Search results

  1. 80BrownK10

    Installation information for Radiator #CU730

    Yea that's a good price and I'm in the south east. If we were buddies and closer I'd give you the money for half a dozen jugs of it. Always need it for stuff and putting off coolant changes.
  2. 80BrownK10

    Popping noise heard & felt when in hard right turn from standing stop

    I use to have a bad clunk when I got on the gas hard in 4wd. It didn't have to be turned though. Mine ended up being soft collapsed transmission/t case mounts. New firm mounts didn't allow the drivetrain to torque over and front drive shaft to hit the cross member. Really don't think this is...
  3. 80BrownK10

    Free used carpet if you pay shipping.....pics..

    Well man I was serious thinking about it. Good offer, great on you!
  4. 80BrownK10

    Tick at idle

    I'm not an engine internals expert but if there original ones there probably higher quality than aftermarket junk but they could be worn or have junk in them. Maybe run some Marvel Mystery Oil at the rate they recommend 20% replacement, for a few hundred miles and see if it has any effect.
  5. 80BrownK10

    Zinc, Engine oil and flat cams

    Yes I saw the idle hours you talked about. I guess I was thinking about trucks I see and know about. I'm a Forester, so I deal with other foresters , we all drive huge miles between tracts and checking loggers etc. Also deal with loggers who drive good distances to job sites. Not uncommon to see...
  6. 80BrownK10

    Tick at idle

    A weak lifter that bleeds down at lower oil pressure after a bit.
  7. 80BrownK10

    Zinc, Engine oil and flat cams

    What decade was this:oops::33:, 150k is not that many miles ??
  8. 80BrownK10

    Zinc, Engine oil and flat cams

    Yep I agree. I want to read rants and endless discussions on oil not viruses.
  9. 80BrownK10

    DIY Raptor Bed-liner

    When I had my truck painted I had the guy spray mine. I think the stuff he used was T Rex. It's the same stuff. I am really happy with it. I know the prep was almost nothing to the bed and just shot on. It looks good and is great product. If you do the prep work I know it would be well worth the...
  10. 80BrownK10

    Does a 86 C10 4.3 V6 have hydraulic lifters?

    I think it went roller lifters in 88 or 89 according bro a video Square body Stuff on YouTube did on the 4.3 just a few weeks ago. Edit: I changed my original post after reading the second response. I too confused roller and hydraulic lifers. So it had hydraulic lifters since it was designed...
  11. 80BrownK10

    Zinc, Engine oil and flat cams

    He means that they can be sold on something just by what they read or hear or see on tv.
  12. 80BrownK10

    What have you done to your square lately??

    You know what, I think I did end up with some. I think I might have bought a few gallons of some winter formula last year cause it was cheaper than Walmart brand. I could be running rain x washer fluid which would make sense to the constant beading action. But to be honest I'm not really sure...
  13. 80BrownK10

    What have you done to your square lately??

    I think mine were Precision as well. But honestly I don't remember.
  14. 80BrownK10

    What have you done to your square lately??

    Mine took awhile and ended up with some small rip somewhere on it. I think it was near the pivot point. Was pretty tough to get it in place. You count yourself lucky I guess
  15. 80BrownK10

    What have you done to your square lately??

    I think the one I put in a year or so ago was AC Delco. I had got it years earlier like 5 or more off RA. It seems to work fine.
  16. 80BrownK10

    What have you done to your square lately??

    I know I'm probably late. I used the stuff in the squeeze bottle like you in the 90s. It worked and I didn't mind. Now I'm not sure if it's even cones like that anymore. But what I have now is in a spray bottle. You apply it just like Windex. It goes on easy and seems to stay for a long time...
  17. 80BrownK10

    What have you done to your square lately??

    Like VGG says, all that shine makes a guy nervous!!:evillol::oops:
  18. 80BrownK10

    Off-road bumper ??

    Yep. It's an 80 or older. Or at least those front fenders are. Yes I see this thread is from last year but it's up top on the list
  19. 80BrownK10

    Flat towing a Suburban?

    Haha I was going to say that might work but what if they have more than 2 kids it would be tight to impossible!
  20. 80BrownK10

    My 78 Custom Deluxe gets a new gear ratio

    I kind of thought 3.73 was all that made sense as a common ratio but I didn't know if some aftermarket performance drag set or something could be that ratio...but mathematically with the diameter of the ring gear and pinion that's probably an impossible ratio to achieve? :33::evillol:
  21. 80BrownK10

    My 78 Custom Deluxe gets a new gear ratio

    Is 3.75 even a ratio used?
  22. 80BrownK10

    AXLE SHAFT HELP!!!!!

    I was lost too since he said k10 and front axles have ujoints at the knuckles on the axleshafts?? I then read Raiders post and am like what were talking about a 2wd...when I was sure I saw k10 as well as the talking about axleshafts and knuckles.
  23. 80BrownK10

    Can't identify the engine!

    I looked through mine the other day. I may have to try to get some more pics of the numbers
  24. 80BrownK10

    Can't identify the engine!

    I can't say that I'd want to even go that fast in one!!
  25. 80BrownK10

    Can't identify the engine!

    So are you telling me you were running 110 in a k5 sitting on 37's !!:eek::oops:

Latest posts

Forum statistics

Threads
44,166
Posts
950,716
Members
36,282
Latest member
Doug Hampton
Top