Search results
-
Just fyi - I dyed my carpet - it came out great
Im not sure, I'll let you know when i get home this evening. After i got done i moved it inside (hadgloves on) and haven't touched it since. Ill let you know -
Just fyi - I dyed my carpet - it came out great
Texas 87R10 ifpr changes lile that, I'm not so sure spray would be best. You might have to do apply more than twice. - but, for a color change like that - I would try the spray first, Because, you could always back it up with the RIT DYE - I watched a few videos on the RIT version - that... -
Cluster install for DUMMIES...help
Thanks you and - yes I think you would come right by me - Something else too, there's a great local owned steakhouse in Fitzgerald, I know where it is - I can't recall the name - but, I know someone who does - I'll ask her tonight and get back with you on that.- Jwernatl
- Post #15
- Forum: Electrical & Audio
-
Just fyi - I dyed my carpet - it came out great
Hey All - I wanted to let everyone know - if you've considered 'dyeing' your carpet, I did it this weekend and it turned out great. I applied it twice.- 40 minutes apart My original carpet was charcoal - I went black. I ended up using the 'spray' Dupli-Color®’s High Performance Vinyl &... -
Cluster install for DUMMIES...help
Thank You so much!! Can I ask where you got that? I've been searching for a week or better.- Jwernatl
- Post #13
- Forum: Electrical & Audio
-
Cluster install for DUMMIES...help
I wish you were my neighbor! You just made something, that was, so difficult for me - so very simple. I'll pay you a $100 if you tell me were to hook every wire! Seriously. - if you can make it simple, like that - you have a talent, you've probably forgotten more than I'll ever know. - - I...- Jwernatl
- Post #12
- Forum: Electrical & Audio
-
Kick Panel (A/C Truck) passenger Rust
Hey All - this has been great resource for me while I'm restore my '87 V10. The best actually. As some of you may know, this entire complete interior make over started tight replacing the heater core! crazy I know right?? I pulled out the passenger side kicks panel - it looks like it's... -
OPTIONS for bench seat and carpet -
Swearbody Im sorry about that - didmc =mean to call you Octane... I would drive B'ham - know what really like - SIMPLICITY-- https://www.etsy.com/listing/597536324/the-easy-rider-custom-upholstery-cover?ref=shop_home_active_3&frs=1 But I'd think I'd rather have professionally installed... -
Cluster install for DUMMIES...help
Hey Turbo Dog - 'that came from the HaYNES REPAIR MANUAL' for 67-87 CHEVY GMC Pick ups. (which in my opinion is a wast of ink)- Jwernatl
- Post #8
- Forum: Electrical & Audio
-
Cluster install for DUMMIES...help
Here's the manufacturer.... https://shop.classicinstruments.com/velocity-black-1973-87-chevygmc-truck-package I got this from LMC... part# 37-8827 https://www.lmctruck.com/1973-87-chevy-gmc/chevy-1973-91-classic-instrument-gauge-clusters Can I ask - why you think it's wrong? I didn't put...- Jwernatl
- Post #7
- Forum: Electrical & Audio
-
Cluster install for DUMMIES...help
I found the diagram below. - I think I- Jwernatl
- Post #3
- Forum: Electrical & Audio
-
Cluster install for DUMMIES...help
Hey guys, Im about install the cluster from CLASSIC INSTRUMENTS - I need to HACK my wire harness and tie it into the new cluster - I've been looking for a wire diagram that I can understand, for exactly my '87 All of them have ranges... - and I'm not very good at reading those. Im...- Jwernatl
- Thread
- Replies: 21
- Forum: Electrical & Audio
-
Wiring Diagrams
Hey guys, Im about install the cluster from CLASSIC INSTRUMENTS - I need to HACK my wire harness and tie it into the new cluster - I've been looking for a wire diagram. There are so many - and I'm not very good at reading those. Im trying.....But it's freaking hard. I don't have 'that'...- Jwernatl
- Post #11
- Forum: Electrical & Audio
-
OPTIONS for bench seat and carpet -
@Jwernatl you are only an hour and a half from me if you dont have any luck in ATL( which im sure you could). We are bleeding upholsterers in BHam so I can only assume the competition has driven the price down. may be cheaper in a hole like bham since hotlanta is taking all our real high dollar... -
OPTIONS for bench seat and carpet -
you wouldn't happen to have a picture of them in the square body would ya?? I'm considering going this route. BUT - I just gotta see them in a truck. ya know?? -
OPTIONS for bench seat and carpet -
I called 4 upholstry shops today. $1,200 to $1,500 - each shop all about the same. Crazy nuts. Im not cheap, but I like my stuff right. So I got to looking - found...LMC has that split bucket bench for $1,200 - I would need to see it in a square body for sure. I like the look of the... -
OPTIONS for bench seat and carpet -
awesome -- it had the 'rubberish and very thick pile undercoating - I do need to replace the insulation - I'l run up to advance / napa or ORielys and see if they have some. But what did you use for insulation? -
OPTIONS for bench seat and carpet -
fantastic! I didn't know that was available. the carpet is in great shape. the '87 has been taken care of so well. its really in great shape. -
OPTIONS for bench seat and carpet -
Hey all - ya know how a little heater core replace goes unlimited? I now have my dash, my gage cluster, the seat and the carpets out! Back three months ago, when the hater core popped - it dumped all the antifreeze on the floor - today I pulled the carpet back - it was still wet... -
Edelbrock Pro-Flo 4 - replacing my TBI any thoughts anyone done this?
hmmmm..... ok - you're right. Let me get the rubber in the doors, windows working right, this damn heater core back in, dash pad and vents and blah blah blah installed- and I'll install pro-flow 4 instead of TBI - anybody want that HOLLY TBI?- Jwernatl
- Post #23
- Forum: Engine & Performance
-
Heat/AC Blend Doors
I must b e an idiot - I have 1987 V10 350 w/ac - My heater core popped so - I did what I do - pulled the box What's the trick to get the heater CORE out? I took the top 4 screws out that were around the heater core section - from the video I saw on line - its supposed to pull out. (Im... -
Edelbrock Pro-Flo 4 - replacing my TBI any thoughts anyone done this?
Hey Franken - thanks for the reply. I think I'm going to go with that HOLLY TBI unit. - Reason being, I'm restoring the truck. But I'd like to drive it while doing so - I go that drop in TBI so cheap. Im keeping the PROFLO - (I'll install it by next summer) - I would appreciate if you'd let...- Jwernatl
- Post #21
- Forum: Engine & Performance
-
Edelbrock Pro-Flo 4 - replacing my TBI any thoughts anyone done this?
how's this install going? - I just came across a HOLLY replacement TBI - I could swap that in and go.. (I paid $250 for it. brand new in box) I go the proflo4 in tuesday. Haven't toouched it, but man there is a lot to deputing this in.- Jwernatl
- Post #19
- Forum: Engine & Performance
-
Edelbrock Pro-Flo 4 - replacing my TBI any thoughts anyone done this?
I pulled the trigger on the PRO FLO - it's sitting in the garage. BUT, just came across this Holly - This morning a friend called, he ordered by accident -He sat on it since June and can't return it. I just paid him $250.00 for it. - never been opened. - NOT what?? Jeeze....I could thow...- Jwernatl
- Post #18
- Forum: Engine & Performance
-
Edelbrock Pro-Flo 4 - replacing my TBI any thoughts anyone done this?
That was kind of my thought process right now "mild daily driver" with ZERO worries. But, for all fairness, I thought about swapping the current TBI with a rebuilt/remanufactured TBI unit (that's sort of the reason for my post, I wanted to make sure I was thinking clearly - I needed...- Jwernatl
- Post #7
- Forum: Engine & Performance
