Search results

  1. usar17

    odd steering wheel movement

    Ahhhh. I just switched the front springs to tuff country ez-rides last winter Sent from my SM-G975U using Tapatalk
  2. usar17

    odd steering wheel movement

    So as I'm coasting straight down the road my steering wheel alignment is good and the vehicle does not pull after right. When I apply the brakes the steering wheel turns about an eighth counterclockwise. But the vehicle does not pull to the left or the right at all. if I give it heavy...
  3. usar17

    Caliper upgrade?

    Disregard. 3rd bleed and now everything is perfect :) Sent from my SM-G975U using Tapatalk
  4. usar17

    Caliper upgrade?

    So all switched over. Bled the brakes and the pedal was nice and firm. Started the truck and now it goes to the floor easily and the brakes suck... Bled it again while the trucks running and still shitty :/ what did I screw up?? Sent from my SM-G975U using Tapatalk
  5. usar17

    Caliper upgrade?

    I know the valve you're referring to, I'm debating installing one but currently the manual valve is a huge help. I'm about to install the larger jb7s upfront. I'm just asking if I should throw jb7 in the rear or keep them Jb6. I don't haul a ton. And the main thing I tow is 6,000 of pontoon...
  6. usar17

    Caliper upgrade?

    would there be any reason why I should not upgrade the rear brakes on my 14 bolt full floater with disc brake conversion to the jb7 style calipers? Sent from my SM-G975U using Tapatalk
  7. usar17

    Caliper upgrade?

    So I swapped in Hydroboost, converted dear 14bolt FF to disc with JB6 calipers, added a manual brake fluid proportioning valve in for the rear line, front axle is 8 lug gm 10 bolt with JB6 calipers. Can I just swap out the front Calipers and rubber hoses to JB7 for better braking? Or do the...
  8. usar17

    Rear brake issue after hydroboost

    Adding the manual proportion valve was gold! Fixed a lot of issues as I dialed it in. Thank you!!! Swapping the front brake calipers to the 3/4 tons, is it as simple as just the caliper and the hose? Since I believe the banjo is different Sent from my SM-G975U using Tapatalk
  9. usar17

    Rear brake issue after hydroboost

    Thanks! I figured I was just getting way too much pressure to the rear Sent from my SM-G975U using Tapatalk
  10. usar17

    Rear brake issue after hydroboost

    I only put in the hydroboost/master cylinder. The proportioner was an aftermarket for GM trucks Sent from my SM-G975U using Tapatalk
  11. usar17

    Rear brake issue after hydroboost

    I may need to add that. Thx Sent from my SM-G975U using Tapatalk
  12. usar17

    Rear brake issue after hydroboost

    4-5 years ago I swapped in the hydroboost unit from a newer Chevy commercial van. I also swapped the brake proportioner out to an aftermarket disc/disc model. I have a 14bolt rear with disc brake conversation that has the 1/2 ton front discs. Since doing all this I have had constant issues...
  13. usar17

    Side window defrost add?

    Poked around the salvage yard. Most Chevy side vents clip on to the dash and have a premolded air channel. Luckily i found these on a 2000-something Altima. This should work perfect clip into our dash and use a pre-heater hose as duct work. Now just need to brainstorm a means of tying into the...
  14. usar17

    Down the road planning vortec/4l80 swap

    I know LS system needs higher fuel pressure. What about the early vortec?
  15. usar17

    Down the road planning vortec/4l80 swap

    Or at this point will it be the same effort to do a 5.3L LS swap with a 4L80E? I feel the early vortec would be a little simpler. Lol also debating switching to manual and grabbing a nv4500. I'm currently so indecisive on what to do next. Looking to make my truck a little more DD friendly...
  16. usar17

    Down the road planning vortec/4l80 swap

    So...lol I currently have the wiring and drivetrain of a stock 1994 TBI 350/4L60e with a 1991 burb NP241C for driver drop and electric speed sensor. Looking to improve again. If I bought a late 90s k2500 for parts: wiring, motor, 4L80e...what else do I need? Reusing my 241. -I'd assume a new...
  17. usar17

    Side window defrost add?

    Like this right here is perfect and what I'd love to find. This is in a landcruiser. Sent from my SM-G950U using Tapatalk
  18. usar17

    Side window defrost add?

    Can pop them out of a lot of cars too. The more important thing tho would be any available duct work or funnel on the underside of the the dash. Haha I've gone as far as thinking of using shop-vac attachments to run hose and 90° to the dash. Sent from my SM-G950U using Tapatalk
  19. usar17

    Side window defrost add?

    Something like that is exactly what I'm looking to do. I just haven't seen any newer Chevy trucks at my pullit yard yet. Haha newest trucks there are all Dodge [emoji23] Sent from my SM-G950U using Tapatalk
  20. usar17

    Side window defrost add?

    No I have been dealing with a ton of other stuff lately. Sent from my SM-G950U using Tapatalk
  21. usar17

    Side window defrost add?

    Bumps. Defrost worked nice the other day in the snow. Rain tho has always been the worse for sides fogging. Sent from my SM-G950U using Tapatalk
  22. usar17

    NP241c pass drop 4lo signal

    So I have a 1994 4L60e transmission and ecm. Been running it for awhile now with a np241c from a suburban for pass drop. It only has the 2 prong switch for the 4wd indicator light. What have people done for the 4lo signal to the ecm to adjust for the gearing change? Easiest is obviously a toggle...
  23. usar17

    Door speaker wiring

    Did you say you built that lower portion cover? Just cut some carpet? Sent from my SM-G950U using Tapatalk
  24. usar17

    Side window defrost add?

    I also think my manual lower side vents maybe leaking. I can feel cold air coming from them when closed. Sent from my SM-G950U using Tapatalk
  25. usar17

    Factory GM Guages ADD tach?

    Exactly what I need to do! Couple questions. Did you have to cut the hole for the tach connectors? What kind of connections were on the fuel gauge? Did you have to modify the bottom left hole any for the fuel gauge to fit since that's normal a blank with just battery indicator? Did you do...

Latest posts

Forum statistics

Threads
44,168
Posts
950,779
Members
36,283
Latest member
Cantrell299
Top