Search results

  1. Rhett Croley

    Amp Power Steps on a K5 solved.

    Rory- Sorry, just saw this. I stayed with the 208 and got the in-line signal generator/tac input (don't remember what it's actually called) that ties in line with the speedo cable and brought the speed input in that way. It's the terminator X with trans control harness. 4L80, 6.0 LQ9
  2. Rhett Croley

    Amp Power Steps on a K5 solved.

    This idea has been kicking around in the back of my head ever since these retractable steps came out but there's nothing on it, just a bunch of blogs that go nowhere. What set it in motion was my wife buying the $1400 steps for Christmas. If I couldn't make them invisible when retracted then...
  3. Rhett Croley

    Opinions on an Engine Swap for 81 C10

    I put a Blueprint 350 sbc in my son's '87 k10 a few years back. It came with new cast block, carb, intake and flywheel. Basically it was a vortec motor with a cam with a dyno sheet showing 375chp for $3800 delivered. It ran great but dropped a cylinder at @3k miles. Blueprint took it back and...
  4. Rhett Croley

    Amp Power Steps on a K5 solved.

    Forgive me. Each side/assembly was @50lbs. Good eye. '86 K10 short bed in the background in the process of receiving an LT swap from an '05 Escalade 6.0 LQ9 and 4L80 trans, Texas Speed stage 3 cam kit, Holley Terminator X w transmission control and 92mm throttlebody. Estimating 410-420chp
  5. Rhett Croley

    Amp Power Steps on a K5 solved.

    I see you like to post stupid comments based on your posts. Crying out for attention, lonely, wtf
  6. Rhett Croley

    Amp Power Steps on a K5 solved.

    ...
  7. Rhett Croley

    Amp Power Steps on a K5 solved.

    More..
  8. Rhett Croley

    Amp Power Steps on a K5 solved.

    More..
  9. Rhett Croley

    Amp Power Steps on a K5 solved.

    First let me explain: My wife has always been down to ride, for 26 years, but we're both turning 50 this year and starting to look a little silly jumping up into this old Blazer w 7" of lift on 36" tires. She's been on me for years about a step but I like my clean look as-is. I told her...
  10. Rhett Croley

    DISC BRAKE COVERSION

    I have them on a 14ff and two 14sfs. They look great but not worth the trouble. I have lock-up issues on the rear after changing to hydro boost, even with the prop valve turned all the way down on the 14ff. The 14sf has el dorado calipers and they were a mofo to bleed and set up and I beleive...
  11. Rhett Croley

    Headers? worth the effort & cost?

    I run the Sanderson manifolds on my 496ci. A couple reasons why. First, I've been fighting headers for almost 30 years in several different k10 and K5s I've owned. I've had good results with the Stage 8 locking header bolts but they will still leak eventually. Still the stage 8's are the...
  12. Rhett Croley

    Rebuilt Cardone Crap

    I recently was forced to go hydroboost to get the clearance needed to get BBC head covers off because the stock vacuum booster was too close. I knew it's be a problem one day and the wife was looking to buy me something for my birthday so I got the parts. Wish I'd never done it. It stops great...
  13. Rhett Croley

    LMC should be proud

    I buy what I have to from LMC, hardware and stuff like that, otherwise it's from USA1. I bought a "premium" bumper from LMC last year and the first had bad places in the metal that made it look dented so I tried to send it back but they said keep it. The second one was defective too, gave them...
  14. Rhett Croley

    700R4 Rebuild cost

    I've had two 700r4's built in the last 2 years. One for a 400hp small block and one for a 505hp 496 BBC. Both were built with heavy-duty clutches, both have corvette servos, both were built to handle the motor they mated up to. I removed, delivered, picked up and installed each one myself...
  15. Rhett Croley

    Stimulus Check, Header Nightmare and Regrets

    I've regretted every time I put headers on my trucks, come to think of it. I put just put Sanderson high flow manifolds on my K5's 496 big-block project and I frickin love em(@$600). I baked them to 400 degrees, took them straight out of the oven, hung them up and put a can of high heat black...
  16. Rhett Croley

    Transmission Options

    I've got a 700r4 that my transmission guy built for me to handle a 500hp big block stroker. He told me he could do it and that 700r4's were capable if built correctly and he was right. It was built with heavy duty clutches and a corvette servo. The motor is just over 500fpt. He also built the...
  17. Rhett Croley

    K5 Removable Top

    I used to walk mine on and off from inside/underneath. They're not heavy if you get inside and squat down like someone else described. I'd put the tailgate down and back up to a hill at the house. Now I have grown sons so no more of that nonsense. But beware, if the top and rubber is original...
  18. Rhett Croley

    ATF coming out of vent tube

    Is it coming out of the transmission vent or the t-case vent. If it's the t-case then transfer case-transmission seal is blown and pumping transmission fluid back into the transfer case and it's running out of the vent tube?
  19. Rhett Croley

    Steering gear box replacement or rebuild?

    If you have the budget I'd look into the cross-over steering setup. I first put it on my K5 before the Dana 60 swap and have been so spoiled by how it steered and drove that I put it on each of my sons trucks, K10s. They all drive like big Cadillacs. One of my best upgrades to the truck, imho...
  20. Rhett Croley

    Aftermarket EFI Recommendations

    I could not disagree more with your review of the Holley Sniper Efi system. The Edelbrock FloPro 4 looks like a great setup with direct port injection and I see the benefits of that setup but I have installed three Sniper Efi systems and I even daily drive one. My 1987 silverado v10 is a SBC 350...

Latest posts

Forum statistics

Threads
44,168
Posts
950,780
Members
36,283
Latest member
Cantrell299
Top