Search results

  1. LateOnTheBrakes

    Front Shackle hanger bolt

    Do you have a photo of the front shackle? I am in the process of getting ready to remove a shitty lift from my 86 CUCV. I'm interested to see how the OEM shackle looks compared to these homemade looking shackles.
  2. LateOnTheBrakes

    Gauge Cluster Swap

    Assuming all the pins are there. But as I said mine was the diesel CUCV and everything seems to be different.
  3. LateOnTheBrakes

    Gauge Cluster Swap

    Sounds like I will have to find a wiring harness from a gas truck to make this work without having to re-pin connectors. Maybe I will save myself the headache and get the dakota digital dash.
  4. LateOnTheBrakes

    Gauge Cluster Swap

    Oh, I know where the sensors and senders are. I just don't know what to do with the gauge cluster and the printed circuit board. What do you mean by re-pin? The connector that goes into the gauge cluster or the actual board where the gauge attaches?
  5. LateOnTheBrakes

    Gauge Cluster Swap

    Forgive me if this has been covered before but I am not coming up with anything when I search. My truck is an 86 CUCV. The "diesel fuel only" gas gauge and the dummy lights for the two generators are of little use to me. I want a setup with the unleaded gas, oil pressure, water temp, battery...
  6. LateOnTheBrakes

    LS swap with 91 suburban gauges

    Where did you get the info to swap your gauges around? I have the dash from a CUCV and I want to swap to the similar gauge setup you have. I bought a spare gauge cluster. I don't know if I should move the fuel, oil pressure, water temp, and alternator info over or swap the whole gauge cluster.
  7. LateOnTheBrakes

    1979 k30 dually in Colorado

    SM464?
  8. LateOnTheBrakes

    Fuel Filler Neck

    Ok. Hopefully I have my info in enough places now. The truck (frame/body) is an 86 CUCV. The drivetrain is out of an 86 K10 truck and who knows where the axles came from. It has the driver's side fuel tank. I need a part number for the two hoses (3 & 5) pictured below. I would like to pick one...
  9. LateOnTheBrakes

    Fuel Filler Neck

    LMC has it on backorder and isn't taking new orders. Who knows when things will get back to normal there. I was hoping to find a local source like Autozone/Advance/O'Reilly.
  10. LateOnTheBrakes

    Fuel Filler Neck

    My bad. I thought it was in my signature. 1986 K30/CUCV.
  11. LateOnTheBrakes

    Fuel Filler Neck

    Is there a specific part number for the hoses that are the filler neck and vent for the tank? Is it just a very big diameter fuel hose cut to length?
  12. LateOnTheBrakes

    86 M1008 LM7 Swap

  13. LateOnTheBrakes

    86 M1008 LM7 Swap

  14. LateOnTheBrakes

    86 M1008 LM7 Swap

    Got the engine painted and installed in the truck. Got the radiator installed, accessories installed, etc. At this point I'm procrastinating on modifying the wiring harness and need to figure out the fuel system.
  15. LateOnTheBrakes

    5.3 LS Swapped Computer Program

    I'm trying to learn it as I go but my local tuner is being cryptic and unhelpful. I have an L59 PCM, TAC module, pedal, and harness I would like to put in my 86. I want to use the SM465 but he is bitching about having a VSS for idling. What is the bare minimum that needs to be done to the PCM to...
  16. LateOnTheBrakes

    Someone settle the motor mount debacle

    Do you still have those parts? Are we talking about the butchered parts in the images I've attached?
  17. LateOnTheBrakes

    Engine Mount Question

    My question is does either piece of the hinged piece I have get reused? Do I need to buy the mounts below? Does the dirty dingo mount bolt straight to the mount below?
  18. LateOnTheBrakes

    Engine Mount Question

    I'm asking what the original engine mount looks like. The truck started life with the 6.2L diesel, I think it had a 4.3L in it at what point, and it has the 350 SBC when I got it. The mounts I showed do not look like every mount I come across.
  19. LateOnTheBrakes

    Engine Mount Question

    What parts do I need to connect my 5.3L to the frame of my truck? I bought the dirty dingo engine mount adapters but the mounts that came out of the truck look nothing like the mounts that are sold at the auto parts store. Should I be bolting up to the 3 holes or slots?
  20. LateOnTheBrakes

    86 M1008 LM7 Swap

    Can someone post a picture of what the engine mounts should look like that I'm bolting to my new dirty dingo adapters and how it should bolt into the truck? Whoever had the 350 SBC in the truck seems to have done a shit job. It's a hodgepodge of slots and holes and they picked up 3 of 4 bolt holes.
  21. LateOnTheBrakes

    86 M1008 LM7 Swap

    I didn't realize the pedal was one of the adjustable style. But it made sense after you said something. I am pretty sure I can make something work. I am interested to see what you did if you come across a picture.
  22. LateOnTheBrakes

    86 M1008 LM7 Swap

    Now am I to the point where I need input from the community. Is there a bracket available to make this pedal work in the truck? Am I wasting my time? I see talk of using a diesel pedal, but I already have this one and would like to make it work so it will talk to the TAC pedal and PCM. If I...
  23. LateOnTheBrakes

    86 M1008 LM7 Swap

    Trying to figure out how this 2005 Suburban pedal will fit in the truck or if I need to go another route.
  24. LateOnTheBrakes

    86 M1008 LM7 Swap

    Finishing up mechanical rebuild and prepping for blasting/painting.
  25. LateOnTheBrakes

    86 M1008 LM7 Swap

    Finishing up and putting in my truck for transport to my farm.

Latest posts

Forum statistics

Threads
44,167
Posts
950,720
Members
36,282
Latest member
Doug Hampton
Top