Search results

  1. S

    Broken hearted kid and fuel system

    hi had same troble with an 84 c20 i purchsed. went through whot you going through so i started at the carb with bottle all good .tghen same bottle other side of pump. all good end of metall fuel pipe wear selector valve was joind bottle all good.so completly removed valve put fule in tank all...
  2. S

    84 c20 gauge pin out

    thanks all ive dun it
  3. S

    84 c20 gauge pin out

    RAIDER L that would be great .ihave wiring diagrams that i purchased from classic parts .from them i can follow all the wires from sender to plug .the problem is from thear to the gage its self.the new loom i have dus not have the plug. also i have nothing to plug it into the plastic surround...
  4. S

    84 c20 gauge pin out

    trying to wire the gages into a difrent surounding that has no printed circit .i do not have the original circuit mounting etc just a bunch of gages with pins .whot do thay do .i do not know ! a good photo of the back of a cluster to follow to the multiplug would help
  5. S

    84 c20 gauge pin out

    thanks for yore replys but that not whot i ment .i need to know whot the pins on the gages are for .power/ground /sender etc etc
  6. S

    84 c20 gauge pin out

    HI can anyone help me .can you tell me the pin out for the gages .i have lge fule temp oil pressure and volts .thanks
  7. S

    head spec trouble

    HI ALL after reading post after post ive compleatly lost the plot. ok so i have a 84 c20 350 which is being rebuilt .so in the forums i have read that the comp cams 12-235-2 is the cam to go for. so i have one sitting in front of me. question are the 882 cylinder heads going to be able to handel...
  8. S

    Receiver Hitch

    lmc do a braket to fit spare in the bed
  9. S

    V belt to serpentine belt

    hi just fited a 88 firebird 305 tbi engine complet only thing i found is the truck power stearing pump would not fit as the tin pressing was clocked difrently so i just used the fbody pump from the engine.now yoy guys will know the answer to this the stearing is so light its great compeard to...
  10. S

    BC’s boat/dumpster fire thread

    i have had boats in my life from the start .thear will be days when you love it and days when you hate it .as long as the good out number the bad all good .it is going to swallow money at an alarming rate .but hay whot forum are we on isent throwing money at old bukets trying to reach the jewel...
  11. S

    tbi chip

    thank you bucket ,im going to run with the pontiac cam to be safe .when i find out if the 350 block is any good i wil look into runing the 350 with tbi but that wont be any time soon thanks again .
  12. S

    tbi chip

    thanks im going to fit the complete 305 pan to cleaner with the tbi ecu loom the whole shooting match and see how it goes .after sum reserch the original engine which is toast has a computer compatable cam which is in very good almost new condition with all the lifters.the original engine is a...
  13. S

    tbi chip

    HI i have a complete 305 tbi set up engine,harnes ecu etc etc his is from an 88 firebird .if i wos to change the cam in this from the f body roller cam to the truck flat tapett cam will the chip need messing with ? the originalcam is from the 350 from the truck which is listed as a computer...
  14. S

    Vince's TBI woes, progressive revelations, and tbi mods.

    who ould you recomend to supply a moded chip?
  15. S

    master cyl leaking !

    yep all wheels turn free .filled as stated in shop manual as for lid and vent i shal have another look lid looks a bit second hand ! bail wire !
  16. S

    No start, no crank, no noise

    check fuse bord power in/out and bulk head plug.my c20 was fine pulled on drive all good went to start dead wiring in my truck is DEATH ! new loom required :sad72:
  17. S

    master cyl leaking !

    HI 1984 c20 around 6 months ago all the brakes wer replaced discs drums cylinders pipes calipers etc etc all fine fantastic brakes .till all the sudden the master starts leaking around the lid .ive cheked it is the lid and not the pipes seals etc but its the lid to the point its driping all...
  18. S

    best way to improve fuel economy

    Hi all i have a 84 c20 with a recon th400 a 305 with a mild roller cam a quck fuel 600 slayer duel exhasts and im geting 8 im almost sure have 4.10 in the rear im looking for a way to get this in double figures sumhow ! love the old girl but not to fond of 8 mpg !
  19. S

    which head to use.

    WOW thats great i like that kit wonder if its avalable hear in the uk
  20. S

    which head to use.

    thanks thats interesting .i now belive if you want vortec heads pick up new ones or you are on a road to disapointment and cost this cost me an engine ok it can be rebuilt but at a cost .thanks to every one for yore help .steve
  21. S

    which head to use.

    well thank you or yore help .but the head craked around no 3 inlet rocker stud in 2 places and the std moved .peces of the head droped into the intake port and into the cylinder beat the piston up and put a 3/8 gouge down the bore .so for know the 350 is toast and the vortec head had been messed...
  22. S

    which head to use.

    the head has cracked acros the top from the rocker stud ill try post a pick .yepi know the others are bad compeard to the vortec but at the moment after this covid mess work has been on its ass so have to make do with whot i have .yes back to the old twelve bolt manifold .
  23. S

    which head to use.

    HI all sum advice required im having to replace the heads on my 84 c20 i have a choice of three difrent casting # 882 /810 /or 187 itsa shame as im having to junk a pair of vortecs as thay are craked .that is whot i have so it hs to be one of the casting # thay are going on top of a 350 with...
  24. S

    engine id

    HI again on the rear drivers side it says gm 3970010 on pasenger side just behind distributor says 350 ?
  25. S

    engine id

    HI i have a 1984 c20 350 th400 combo .the engine is not in a happy state .so today i removed the engine ive been around chevrolet engines for a while now but i do not recognise any of the id markings on the engine .the front pad in front of the pasenger side head reads KO402T4U under this is...

Latest posts

Forum statistics

Threads
44,168
Posts
950,764
Members
36,283
Latest member
Cantrell299
Top