Search results

  1. Charlie

    Dash Mat Covers

    https://www.covercraft.com/us/en
  2. Charlie

    What's the good AC compressor these days?

    This is one I had Installed July 2022 and has worked perfect since. I had the A6. There may be one for the R4 if it has different hose connections at compressor, I'm not sure. I have no regrets since I had several rebuilt A6's since 2015. https://nostalgicac.com/a6-to-sanden-conversion-kit.html
  3. Charlie

    Heater Motor?

    That is the LO speed for the blower. If you have 4 speed fan switch with no off position. Other years may differ. I do have AC but not sure if that matters.
  4. Charlie

    Heater Motor?

    For the blower motor not to run all time, need to remove the upper wire from the connector on the resistor. Mine is the yellow wire in the pic.
  5. Charlie

    Glide out spare tire carrier

    You're welcome. It was nice to meet you. You have some very nice trucks. I wish mine was as nice as yours are.
  6. Charlie

    Glide out spare tire carrier

    I did not get any other hardware with it. I had a thought at one time to try to fit under my truck but decided not to. Will PM you.
  7. Charlie

    Glide out spare tire carrier

    This is the one I have.
  8. Charlie

    Glide out spare tire carrier

    I have one similar to this pic. (Pic from internet). It came with my truck when I bought it. 74 did not have them. I have an in bed tire mount. If you can use the one I have, you can have it. I don't have any other hardware for it. It has been sitting around for 6 years and probably will if you...
  9. Charlie

    interior lights cut off?

    This is how I have done mine. I use to do this to the cars I had in the 70's. Works great for me. I have one on each door. 1st pic, door open, light on. 2nd pic, door open, light off.
  10. Charlie

    Armrest Pads

    Click on "Upload File", then select location of file, then "open" it will load pic.
  11. Charlie

    Armrest Pads

    Pics of the Challenger please! I am an old Mopar guy also.
  12. Charlie

    Overheating at idle ... 1979 c10

    A pic of your setup would help to see what you have. In my opinion, I would not think 1600 cfm from 2 fans would be enough. If they were 1600 cfm each, I would think that would be sufficient.
  13. Charlie

    Blower works on high only

    Mi Mine went out 2 years ago. Fuse holder burnt. Replaced with same type and no more problems. I also deleted the low speed fan by removing the top wire from the resistor connector. Now I have 3 speeds and the low position is off. Works great.
  14. Charlie

    Blower works on high only

    If yours is similar to mine, here is the fuse for fan high speed and resistor.
  15. Charlie

    81 C10 pulling right

    Yes, this!
  16. Charlie

    Connectors

    This place might have the connectors you need. https://www.repairconnector.com/
  17. Charlie

    Proper high beam switch mounting

    You can get one from ebay. I got one there a couple months ago. https://www.ebay.com/itm/272566654159?hash=item3f763d14cf:g:PFQAAOSwcfdbBFkA
  18. Charlie

    "Hypothetical" Question (Wink Wink)

    :insane:
  19. Charlie

    QJet Identification

    https://www.carburetion.com/CarbNumber.asp?Number=17080213
  20. Charlie

    GM Square Body Forum Decals

    None of the links work for me.
  21. Charlie

    What have you done to your square lately??

    Check this out.
  22. Charlie

    What have you done to your square lately??

    Thanks. Please give update on how they ride and handle.
  23. Charlie

    What have you done to your square lately??

    What is their part number for those? I have the part number 34824 that were replaced by the PO. Thinking about maybe replacing them. They were replaced about 6 or 7 years ago. Not very happy with them.
  24. Charlie

    Runs rough on acceleration

    UPDATE I performed all the troubleshooting I could do with only having a carport and limited tools. Finally decided to take it to my tech and said my cam had finally worn down that is causing the rough running. He had discovered the #8 cam lobe was worn a few years ago when replacing the valve...
  25. Charlie

    Runs rough on acceleration

    I have rechecked all vacuum lines, plug wires and all are good. Pulled dist cap and nothing bad found. Checked fuel lines and cannot find anything I can tell that is causing this. Would a bad ignition module cause this or possibly coil? I have had a no start due to the module before.

Latest posts

Forum statistics

Threads
44,167
Posts
950,725
Members
36,282
Latest member
Doug Hampton
Top