Search results

  1. Moose Drool

    Breather Cap Question

    Could it be this port?
  2. Moose Drool

    Breather Cap Question

    No PCV anywhere that I can see.
  3. Moose Drool

    Breather Cap Question

    The port with the hose attached? It leads to this?
  4. Moose Drool

    Breather Cap Question

    I have an '84 K1500 with a crate 350 that the PO put in. It has breather caps on both valve covers that need new ones. Do they both need a breather? There is no state emissions testing needed. I included pics for detail.
  5. Moose Drool

    Another Gearing Question.....

    I have an '84 K1500 with a 350 and Muncie SM465. Prior owner put in 4:10's and 33" tires. I recently put on 31's and going to swap out the lift kit and put it back to stock height. At 60 mph the rpm is 2400-2500. Should I regear to bring the rpm's down some? I also plan to tow a 5500# trailer...
  6. Moose Drool

    Shocks for stock height truck?

    I have an '84 GMC K1500 that I'm putting back to stock height. Any recommendations? It is a daily driver.
  7. Moose Drool

    Instrument Bezel Screws

    I found the Dorman #45583 1 1/4" trim screws online. Not cheap @ approx. $1 each
  8. Moose Drool

    Instrument Bezel Screws

    I would like to buy these locally. What sizes do I need to look for? Previous owner had mismatched several. Same with the door panels if anyone knows. Thanks!
  9. Moose Drool

    Heater Control Cables

    I'm putting in a heater only control. The a/c unit is up for sale.
  10. Moose Drool

    Heater Control Cables

    Thanks I would appreciate some pics. Mine came with an a/c control panel, without the cables hooked up. The truck doesn't even have a/c lol
  11. Moose Drool

    Heater Control Cables

    My '84 GMC K1500 didn't come with a heat only control unit. Does anyone have pictures that show which cables go where on the unit? Thanks in advance.
  12. Moose Drool

    Fix Slamming Doors - Striker Door Latch Repair

    What size Torx?
  13. Moose Drool

    Sound Proofing

    Oh crap those are nice.
  14. Moose Drool

    Sound Proofing

    Did you put inside the door or behind the door panels?
  15. Moose Drool

    Sound Proofing

    Thanks for all the suggestions everyone. When the carpet was installed Dynamat and padding was used. Inside of the doors will be next when the panels get back on. I was thinking about using Dynamat on the firewall when I get under and do the re-wiring and heater work. Most of the interior...
  16. Moose Drool

    Sound Proofing

    What have you all done to rid the interior of unwanted noise? I used sound insulation under the new carpet. But the rest of the cab is all metal. What else can be done?
  17. Moose Drool

    2" Lift and 33's

    I'm considering buying new OEM height 6 leaf replacements for the rear.
  18. Moose Drool

    2" Lift and 33's

    Right now I'm leaning to the Tuff Country 2" EZ Ride fronts and getting stock rear springs with an ORD shackle flip. Thoughts?
  19. Moose Drool

    2" Lift and 33's

    Obviously no RTI comps or rock crawling , lol. Just mountain off roading and towing a trailer. Would HD springs be a good alternative to help spring rate?
  20. Moose Drool

    2" Lift and 33's

    I currently have a 4" unknown susp. lift with 33×12.5/15 tires. I would like to get a 2-2 1/2" quality susp. lift. Will I have issues with the 33's on the 2" lift? Recommendations on the brand of lift?
  21. Moose Drool

    Dual Fuel Tank Lines

    Does anyone have access to a diagram showing how they are routed? This is on a 1984 Sierra K1500. The first photo shows the two forward connections. The second photo is the opposite end of the line on the right in the first photo. The third photo is where the left line connects in the first...
  22. Moose Drool

    Throttle Cable Length

    New owner here of an '84 GMC K10. It has an Edelbrock 1411 carb. The PO installed a much too long throttle cable that has a good size loop up against the firewall. Can anyone advise the correct cable length to get? Thanks in advance!
View older results

Latest posts

Forum statistics

Threads
44,167
Posts
950,728
Members
36,282
Latest member
Doug Hampton
Top