Search results

  1. C

    12 bolt yoke to 10 bolt yoke?

    I've been trying to figure out if it's worth trying to find a seal that will work for a 10 bolt yoke and a 12 bolt housing or if I should just swap the 12 bolt out for the 10 bolt. Really trying to keep the 10 bolt yoke so I can retain the same driveshaft.
  2. C

    Need help rewiring radio

    Ive recently took the radio out to see if i could fix it after someone had cut and spliced a bunch of wires too it. I was wondering if someone could help me identify which wire goes to what on the pigtail or atleast point me to a diagram of the connector
  3. C

    Tick at idle

    Man i was livid when i found out what it was
  4. C

    Tick at idle

    Thanks for the help from everyone. I figured out that it was not a knock or a tick but a butterfly valve on the exhaust manifold that was flapping
  5. C

    Tick at idle

    You would laugh at what i eventually found out when i pulled the motor. It was a butterfly valve on the exhaust manifold that was just a flappin
  6. C

    262 v6 to 350 v8 oil cooler?

    I was wondering if i could replace the oil cooler with a normal oil filter on the 350 when i swap it into my c10?
  7. C

    Temp gauge connection from drivers side head

    Kinda out of nowhere but i love how im not the only one too lazy to unbolt the valve covers for the second time just to take out a lil wire lmaoo
  8. C

    Brake pedal goes to floor

    It is pretty dark almost looks like oil.
  9. C

    Brake pedal goes to floor

    The master holds fluid and is always full, They have gotten worse with time it seems though. The brake booster line had duct tape on it but it didn't look like it was doing much so i removed it, after that they seemed worse lmao, could a leaking brake booster cause those same symptoms by chance?
  10. C

    Wipers barley working

    Ok I wasn't rushing anybody I can wait.
  11. C

    Brake pedal goes to floor

    The brakes only seem to work towards the end of the travel, in order to stop i usually have to fully depress the pedal to the floor. The pedal is also really soft with little resistance with the truck running. i'm not quite the smartest when it comes to brakes n the only thing i can think of...
  12. C

    Wipers barley working

    lmk what thread you put em in i would love to see the process
  13. C

    Wipers barley working

    Thanks for all the tips and help. I'm currently regrounding as much as i can and then ill see if that fixes it, they do seem to work going down the road when its raining oddly enough.
  14. C

    Wipers barley working

    My wipers will not work at all on low and only on high. but when they are working they make 1 or 2 passes then will freeze and stop in the middle of the windscreen. I can either assist them with my hand for them to continue moving to the off position or sometimes switching them on and off...
  15. C

    High beams on 86 C10

    I figured out how to turn on the high beams but i gotta quick question. What would the one stalk be that i have circled in yellow be used for and did all models have it? Just curious cause my truck does not have one.
  16. C

    High beams on 86 C10

    Thanks for the help man! i felt like i was gonna break it
  17. C

    High beams on 86 C10

    I noticed i have a high beam indicator above my spedometer but i have no idea how to turn in my high beams. Could someone help me here?
  18. C

    Tick at idle

    I was wondering that about that as well. what would cause that to happen?
  19. C

    Tick at idle

    I just recently bought the truck as kind of a beater work truck for use around the house, or just roughing around. I would assume the lifters are stock and the previous owners also used it as a farm truck so i would guess they used bottom line oil, i would really like to know if it is a flat...
  20. C

    Tick at idle

    Hopefully that is the issue, the exhaust has been hanging pretty low for a bit and prolly before i owned so maybe that had loosen some bolts? imma have a look at it when i get home.
  21. C

    Tick at idle

    The tick is mostly there at idle, increases with rpm up to about 1200 rpm then goes away. But what i cant seem to understand is when im cruising around 40 - 50 don't hear the tick at all, and i come to a stop the tick is gone for almost a minute or two but as it comes back it comes back as a...
  22. C

    Does a 86 C10 4.3 V6 have hydraulic lifters?

    I understand that.
  23. C

    Does a 86 C10 4.3 V6 have hydraulic lifters?

    Thanks for yall bit of knowledge. Should i add a zinc additive just incase?
  24. C

    Does a 86 C10 4.3 V6 have hydraulic lifters?

    I was just wondering if my truck has hydraulic lifters? just a question of mine.
  25. C

    Weird knock under load

    Like my exhaust could move up some. My cat is laying on something ill send a pic

Latest posts

Forum statistics

Threads
44,168
Posts
950,797
Members
36,284
Latest member
RogerioHR
Top