Search results

  1. lifeofbriank10

    Power Steering Pump Reservoir Adjustment

    Turned it in as a core so its long gone. I wish I kept it to compare more to the others.
  2. lifeofbriank10

    Power Steering Pump Reservoir Adjustment

    The line on mine does have the o ring but the pump I have I think is the type to not require it. Not as deep for sure. So I was thinking I could figure out what line I need and possibly get it going that way vs looking for a different pump.
  3. lifeofbriank10

    Power Steering Pump Reservoir Adjustment

    I ended up taking it back for a replacement and that one too was not right so they finally found one that matched my mounting bracket but now my issue is I cant get the return line to seat as if its not the correct fitting so stuck there now lol. Arg! the only number on it is 31932245p but...
  4. lifeofbriank10

    Power Steering Pump Reservoir Adjustment

    rebuilt from napa
  5. lifeofbriank10

    Power Steering Pump Reservoir Adjustment

    Hello, So I got a new pump for the 305 and the mounting bracket does not fix the pump. The resivior needs to be moved slightly to make it line up. I have never taken one of these apart and wondered how one would adjust this thing? It is pressure fitted? There are no bolts on the back like...
  6. lifeofbriank10

    Fender and Hood panel fitment

    The back on the cowl is straight You might be onto something. I just noticed the differences between the two sides of the support.
  7. lifeofbriank10

    Fender and Hood panel fitment

    So far I have loosened all of the bolts and while I can make the worse side look better, the other side now does not line up with the front grill area so I push it back to get that in line and the whole thing goes back to how it was. Makes me think the hinges might be bent or installed wrong on...
  8. lifeofbriank10

    Fender and Hood panel fitment

    Here is the other side.
  9. lifeofbriank10

    Fender and Hood panel fitment

    This is one of my next to dos. Figure out how to bridge that grand canyon gap.
  10. lifeofbriank10

    Door Hinge Pins Not Seating?

    I went to harbor freight and picked one up. It worked! Thank you!
  11. lifeofbriank10

    Door Hinge Pins Not Seating?

    These are the standard doorman replacements. Anyone else have trouble getting the pin to seat all the way? I hammered the crap out of it. No dice so far.
  12. lifeofbriank10

    Cranking but no start after finishing job

    Cold start + horn blast. ^_^ I could not get the video to upload. Maybe to big so here is a link to it on my tiktok for anyone interested.
  13. lifeofbriank10

    Cranking but no start after finishing job

    Anyone want to hear an open header cold start? Lol.
  14. lifeofbriank10

    Cranking but no start after finishing job

    If I could buy you a drink or a smoke or whatever you like I would. That was it! The cable was broken. Thank you so much! :peace: :boxing::happy160::peace:
  15. lifeofbriank10

    Cranking but no start after finishing job

    Hello, I just replaced my stock manifolds with jegs long tube headers. I also removed a 4 inch body lift. Now that it is all back together my truck just cranks and wont turn over. I feel like it isnt getting spark but I am not sure. Any ideas on what I should look for? I feel like maybe I...
  16. lifeofbriank10

    Getting ready to remove a body lift

    Thats a bummer! So I was able to get all 6 of them off. It was a huge pain in the butt. I had to cut some with a grinder/sawzaw. Had to cut into the cab floor to get to the rusted/welded bolt and then drilled it out haha. So I have all the new mounts on and the body down and I am just trying...
  17. lifeofbriank10

    Getting ready to remove a body lift

    Getting ready to remove a body lift, wish me luck! Pic for attention.
  18. lifeofbriank10

    Hello From Minnesota

  19. lifeofbriank10

    I am what I am

    Welcome
  20. lifeofbriank10

    I <3 BONDO

    Hello, My truck came with some weight reduction. I never used Bondo before but wow this stuff is easy to work with. I hope it holds up! Anyways, this was just a thread to show my appreciation for this sticky gooey bubble gum looking magic stuff. Ill post pictures of all the work before...
  21. lifeofbriank10

    I am what I am

    :peace:
  22. lifeofbriank10

    1986 cold start issue 305

    I have the same motor with the same type of issue. I as well changed lots of things and nothing made it better. So far my best guess is the engine being old takes time to build enough pressure to start. I do not have to poor anything into mine. It just takes like 10 seconds before it starts and...
  23. lifeofbriank10

    1980 k10 dual shocks to single

    Starting on the rear and the bottom has way to much wiggle room as you can see. Am I supposed to put the washers on the inside?
  24. lifeofbriank10

    1980 k10 dual shocks to single

    Finally finished after cutting all the old bolts off due to rust. Replaced with grade 8, etc, etc. That was a dirty chore! Now to hook up a battery cut off so I can figure out where my parasitic draw is coming from without having to constantly recharge, lol.
  25. lifeofbriank10

    Hello From Minnesota

    Thanks for the welcomes! :)

Latest posts

Forum statistics

Threads
44,163
Posts
950,654
Members
36,276
Latest member
2manysquares2care
Top