Search results

  1. WillSquared

    Replace A/C entirely

    Thanks for the info guys. I am torn. I’ve considered the Vintage Air but I could replace the stock setup 3 times over for the price of the vintage air kit. I’ll just have to weigh my options. Sent from my iPhone using Tapatalk
  2. WillSquared

    Replace A/C entirely

    Mine is the pancake style compressor. What would have to be changed to go to the Sanden? Sent from my iPhone using Tapatalk
  3. WillSquared

    Replace A/C entirely

    So I have had nothing but trouble out of my AC system since I bought my truck a few years ago. I’ve been through a couple compressors, and now the heater core is leaking. I’d like to just take all the old out and replace it all with new parts. Could someone who knows more than me list out...
  4. WillSquared

    looking for advice on lower my truck

    I’m wondering the same as the OP. I already have the 5” flip kit for the rear. I was going to do spindles until reading of tons of fitment issues with 15” wheels. I’m planning to run 15x8s with 4” backspacing. I can’t find any 2” spindles, only 2.5-3”. Makes me nervous and wonder if I need...
  5. WillSquared

    Going from auto to manual?

    It's more a thematic direction of the build. Going kind of the shop truck, slightly above rat rod kind of thing. I already need new glass and interior panels. Honestly I need a new wiring harness for the whole truck. I have quite a few electrical gremlins thanks to the previous owner. Sent...
  6. WillSquared

    Going from auto to manual?

    I'm deciding the direction I was to take my 86 and just wondered how difficult/possible and what all would be involved to switch from the power windows etc to manual roll ups? Sent from my iPhone using Tapatalk
  7. WillSquared

    Dropped and new wheels/rubber

    Looks very nice! Sent from my iPhone using Tapatalk
  8. WillSquared

    What have you done to your square lately??

    Put my new wheels on... Sent from my iPhone using Tapatalk
  9. WillSquared

    Aftermarket steering wheels

    I've been pleased with mine also. It is spendy but it seems to be very nice quality. I will say I was a tad disappointed the spokes weren't a little closer match to the factory finish of the trim. But it's not a big deal and don't have to worry about glare. Not to thread hijack but did you...
  10. WillSquared

    Already ordered, now questioning fitment

    A slow Thursday night apparently. Sent from my iPhone using Tapatalk
  11. WillSquared

    Already ordered, now questioning fitment

    Shrugs...that's the name of the rim. Sent from my iPhone using Tapatalk
  12. WillSquared

    Already ordered, now questioning fitment

    Got a little antsy on the 3/5 plans with 275s all around so changed to an 18x8 with 255/55s. Hopefully that'll work fine for the 3/5. Sent from my iPhone using Tapatalk
  13. WillSquared

    Already ordered, now questioning fitment

    So I may have jumped the gun a tad but I already ordered a set of 20x8.5 MB Old School wheels and 275/40R20 tires all around. The wheels have roughly 5" backspacing. The truck is stock height for now but I plan to do a 3/5, spindle/flip eventually. Is this going to fit ok or did I just screw...
  14. WillSquared

    Swap in newer ring/pinion?

    So I currently have the original rear end on my 86 C10, an open 3.08 (which is whining increasingly louder). I was wondering if say I happened upon a ring/pinion/lsd setup out of a much newer truck/SUV at a salvage yard, could I just swap them over? I'm seeing center chunks out of 02s and...
  15. WillSquared

    Dash emblem question

    Awesome, thanks! Sent from my iPhone using Tapatalk
  16. WillSquared

    Dash emblem question

    So, my truck has the Silverado option package on it. As I redo it and such I'm wanting to change from the brushed aluminum to the textured black with silver accents that was stock on custom deluxes and scottsdales I believe. My question is, will the little Silverado emblem fit on one of the...
  17. WillSquared

    Any difference in stepside beds through the years?

    So Im thinking pretty seriously about trying to find a stepside bed for my truck to swap over from fleetside. I just wondered if there are any differences through the years that I should be aware of on the stepside bed designs etc? My truck is an 86 so Id like to find a "matching" bed for it...
  18. WillSquared

    Grill moldings?

    I contacted The Truck Shop to confirm and have never gotten a reply. Looked at LMC and Brothers and dont see them offered. LMC used to have them but not anymore according to their latest catalogs.
  19. WillSquared

    Grill moldings?

    Well that stinks. The ones on my factory grille are pretty dinged, pitted and faded. Tried to polish them up yesterday and didnt make much progress. I guess Ill look around and see if i can find any in better shape than mine.
  20. WillSquared

    Grill moldings?

    So Im on the hunt for some of the center grill moldings for 85-87 trucks. I am updating the grill, have the grill itself, new parking lenses, and so forth but I cant find the cross moldings that are painted body color with silver trim and run under the bowtie anywhere. Does anybody know where...
  21. WillSquared

    Dakota Digital switch/button placement?

    Thanks, it is a tilt column. Part number R30531A. If you buy it and figure the horn out let me know. I can't figure out how to make the horn button functional. Sent from my iPhone using Tapatalk
  22. WillSquared

    Dakota Digital switch/button placement?

    I got the steering wheel from classic industries. I wanted it for a while but they were always out of stock. They are pricey though. Or I thought they were but of course I still bought it. :/ Sent from my iPad using Tapatalk
  23. WillSquared

    Dakota Digital switch/button placement?

    So the dakota digital guy is saying it sounds like my DRAC has been eliminated? WTH is a DRAC module? From what Ive searched I cant figure out if a nonfuel injected truck would even have one. I know i have the VSS but never heard of DRAC before. Any help or ideas?
  24. WillSquared

    What have you done to your square lately??

    Finally finished (mostly) my Dakota Digital gauge install. Now if only the rest of my truck was as nice as the gauges! Sent from my iPhone using Tapatalk
  25. WillSquared

    2wd to 4wd?

    I am in Arkansas. I guess it's a fleeting wish. I will just stick to my plans and keep it 2wd. Maybe someday I'll happen across a 4wd I can nab for a decent price. Sent from my iPhone using Tapatalk

Latest posts

Forum statistics

Threads
44,168
Posts
950,783
Members
36,283
Latest member
Cantrell299
Top