Search results

  1. iamtherealJayy

    Goodwrench crate engine smoking from passenger side exhaust

    So I just picked up this Frankenstein truck that’s got a goodwrench 350 with “<30k” on it. It’s been sitting some odd years due to previous gent said it was flooding out and running rich. I put a battery on it gave it a shot of brake clean and it fired right up and idled, but it’s most...
  2. iamtherealJayy

    TBI idle issue

    What do you suppose is causing the fuel to puddle everywhere? Last time I worked on this issue I replaced the base gasket under the throttle body (lowered idle some fixed vacuum leak) and I cleaned it while it was off.
  3. iamtherealJayy

    K10 suspension upgrades?

    Pics of what I remembered I need to show
  4. iamtherealJayy

    TBI idle issue

    Here’s a video of the throttle body with the air cleaner off. I notice fuel pooling around the rear of the throttle body. Throttle cable removed doesn’t make a difference on return to idle speed, I can close the throttle manually and it will lower the idle but fuel puddles on top of the throttle...
  5. iamtherealJayy

    K10 suspension upgrades?

    Sorry for no responses for a little bit worked late yesterday, I’ll get some more pics today around lunch. Also hopefully going to get some 2000’s aluminum Chevy wheels today to put on the truck for time being. I’ll get pics of stuff with wheels off too. This front bumper has a 45° piece coming...
  6. iamtherealJayy

    K10 suspension upgrades?

    That’s very close to what the front hub on my other trucks looks like only difference being the locking part being different amongst them. This 81 has a totally different looking one Edit: I have no idea what it originally had, rearend was replaced because the truck pulled a boat and stayed...
  7. iamtherealJayy

    K10 suspension upgrades?

    The ony thing different on this front axle compared to my others is the locking hub, I meant to get a photo but it’s way different looking, it bolts to the hub then the locking part bolts to that spacer looking piece. I believe 6 bolts around it? My 87 has the rpo code for 3.42’s which made no...
  8. iamtherealJayy

    K10 suspension upgrades?

    I’ve read a lot on a few online forum sites and got this 1/2 ton is 6” tall, 3/4ton is 6” tall but a 1 ton is 8” tall under the cab, I’ll measure. I read that d44 front axle was only optioned until 80 in the 3/4 tons. 10b after 81. 81+ 14b could be semi or full float. I’ve read a whole lot of...
  9. iamtherealJayy

    K10 suspension upgrades?

    I sent a photo of the rear of the tcase with the joint to the rear driveshaft, yes my bad
  10. iamtherealJayy

    K10 suspension upgrades?

    Can we agree on the front axle being a d44? Are they harder to work on than my other front axles? I was hoping for a d60 but apparently dude didn’t chunk out that change lol I just need to verify the ratios being the same. I’m not concerned about the axles if they work. I’m more trying to figure...
  11. iamtherealJayy

    K10 suspension upgrades?

    That was rear of the case what you sent look my my 208 in my 87 especially with that little red tag. I agree with the sm465 since it’s got the pto plate on the side and the shifter looks like mine and the far reverse.
  12. iamtherealJayy

    K10 suspension upgrades?

    Previous owner stated the truck was built to be used. I’m just trying to figure out what I need to use for what to make my trucks how I want lol. My 87 needs a frame and my half ton needs to be better than a half ton.
  13. iamtherealJayy

    K10 suspension upgrades?

    Last one This one was man only trying to see frame thickness at the front spring
  14. iamtherealJayy

    K10 suspension upgrades?

    And more
  15. iamtherealJayy

    K10 suspension upgrades?

    The np205 I got that idea from the shift pattern in the cab and the look of the shifter. It’s 4L N 2H 4H similar to my 78. The front has 5 leafs in the springs and the rear is 8 plus two overload? Here’s some pics
  16. iamtherealJayy

    K10 suspension upgrades?

    The shifter does have the reverse car right and so far down the shifter almost touches the seat like my sm465’s but I didn’t want to assume just off that since I haven’t had a different one to know the difference. It does have a zbar with so much slop I can make the clutch pedal almost kiss the...
  17. iamtherealJayy

    K10 suspension upgrades?

    I did not see any cat shields, my 87 does have it however under the cab. This truck has dual exhaust no cats with some thrush mufflers or something similar. The exhaust manifolds also don’t match one being a ram horn style and one being where it exits at the rear. I’m assuming the brackets off...
  18. iamtherealJayy

    K10 suspension upgrades?

    I get it I get it, I just need to know what to look for since I did measurements from all thre trucks and nothing appeared obviously different with the frame.
  19. iamtherealJayy

    K10 suspension upgrades?

    No idea on shift pattern has a custom knob, doesn’t grind going into what I’m used to being “Low” I can get pics of trans soon I just finished dinner. I ran outside to take those pics lol. I can get a measurement of thickness if you tell me where to get the measurement. I’ve got a true 3/4 ton I...
  20. iamtherealJayy

    K10 suspension upgrades?

    You just tell me what to look for, I couldn’t look at the frame real hard I haven’t washed and degreased it yet and the fuel tank is in the way, which is missing the switch so I need to get that sorted out to see which tank is selected.
  21. iamtherealJayy

    K10 suspension upgrades?

    It’s got an 81 bumper with the turn signals in the bumper if that helps, but it’s also got the grille with the turn signals. The bumper had them removed
  22. iamtherealJayy

    K10 suspension upgrades?

    I assume the picture you sent is what I’m needing a photo of? I’ll go take one
  23. iamtherealJayy

    K10 suspension upgrades?

    Alright words from previous owner. 81 c10 cab and misc body parts, some year 3/4 ton frame and flat bed, some year one ton rear end. Brand new goodwrench crate engine with <30k with a manual trans(I haven’t identified yet) and a np205 tcase. Is there anything in specific I can do to verify any...
  24. iamtherealJayy

    K10 suspension upgrades?

    It’s a Frankenstein for sure it was owned by a farmer type guy. I’m hoping the new info this afternoon is beneficial. Is there a vin on the frame anywhere I can find?
  25. iamtherealJayy

    K10 suspension upgrades?

    I’m gonna assume it’s a Frankenstein like my other 3/4 ton. But look like you got the same info I did from the vin. 81 c10. It’s got one ton axles but what’s something I can do to verify what the frame is. The frame was all I really bought the truck for lol. The goodwrench 350, manual trans...

Latest posts

Forum statistics

Threads
44,164
Posts
950,702
Members
36,277
Latest member
chevyBlu
Top