Search results

  1. pduffyd

    Inherited Grandpa's 78 C20 - SM465 help needed!

    Oh forgot to add this link on differences between 4wd and 2wd 465 versions. https://www.novak-adapt.com/knowledge/transmissions/manual/sm465/
  2. pduffyd

    Inherited Grandpa's 78 C20 - SM465 help needed!

    Hi Gijordan07 For parts try here and a history on the SM465. https://www.novak-adapt.com/catalog/transmission/transmission-parts/sm465-parts I bought the felpro gasket set as they are thicker and better quality. A damn good way to rebuild a 465 is here. . And yes the long wheel base 131.5"...
  3. pduffyd

    2WD Front End Parts

    I will PM you.
  4. pduffyd

    2WD Front End Parts

    How much for the sway bar? It looks good.
  5. pduffyd

    Wts: Wiring harness out of an 84 k10

    Hi Pender, do you still have this loom? Can you put it in a box and post it? Just PM me with details, it looks pretty complete
  6. pduffyd

    Will my 12" clutch fit on the stock flywheel?

    whow, didnt know that! That would be a BIG clutch. Yeah I couldnt find the part number for the tin, but I came across this bell for $100, so I had to get it. It would be nice to have the cast iron back on though. This is my set up, the measurements maybe useful to you.
  7. pduffyd

    Z Bar issues SM465 - 350 - NP208

    looks like you are doing lots of work on your square. Keep going it will all pay off, for a fun and reliable truck
  8. pduffyd

    Z Bar issues SM465 - 350 - NP208

    Yep thats the fuel neck, its a long wheelbase cab chassis. 131.5" wb. Im doing a restomod, 75 chassis with a 59 cab/body. Well gotta save money now to buy the sheet metal. I have a build thread going. Its got a 454 with my rebuilt 4 speed 465. I got rid of the side tank, and got a 31 gal in the...
  9. pduffyd

    Will my 12" clutch fit on the stock flywheel?

    hi Eborges19 I put a 12" clutch on my sm465 behind my 454. Ive got the 168 tooth flywheel, I know its different on a BB to an SB, but I had to change my bellhouse to a 460486 to accomodate the 12" clutch. I used to have a 292 L6, in the truck ( long gone), which had the stock 11" clutch in it...
  10. pduffyd

    Z Bar issues SM465 - 350 - NP208

    Hi, I will give my 5c worth. I have pulled the z bar system off my 76 C20 with a sm465. The z bar on mine, at the tranny, had one side pivot bolted into the bellhouse, not engine block. The other side was the frame bracket. My frame bracket was worn out as the pivot bolt on that side had come...
  11. pduffyd

    Write up: Gas Tank Relocation

    Customblue, got any photos of the fit? I wasnt sure on the extra length of the 40 gal. As im in Australia, I didnt want to chance it, hence the 31 gal.
  12. pduffyd

    Write up: Gas Tank Relocation

    I just found this tread. Would have saved me a lot of time looking for information. Lol I used a 31 gal in mine, spectra blazer tank and sender, went to efi setup. Fits great on a 76 C20 131.5"WB. Dont want to hijack. #70 post on my thread
  13. pduffyd

    1985 Monte Carlo SS

    Love this SS Crispy. Had to sell mine for my square project. Mine was an 84 SS, with a crate 350 and 4l60 hydromatic, plugged right in so I had overdrive with the factory torque coverter lockup. 2200 at 65mph, much better than 3000 with my MV4 th350! Loads of fun!
  14. pduffyd

    Need help identify my BB

    If you are ever looking at getting a 454 LE8, have a look for a motorhome thats being wrecked. Thats where I got my 30000 mile BB, all original for no money really. Good compression and bores. If you use your heads they will flow better than the peanut ports on the LE8 for sure. I want low down...
  15. pduffyd

    Need help identify my BB

    Yeah the 70-72 402ci truck engine sounds like a match to me, with those heads in the same years. Doesnt seem to be an LE8, I have one, I put in my C20, it has a casting number 14015445 Big Block V8 1978-1990 454, 2 bolt or 4 bolt mains. I lucked in on a 4 bolt! Good Luck.
  16. pduffyd

    Bed to cab gap????

    I found this site with measurements, it may help a bit. This Fleetside body shows (measurement "N") 1.93" gap between the box and the Cab, measured through the center line of the truck. http://brochures.slosh.com/dimensions/
  17. pduffyd

    Need help identify my BB

    BigRod Hey at least there is one mystery solved, its a 454 MKiv LE8. So that explains the 454 head codes. But the block casting number doesnt match. Replaced? Right so my book says that an LE8 is a 86-89 454 with 240 net HP, low deck truck engine only with 2 or 4 bolt mains, small oval port...
  18. pduffyd

    Need help identify my BB

    hey Bigrod84. You said you got some cool RPO codes. do you have a photo of them, the glove box one, or if you are lucky the one under the bench seat? I was looking in my Chevy Big-Block book, and the 402 shows as LS3, L34 or L78 for a 1970 truck codes, I know yours is later but just wondered...
  19. pduffyd

    Need help identify my BB

    Trying to load the lime book and BigBlock casting number data, see attached below. This is a handy little pic of doing your vin id for older squares. Anyway, yep cant find XXW either? Tonawanda plant which is pretty much all big blocks I understand. 3999290 Block 1972 402 240 hp 2 bolt...
  20. pduffyd

    Need help identify my BB

    If its a mkiv 454 look for the stamped number just above the timing chain cover, on the block infront of the intake manifold Then google "limebook" it has all the info on where it was built and what for
  21. pduffyd

    Dont let this happen to you. Terminator from HOLLEY!! my favorite Co.

    Square root, what Edelbrock are you running. After looking at that video, I'm looking at a proflo4!
  22. pduffyd

    Chassis brace help

    Yeah true that Geoff. You too mate. Keep washing those hands! Lol
  23. pduffyd

    Chassis brace help

    GTP51, yep about the same from my place I live in Cranbourne North.
  24. pduffyd

    Which 4L80e do I need?

    Hi R3500. Im doing the same for my 75 C20 right now, with a 454. Not many to choose from in Australia! But for you there should be plenty. Doesn't really matter if its a carb or tbi. Might want to look for a replacement computer for a manual setup for the engine management side, or maybe just a...
  25. pduffyd

    Chassis brace help

    GTP51, for someone a bit closer. Try these guys too.

Latest posts

Forum statistics

Threads
44,164
Posts
950,695
Members
36,277
Latest member
chevyBlu
Top