Search results

  1. T

    Roll bar for sale?

    How much to ship to Missouri? Condition?
  2. T

    Passenger side turn signal dim compared to driver side

    So I changed everything exterior back to incandescent and thought I solved all the worlds problems. Everything lit up and functioned As expected. But upon closer inspection, I regret putting it all back together because my RF turn signal under the headlamp is half the brightness of the driver...
  3. T

    C10 lifted 4.5” max tire size

    See attached photo, I know lifting a C10 isn’t common but I was able to order 4.5” direct replacement lift spindles so they make em for someone……Anyways, I put 32x11.5x15’s on it and I don’t hate it, but still a lot of free space in the wheel well so left with a blah outcome to some degree...
  4. T

    Stumped, fender marker/turn light issue

    Well, I can’t explain it but changed the front to incandescents but tried the LED flasher with incandescents and boom. Everything works! Perhaps the leds in the turn indicators on the dash are requiring the use of the led flasher even though I’m back to incandescents outside of the cab. Thanks...
  5. T

    Stumped, fender marker/turn light issue

    Yes. Original flasher and incandescents. Turn signal indicators on dash and out front on bright constant with no blink and fender lights nothing.
  6. T

    Stumped, fender marker/turn light issue

    Turbo4wheel, any thoughts now that I changed bulbs back to incandescent? Went from dim faint light with LED’s, popped em out and incandescent don’t light at all.
  7. T

    Stumped, fender marker/turn light issue

    Also, I understood the lesson on transistors, but I don’t think my LED bulbs have them as they are polarity specific not universal polarity.
  8. T

    Stumped, fender marker/turn light issue

    Ok so I put the 194 incandescents back into fender lights and zero light output at all. Front turn signals go bright when I pop it in and to dim when I remove them again. So faint light with Led and none with incandescent. Also, turn signal indicators in dash are solid on non blinking. Do I need...
  9. T

    Stumped, fender marker/turn light issue

    I understand all of this and am willing to concede that LED’s are the culprit. I just can’t figure out how the bulbs still test good at battery and they were working. Here is the photo with them working right after I put them in (and functioned just fine) and somehow now they burn dim. The only...
  10. T

    Stumped, fender marker/turn light issue

    Grounds are good as ground is shared with front signal and it’s operating fine. So would changing to LEDs in the dash cluster indicator lamps in front of steering wheel, have affected circuit resistance? I’m thinking I should put an incandescent back in those to see if anything changes at the...
  11. T

    Stumped, fender marker/turn light issue

    Also should add that truck has LED flashers installed and I changed the turn signal indicators on the dash to LED peanut bulbs as well. Is this part of my issue?
  12. T

    Stumped, fender marker/turn light issue

    Changed all bulbs on entire vehicle to LED. Everything worked perfect. All of a sudden, a month later the side marker/turn bulbs are burning faint rather than bright. Checked bulbs in another unrelated socket and they work fine. Thought it could be a ground issue but the front marker/turn bulb...
View older results

Latest posts

Forum statistics

Threads
44,167
Posts
950,745
Members
36,282
Latest member
Doug Hampton
Top