Search results

  1. plummrey

    Lights are all wonky

    The new led flashers didn’t help anything so I just replaced them with regular 552’s and took out led bulbs and put in regular bulbs, took out cluster for those bulbs and took out my headlight switch it was corroded and two terminals not so great, got a harness on the way
  2. plummrey

    Question about dash speaker hookup

    PO had wires like this to the dash speakers (I only have one on each end of the dash no middle ones), what is the black cylinder thing and is that positive or negative. Should I leave it or use the two original wires, I haven’t put in a radio yet but have an old one on the way
  3. plummrey

    Lights are all wonky

    Thank you!
  4. plummrey

    Lights are all wonky

    I didn’t see a ground on the passenger tail light , I will look again but would it just be one side?
  5. plummrey

    Lights are all wonky

    Here’s a pic underneath that look to be the originals,, and I completely forgot to check the ground behind the taillight and it’s all rusted in there and the prong thingy broke off, so will fix that and find somewhere else to ground it
  6. plummrey

    Lights are all wonky

    I can take a picture tomorrow but underneath is the bundle from each tail light joined by a plug and the a cut off wire probably for the license plate since the sockets are completely missing for those
  7. plummrey

    Hooking up the electric choke

    How do I hook it up, there’s a plug that wasn’t connected to anything, I have another plug for single terminal in a box. Pay no mind to that nasty filter :/
  8. plummrey

    Lights are all wonky

    I’m going to install led flasher since I read led bulbs won’t work right with the regular flasher relay,, but even before when bulbs were regular 1157s a couple did not work right. I did clean the sockets too today, tomorrow I’ll receive the flashers. Also got a headlight switch on the way too...
  9. plummrey

    Lights are all wonky

    Scratch that about the gears it’s going in gears now
  10. plummrey

    Lights are all wonky

    No worries, I cleaned the grounds I could find in the hood, I installed i new windshield wiper/signal switch stick, I couldn’t feed it through the column so I just have the cord on the outside plugged in, but now when I do any signals all the light flash except front left marker. Also it will...
  11. plummrey

    Lights are all wonky

    I only saw the plug for the clock, the black cable (looks like cable tv cord), plug beside that and the large plug with all the cables, I will check the grounding as you said by the brake, been cleaning the grounds I see under the hood, haven’t hooked them back up yet though, will check...
  12. plummrey

    Lights are all wonky

    Yes please see if you back marker lights blink with your signals
  13. plummrey

    Lights are all wonky

    Thanks, I’ve been looking on here at other posts too and will check groundings, this pic attached is like the housing for my taillights, the left side, the top is running/brake/signal the bottom reverse and the smaller hole has the little bulb that signals with the regular bulb signal. It’s to...
  14. plummrey

    Lights are all wonky

    I also checked the gauge cluster circuit board and there’s no burn outs or breaks, replaced bulbs though
  15. plummrey

    Lights are all wonky

    1984 C10 just got it in Dec and finding stuff. With my lights on for night time: there's no dash lights, left taillight light doesn’t work (not sure for breaks last time I check they did) With my lights off: put left turn signal on and front is fine, large taillight blinking but not the...
View older results

Latest posts

Forum statistics

Threads
44,166
Posts
950,718
Members
36,282
Latest member
Doug Hampton
Top