Search results

  1. chevyninja350

    CS130 Alt Wiring on 85 c10

    So I just went out to the truck and tested the Brown wire. With the key on the wire gets 12 volts. Key off it gets nothing. The voltage gauge works with the brown wire unplugged as well as plugged in. On the old 2 pin alternators that came on the truck (GM SI alternators. SI10,SI12 etc.) The...
  2. chevyninja350

    CS130 Alt Wiring on 85 c10

    Thanks for your replies. Which wire do I run my Gauge off of. Is it the ignition wire? And do I need a resistor in line on that?
  3. chevyninja350

    Diagnosing a non-honking horn

    First find a pinout for the relay see if the 12 volt pin is getting 12 volts. (relay is on the right side of the column next to the big buzzer box). Then I would see if the horn wire (Black and Green wire) is getting voltage also check horn Ground. If it is getting voltage press the horn button...
  4. chevyninja350

    CS130 Alt Wiring on 85 c10

    I have a 1985 Chevy c10 350 with Vortec heads and accessories. I am currently running a CS130 Alternator not CS130D. I want to know which of the 4 wires on the CS130 Alternator (PLFS) to use with the stock voltmeter gauge (Brown wire from bulkhead). I need to know which wires need ignition or...
  5. chevyninja350

    2/4 drop pics

    what size tires are those? whats your tire height?
  6. chevyninja350

    Wide rear wheels.

    Thanks for all the replies. I think I found the wheels I'd like to get, but I still have to figure out backspacing. I'll post what I end up getting. Here is the wheels I'm looking at: https://www.cragarwheel.com/shop/15x12-5x5-series-61c-ss/
  7. chevyninja350

    Wide rear wheels.

    I am new to picking out wheels and tires, I am hoping to get some pointers. I have a 1985 Chevy C10 fleetside long bed, I am looking to run wide rear wheels in the rear. I want to run the widest possible wheel without tubing the bed, I want a 15-17inch Rim with a lug spacing of 5x5in (5x127). I...
  8. chevyninja350

    carburetor size on a 350

    Pretty good reply LOL thanks
  9. chevyninja350

    carburetor size on a 350

    Only a few people have partially answered my question. So here is a revision of my original post. I want to use an Edelbrock/Carter AFB carburetor. For one reason or another I'm not interested in a Quadrajet, Holley or any other carburetor. I just want to keep the Edelbrock 4 barrel in mind for...
  10. chevyninja350

    carburetor size on a 350

    Thanks for all the help.
  11. chevyninja350

    carburetor size on a 350

    What cfm Quadrajet did you have?
  12. chevyninja350

    carburetor size on a 350

    I need help. I know stock Chevy 350s are happy with 650 CFM carburetors. That being said I have a 750 Edelbrock 1411 on my non bored over 350 9.93:1 compression that is far from stock. It has an Edelbrock dual-plane intake, A lopey 510/520 lift cam (2200-5800 RPM) and aftermarket vortec heads...

Latest posts

Forum statistics

Threads
44,168
Posts
950,770
Members
36,283
Latest member
Cantrell299
Top