Search results
-
Auxiliary Battery Tray
I used the original computer holding bracket (the plastic part), trimmed off the back side and mounted it to the fender well. -
-
Auxiliary Battery Tray
This is what mike looks like so far. I'm using the original 01 fuse box. -
Auxiliary Battery Tray
The 85 this one came from was once a diesel. I've been looking for a drivers side for the 73. Haven't been able to find what I wanted, so, I made one. -
-
Auxiliary Battery Tray
Looks to be the passenger side. I'll go out and check mine. -
-
2005ish 6.2 LS3 complete 200$
If it was close to me and still available, I'd buy it. I'm looking for another LS/trans setup. -
-
Traction Bars
Lakewood traction bars for a 2WD 73-87 C10. $100 -
Auxiliary Battery Tray
I started making a battery tray. I use the original computer mounting bracket that mounted to the firewall in the 2001 Silverado, trimmed some off that bracket, the tray from the passenger side and a piece of angle iron. Fit in good and will use self tapping screws to bolt to the fender. -
SBC STUFF
I'm cleaning out my building of all my older SBC stuff. I have 2 quadrajets, one I know is good to go the other I'm not sure, a 1964 283 bare block with main caps that's never been bored, a 307 block with crank, pistons and rods (disassembled), a rebuilt points distributor (almost new), Used... -
Auxiliary Battery Tray
I might have to make the lower bracket if I can't find one. -
Auxiliary Battery Tray
I tried the one I have from the 85 C10 that used to be a diesel. Couldn't get it to fit right unless I butcher it up, which I don;t want to do. I have plenty of room for one. -
Auxiliary Battery Tray
I'm looking for an auxiliary (drivers side) battery tray for the 73 C10. I've looked online and they are all on back order or for the 81 up. -
Looking for a couple 2 bbl carbs
Send me your complete address. Will ship it for FREE. -
-
Power Steering Pump Fitting
Not yet. I can find the ones that use the nipple and o-ring. -
Radiator Options
I have the CU730 in the 85 C10 with a 350/700r4. Bought it years ago. I also have an all aluminum Champion radiator that I took out of the 73.- custodian
- Post #7
- Forum: Engine Swaps (Gas) LS, Vortec, LT1 , etc.
-
Radiator Options
I'm using a 2001 Silverado 5.3 stock radiator in my 73 C10. I've got the the bottom worked out, drilled a hole on each side and used stock rubber mounting pads. The top I've not got 100% figured out yet, but have an idea for the filler and mounting up top. I had to trim the fan shroud. The only...- custodian
- Post #5
- Forum: Engine Swaps (Gas) LS, Vortec, LT1 , etc.
-
-
Power Steering Pump Fitting
I need the fitting off the back of a 1973 C10 power steering pump. Looks like the picture, but will have the flat flare seating instead of the nipple with o-ring and flare seating. -
Looking for a couple 2 bbl carbs
I have one from a 307. It's disassembled but all the parts are there with a rebuild kit. You can have it, just cover shipping.
