random components are shut off.

    I just picked up another square. It's an 82 k20 Silverado. I turn off the ac or the lights and the wipers come on for one sweep then stop. Anyone have any thoughts why?
  12. 454-k10

    power window relay mod

    So is your relay kit plug and play? What all do I need to do to install it? Is the auto down an option for a stock power window setup? I lubed everything up and it's still slow. If your setup is plug and play I need one lol.
  13. 454-k10

    Dana 3/4 vs 1 ton?

    It will have one or the other style hub. In 71' I believe they were the big hub, but that was a long time ago. Until you put eyes on it this is all speculation. I've seen 10 bolts with big hubs. I bought a 72' d44 and it had little hubs. Get your hands on it and we'll identify it for you.
  14. 454-k10

    Dana 3/4 vs 1 ton?

    Actually the spindles are the same and you can get bearings at rockauto or lmc. The inner race that rides on the spindle is the same diameter. I have a set of each kind of hub and have switched back and forth without issue. Swapping the spindle won't change anything. If you have a set of newer...
  15. 454-k10

    Dana 3/4 vs 1 ton?

    The later hub bearings are the same 1/2 to 3/4 ton d44 to 10 bolt.
  16. 454-k10

    Dana 3/4 vs 1 ton?

    If they have external lock out hubs the inner bearing is bigger. The lock outs have 6 bolts mounting them to the hub. The bolts like to back out and break.
  17. 454-k10

    Dana 3/4 vs 1 ton?

    Yea, I thought that until I flipped mine.
  18. 454-k10

    Dana 3/4 vs 1 ton?

    Clutches
  19. 454-k10

    Dana 3/4 vs 1 ton?

    It's a lsd or posi yes. Open until one side starts to slip then the other side starts to engage. I snapped shafts all the damn time. I was about to upgrade to a 60 when I flipped it. It had a bad ass 454 too and I never was shy of wide open and we don't have mud. All Rocky mountains lol. Not as...
  20. 454-k10

    Long bed to short bed conversion

    If I was closer that swb would be on my trailer. :(
  21. 454-k10

    Dana 3/4 vs 1 ton?

    I had a Trac lok in d44 front and would snap shafts all the time .
  22. 454-k10

    Gear/Tire Size/Motor/Tranny Combo

    My 1980 swb had a mildly built 454/th350/np205/35s/4.10s. I could cruise all day at 80-85 mph, 3,000-3,300 rpms. It was locked front and rear and in 4 low it would smoke all 4 tires down the street. I had rear disc so I couldn't brake and light em up. Either way I wanted lower gears and taller...
  23. 454-k10

    Dana 3/4 vs 1 ton?

    30 spline at the diff like a d44? So can you use these shafts on a d44? 10 bolts were 28 or 29 I can't remember, but the d44 inners were 30. All the outers were 19. The inner spline count won't effect swapping 6 to 8 lug though. That doesn't matter.
  24. 454-k10

    Dana 3/4 vs 1 ton?

    I bashed my last 14ff and it took everything I gave it, laughed and called me a pussy lol. 500 lb axle and everything is heavy duty. I got my first sf axle and interested to see how it holds up. This truck will only see the street so I'm leaving the axle, but if I was 4 wheeling it I would swap...
  25. 454-k10

    Dana 3/4 vs 1 ton?

    Unless you're seriously 4 wheeling you don't need a d60 up front. A d44/10 bolt is sufficient. To make a 6 lug d44 8 lug you have to swap the outers. Caliper holder/backing plate, caliper, hub and rotor. Extremely easy. The lock outs are the same 6 and 8 lug.

Latest posts

Forum statistics

Threads
44,168
Posts
950,776
Members
36,283
Latest member
Cantrell299
Top