Search results

  1. custodian

    Caulking In Bed

    Thanks, found several different brands.
  2. custodian

    Caulking In Bed

    Can anyone tell me what type the caulking is on the inside of the bed and where I can buy some?
  3. custodian

    LS Fuel Pressure

    Your #3 advice was what came in mind, will do that first. As for the venting, an oversite on my part. I still have the charcoal canister that was on the truck. I have ordered the 3 outlet sending unit. I'll be using a different fuel pressure tester. Had just put a cheap gauge on the fuel test...
  4. custodian

    LS Fuel Pressure

    Yes, 5/16" line as return all the way back. Vented, I guess not. Will have to get this fixed. That might be the cause of my fuel pressure.
  5. custodian

    LS Fuel Pressure

    I guess I'm not.
  6. custodian

    LS Fuel Pressure

    This is the one I think I need.
  7. custodian

    LS Fuel Pressure

    This is the style of the fuel sending unit I have in the truck right now. Is the return inside the take, the knob looking thing, a vent?
  8. custodian

    LS Fuel Pressure

    Yes, return style system, 3/8" inlet fuel line with filters, 5/16" return line back to the tank.
  9. custodian

    LS Fuel Pressure

    Thought about adding an adjustable fuel regulator.
  10. custodian

    LS Fuel Pressure

    Uhmm, return system. If I remember right, I used the stock 73 sending unit with two outlets. Could that have an effect with the LS fuel return?
  11. custodian

    LS Fuel Pressure

    PSI stays above 100 when running with the vacuum line to the regulator hooked up or removed. The fuel system is the stock 2002 Silverado with fuel return line.
  12. custodian

    LS Fuel Pressure

    Motor has been running very good, have been getting PO codes for rich mixture, regulator is vacuum referenced. Just checking out all possible causes.
  13. custodian

    LS Fuel Pressure

    It has the stock vacuum regulator mounted on the fuel rail.
  14. custodian

    LS Fuel Pressure

    I installed a fuel pressure gauge on the 5.3LS in the 73 C10 at the pressure test port. I currently have an external Walbro fuel pump. When I turn the key on, the gauge reads right at 58/59 psi. When I crank it, it reads over 100 psi. Any thoughts?
  15. custodian

    LS Fuel Pump

    I'm going to change from an external fuel pump to an intank EP381 fuel pump on the 73 C10 with the 5.3LS swap. Will the sending unit/hanger from an 87 work in the 73 tank?
  16. custodian

    81-87 ACC Carpet

    SOLD.
  17. custodian

    FiTech Go EFI 4

    Sold.
  18. custodian

    LS Swap 5.3 Exhaust Question

    I used the Camaro manifolds and delete pipes on my 73 C10 2wd.
  19. custodian

    Bulkhead wiring ..HELP ..1976 K10

    When I did my LS Swap in the 73, this is what my bulkhead connection looked like. I cut out the wires I didn't need, just left them long enough to reconnect if ever needed.
  20. custodian

    RockAuto Magnet trading?

    I have hundreds of these.
  21. custodian

    SBC Rocker Arms

    How much shipped to 28609, Catawba, NC?
  22. custodian

    High Amp Alternator

    It's working like it should. Was just a thought about changing to a higher amp alternator.
  23. custodian

    High Amp Alternator

    Working like it should, was just wondering if a higher amp alternaor was worth it.
  24. custodian

    High Amp Alternator

    I have a 2002 Chevy 2500HD 6.0 4X4 that I tow a 35' travel trailer. The travel trailer has two deep RV batteries that are charged while driving, also I run two 12v refrigerators while towing. Now my question. Would I benifit to install a 255amp alternator on my truck? it currently has the...
  25. custodian

    Hood Hinges

    I used a ProGold ProLink chain lube for now. One side came down a bit but the other side still wants to stay up some.

Latest posts

Forum statistics

Threads
44,166
Posts
950,716
Members
36,282
Latest member
Doug Hampton
Top