Search results

  1. Kevin Foust

    Rear axle seal questions.

    This is the type of seal I'm referring to. " Upgraded 14 bolt hub seals. If you have constantly leaking hub seals or a pitted/damaged seal surface, these hub seals are your answer. This is a two part seal: the inner "ring" slides over the seal surface on the spindle and seals it, no moving...
  2. Kevin Foust

    Rear axle seal questions.

    When I get to that point, I'll see how the 2 piece seal fits on the spindle. They are supposed to lock on the spindle and the hub side is pressed in which stays put as well. The seals are designed to move inside each other. From what I've read, this is what the factory has gone to on the newer...
  3. Kevin Foust

    Rear axle seal questions.

    I may try the 2 piece seal first on one side and see how that goes. Maybe the Yukon seals were just low quality. Truck has 33,000 miles since it was all put in. Started weeping just before 30,000. It may be a case of low quality stuff but finding good quality is pretty hard with name buyouts and...
  4. Kevin Foust

    Rear axle seal questions.

    Did some searching and really didn't see an answer to this so I figured I'd ask as I'm sure some have gone through this. Both hub seals are leaking and it's a 1978 K30 14 bolt full floater with a 10 1/2" ring gear. spindle hub DOES have some grooving. When I regeared it 10 years ago I moved the...
  5. Kevin Foust

    Precision Vent Window Program

    With as much access as you have to the top rivets to put new ones in, no reason to fight trying to get that in with it together. I'd lay money the factory riveted them after too. Once I did it that way I wondered whether the weatherstrip manufacturer avoided saying to do that in hopes of people...
  6. Kevin Foust

    TH-400 w/Carrier Bearing?

    We special ordered a single wheel K30 cab and chassis in 1978 and it had the 2 piece driveshaft. Had a 350 with a TH400 automatic trans. with standard long bed wheelbase. We had nothing but problems with the 2 piece as the shaft would lock on the splines of the carrier bearing and force it to...
  7. Kevin Foust

    New and picked another one up.

    New inner door panels came today and got the interior better. Had gotten a new rubber floor a while back.
  8. Kevin Foust

    New and picked another one up.

    Life has a way of slowing you down but got the k30 back together and just took it for a test run. No leaks, shifted fine and everything works so that is a win to me. 38.5" Boggers with a homemade 2 inch body lift and reworked the front fenders for more clearance. The will be a work truck and...
  9. Kevin Foust

    Precision Vent Window Program

    The way their video shows is the hard way. Here is what works WAY easier. This method can be done quicker without the fighting. Drill out the 2 rivets at the top of the frame that holds it together. They are out in the open and super easy to replace. Once that is done, push in the top section...
  10. Kevin Foust

    Has anyone done the $50 Rustoleum Paint Job on their Square???

    I just did this on my project truck and I'll relay what I found. I used the local farm store (Tractor Supply Company) paint and it was around $30.00/gal. Using the mini roller I used it does leave it pretty rough. If you want to cut and buff( wet sand and buff out), you need to do at LEAST 2...
  11. Kevin Foust

    Fender to tire clearance the same side to side?

    Another open cab with a conversion. Crazy how many different brand cabs people used to "get inside". LOL Don't blame them either!
  12. Kevin Foust

    Fender to tire clearance the same side to side?

    More the time involved as i did all the work. No powdercoat on it, it is all paint I sprayed. You guys may like the frame. Only one crossmember was stock, the rest were modified or strengthened. All unused holes were welded shut and smoothed. Inside of frame looks like the outside. Did it over a...
  13. Kevin Foust

    Fender to tire clearance the same side to side?

    Good idea. I'll give that a shot when I get back on it.
  14. Kevin Foust

    Fender to tire clearance the same side to side?

    Hadn't thought of a Spring sag but odd it would be on just one side. Something to look for. The Driver side fender is just closer to tire(meaning down more). There is a reason for as little lift as possible. I did make a 2 inch body lift and it is on. The truck will be a wood hauler. I'm making...
  15. Kevin Foust

    Fender to tire clearance the same side to side?

    Building a work truck and got the cab back on and threw the front end on just for grins. Wanted to see the tire clearance. Cab had basically everything replaced underneath. I'm going to run 38 1/2" Boggers and don't want any more lift. I'm cutting the fenders. My question is should the tire to...
  16. Kevin Foust

    Need a combination valve for 4 wheel disc brakes.

    As promised wanted to give a follow up for anyone else who ever does this. They are the same dimensionally and all hole/thread sizes are the same so it's a direct bolt in. You don't have to change any of your existing lines in the front. Looks like either of these 2 part numbers will work as...
  17. Kevin Foust

    Need a combination valve for 4 wheel disc brakes.

    Well, went to a couple parts stores and my one good counter guy came back. He found it but would have to order and it was $129.00 THEIR cost. Took 77 K20's suggestion and looked for the PV 72 and found a place with schematic of size and thread sizes. It is the same as mine so I ordered it...
  18. Kevin Foust

    Rear discs

    As far as I know any of the kits brackets work with either Non parking brake or parking brake Calipers. Just a matter of buying them. The parking brake are Cadillac calipers and pretty expensive so most do not want them. The bolt pattern is the same for either style.
  19. Kevin Foust

    Need a combination valve for 4 wheel disc brakes.

    I was told by a friend today that some newer Chevy 1 tons have 4 wheel discs from the factory? Just trying to get a year range as I know the counter guys will be helpless to know what to look for. My main thing is I want to verify they are the same fitting wise so if I buy mail order I can be...
  20. Kevin Foust

    Need a combination valve for 4 wheel disc brakes.

    I guess I'm not alone in not knowing. LOL All the good parts counter guys I know have retired.
  21. Kevin Foust

    Need a combination valve for 4 wheel disc brakes.

    I have a 1980 K30 that I'm building for a work truck. Switching to rear discs and wanted to know if anyone knows a part number or what year truck is a direct bolt in.(if possible) In other words, the lines will be in the same locations and bolt up to the frame crossmember the same. I did this...
  22. Kevin Foust

    What have you done to your square lately??

    Doing a little touch up on the floor.
  23. Kevin Foust

    Need some measurements from a cab off the frame.

    I need some measurements to verify my positions before welding. The truck I'm working on had nothing to go off of as things have been change. They replaced the outer rockers only. The inners were gone with just flat sheet tacked in to fill the space. Original front cab mounts were "replaced" but...
  24. Kevin Foust

    New floor and question.

    Finally got started on the cab today. First area to do is the cowl to firewall. rusted through. Doing a smaller section at a time to keep everything in place as I go. Got the weld settings better here. This is going to take a while. LOL
  25. Kevin Foust

    New floor and question.

    I measured it for you and it is 49 inches. That is more than needed but you'd be more than safe with that. You may just have to stand on a chair if you want to work on the underside of the cab when upside down. I would not bother with making it up and down adjustable. I haven't seen the need...

Latest posts

Forum statistics

Threads
44,167
Posts
950,728
Members
36,282
Latest member
Doug Hampton
Top