Search results

  1. Jawzjeep

    Bilstein Shocks Bushing/Sleeve Question

    I had no problems putting on a set. They were long enough for my 6" lift. I ordered them by length. 33-185552 B8 5125 front and 33-185569 B8 5125 rear. Slid on like they were supposed to. Zero complaints.
  2. Jawzjeep

    1990 suburban Factory roof rack location

    Back mount. Front of burb to the left. Im looking straight up, with the beginning of the tape in line with the body where the wire disappears in the pic. Looking out the back of the burb.. The distance from that rooftop body line decreases as it starts to round to the back. Its more like 1 1/4"...
  3. Jawzjeep

    1990 suburban Factory roof rack location

    Middle mount. It measures the same from that roof bodyline, 1 3/4". Again, front of burb to the left. Sorry this one got turned. Middle mount again. The measure in this pic obviously reflects the location of the mount to that body line not the bolt hole center. Front of burb would be up in this pic
  4. Jawzjeep

    1990 suburban Factory roof rack location

    This is the front mount on the outside. Here you can see the bodyline I was referencing on the inside, but on the outside. The long pine needle is set right along it just in case it didn't come out well in the picture.
  5. Jawzjeep

    1990 suburban Factory roof rack location

    I'll see if I can help. I didn't mount mine and don't know if it's in the correct location or not. It works but there's some things I would change. If it was me I would just put it all together lay it down on the roof make sure it's close to square and drill some holes. More on that after some...
  6. Jawzjeep

    Axle swap help

    I think you can drill out the 7/16 banjo
  7. Jawzjeep

    What have you done to your square lately??

    Decided to start messing with the rear heater in the burb. All the parts were in a box in the back with a destroyed housing. Looks like I'll be making my own box or surround for it. Hopefully something that's strong enough to not be broken again next time Filled the core and it leaked.. bummer...
  8. Jawzjeep

    Axle swap help

    They should just fine. 74 should have a 44 not a 10 bolt but doesn't really matter. Are you doing it for the gear change? 4.10- 4.11 comes in a lot of 3/4 ton running gear. Though it means a wheel swap though too of you were to go that route. I get it though if you got a deal for the axles
  9. Jawzjeep

    New race car.

    Gambler 500?
  10. Jawzjeep

    NP203 Transfer case backyard install

    I use mine for dropping gas tanks too. Sooo many uses.
  11. Jawzjeep

    Let's see those 4x4 Squares On Dirt!

    Lucky! Its beginning to look a lot like drift-mas
  12. Jawzjeep

    Rear leaf spring suburban?

    Don't know if its normal for your 87 but I've had many trucks with spring ends like that. Some in my driveway..
  13. Jawzjeep

    What are some options for mud flaps?

    I've always used welcome mats for mudflaps with the welcome side to the tire. I get them 'free' from my neighbors.
  14. Jawzjeep

    Let’s see your memorabilia?!

  15. Jawzjeep

    What have you done to your square lately??

    I appreciate you posting this. I'm considering doing the same thing with Noico. Did you put anything over top of that? My focus is a little more about keeping heat in than sound out though.
  16. Jawzjeep

    What have you done to your square lately??

  17. Jawzjeep

    What have you done to your square lately??

  18. Jawzjeep

    Let’s see your memorabilia?!

    Not sure that the four wheeler magazine plate counts. Extra points for anybody who knows where the 'this machine bites' plate came from. Gotta love the jeepster tonka truck.
  19. Jawzjeep

    Intermediate shaft help

    Speedway also has all of the U-joints and shafts in any style you need to build your own. I built mine for around $60. They have joints with 'D' on one side and any spline count on the other, bolt on or weld on. I know its a thing people do but I like chevy parts on my jeep, not jeep parts on my...
  20. Jawzjeep

    Which steering bracket from hogback or steering bracket from ORD?

    I have the ORD brace so I can't comment on the Hogback one. Definitely made the steering feel more solid.
  21. Jawzjeep

    Bought a 73 F100 4x4

    I love dentsides, sweet truck! I have a 76 F250 in my driveway that my grandfather bought new. Im a very proud 3rd generation to drive it, and one of my boys will be the 4th. Had Cope Bros build the 360 into a 390 with a nice cam back in the 80's. (Man, that makes me feel old) I rebuilt the...
  22. Jawzjeep

    Manual spring starter

    Found this one too and its sized for a cummins. This is brand called cqstart. $1150!
  23. Jawzjeep

    Manual spring starter

    I sent an email to one called the ipu group. They're out of UK.
  24. Jawzjeep

    Manual spring starter

    I get your point. Not looking at air starters. Finding the spring starter isnt too hard. There's a few makers I've seen already. I was asking if anybody has adapted one to a square. I know its a long shot but it could save me some of the legwork is all. Even considered adapting a Coffman...
  25. Jawzjeep

    Manual spring starter

Latest posts

Forum statistics

Threads
44,163
Posts
950,686
Members
36,276
Latest member
2manysquares2care
Top