Search results

  1. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    Got my parts and signals work ,, horn didn’t though,,, also my locking plate has the ring back on but plate isn’t flush or within on side the column,,, I ordered a new lock ring to see if a non worn one will work,,, the old one is in place but i can still try to push the plate back a little real...
  2. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    Yes that part, I agree!
  3. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    Thanks, I didn’t see anything burnt when looking a little bit ago. Hopefully the replacements will work, i didn’t get the part that the wiper stalk goes into with the wiper/ cruise control wires (my cruise control doesn’t work so I have a regular stalk in) not sure what that part is called but...
  4. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    No problem it is appreciated, yes wipers are on the column and i didn’t need to unplug that one underneath, and I made sure the long plug from the signal cam is matched up with colored wires (it won’t snap in if it’s turns around) I may just try new signal cam since they are too expensive, also...
  5. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    I just checked and it’s snapped in all the way , wires are fine not broken or anything.
  6. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    I will double check tomorrow, it clicked when snapped in while pressing down on each end to make sure all is together since it’s wide
  7. plummrey

    Hazards, signals and horn not working after steering wheel reassembly

    Was changing the ignition cylinder and had to realign the rack and plastic gear for the rod that connected to the nss switch, put everything back and the horn, hazards and signals won’t work (they worked before) My regular lights, parking lights and bright clicker works. The plastic piece for...
    • plummrey
    • Thread
    • no horn no signal not hazards steering wheel reassembly
    • Replies: 11
    • Forum: Tech Discussion
  8. plummrey

    Another ? Won’t crank, stalls and gears won’t go in gear

    Not sure what electrical would be but inside I can change gears as indicated but none are engaging I guess would explain better, you know when you put it in gear you feel it go in gear and hear it, but nothing is happening. Tomorrow I’ll do underneath to see about any linkage problem
  9. plummrey

    Another ? Won’t crank, stalls and gears won’t go in gear

    Lol Ive been having the wheel chocks no doubt, not trying to get rolled over regardless of what I’m working on
  10. plummrey

    Another ? Won’t crank, stalls and gears won’t go in gear

    Po put nice new battery cables, wires are correct on the starter. It starts up like it should now, just wondering about it not shifting, this really was all the sudden, a couple months ago. I drove it around the block in January no problem, no stalling, no up or down shift problems. Then in...
  11. plummrey

    Another ? Won’t crank, stalls and gears won’t go in gear

    Update: as far as cranking up she’s good to go (new oil, trans. fluid, new starter and spark plugs <po only did wires and new distributor>, new speedo gear housing, check the governor moves fine left her on and still not going in gears just want to go forward, in reverse nothing, linkage turns...
  12. plummrey

    More Help identifying

    *exhaust manifold bolts
  13. plummrey

    More Help identifying

    i don’t recall seeing a smog pump or the pipes that would be on the sides. There’s like welding on the manifold bolts (not sure if that’s cause they’re rusted and maybe leaking at one time), a plug by the thermostat housing and a triangular metal piece bolted on top in front of the distributor...
  14. plummrey

    More Help identifying

    would there be a wire coming out at the top,, I can look better tomorrow,, and this up is the sensor correct? (Down by the oil filter) I hope so cause I finally traced the Lt. blue wire that can be hooked to the electric choke
  15. plummrey

    More Help identifying

    I see #2 is for the cruise control but the throttle linkage connector is broken off
  16. plummrey

    More Help identifying

    I have looked at my sticker for hose hook ups but how can I go by it if some hoses aren’t needed anymore
  17. plummrey

    More Help identifying

    7) someone said it’s the lock up wires from the trans, where would this dark orange plug plug into,,(it goes down in that direction but so does number 8) 8) this plug also go down towards as mentioned before, but reading other posts this is for the lock up, is there supposed to be a hose...
  18. plummrey

    More Help identifying

    I’m wanting to reconnect hoses for ac/heat since po said not working and hoses are disconnected along with cruise control. While looking found some things unhooked. The charcoal canister is unhooked, even though where I’m at ,20+ older vehicles don’t need emissions test for inspection, does it...
  19. plummrey

    How does this leak

    It looks like it’s got to be one or the other, not both (to plug the slip yoke hole and to have a sleeve with o-ring), might be better to not have the sleeve & o-ring and just plug the hole. So when the o-ring wears out then I don’t have to take everything off again
  20. plummrey

    How does this leak

    I thought maybe I won’t park on steep hills or maybe just drive in reverse if we go to the mountains lol, but since all stuff is out I might as well try to fix whatever now
  21. plummrey

    Hooking up the electric choke

    Correction on users name, Chengny
  22. plummrey

    How does this leak

    Imma back lol kinda obsessed with reading up on this, I read in my manual ‘some models will not have a sleeve’ . That’s fine but reading around it seems the ones with the sleeve are for the vented yokes, and ones without holes in the yoke don’t have the sleeve and parts are lubricated with trans...
  23. plummrey

    Hooking up the electric choke

    I was trying to find the Lt blue wire from the oil pressure switch to use, finally realized that this little fella is the end of that Lt blue wire but wasn’t thinking about the spade connector was probably for the old choke terminal, so didn’t think about that wire anymore until todays aha...
  24. plummrey

    How does this leak

    I have that seal your talking about coming Monday but I’m referring to the sleeve that’s missing, I found info online when looking into the hole in the slip yoke that trans fluid was leaking out at off, it needs the sleeve and small o ring that fits within the sleeve, in my shop manual it also...
  25. plummrey

    How does this leak

    Well,,,took the ext. housing off and…..isn’t this supposed to have a sleeve??!!

Latest posts

Forum statistics

Threads
44,167
Posts
950,745
Members
36,282
Latest member
Doug Hampton
Top