Search results

  1. highdesertrange

    Radiator Brackets

    the lower radiator brackets are part of the core support. the upper brackets change according to the radiator size. highdesertranger
  2. highdesertrange

    1989 R/v 3500 2WD to 4WD engine crossmember

    I am assuming the body on the 76 is junk? wait a second there are not any 76 CUCV's. what exactly are you trying to do? highdesertranger
  3. highdesertrange

    Help with steering on mod

    order yourself some ARP studs. you will have to contact them I don't see them listed but I know the make them. here's the web site http://www.arp-bolts.com/ . here's the stud kit from OffRoad Design these don't say they are ARP but their kit for the Dana 60 says they are ARP. hope this...
  4. highdesertrange

    Dies on speed bumps/sudden spots

    from your description it sounds like it's flooding. I am 99% sure of this. Sea Foam and fuel filters are not going to help. if you described it to the shop the way you did here it should have been obvious to them and they should have been able to replicate it. highdesertranger
  5. highdesertrange

    Help with steering on mod

    so you are saying the studs are made in Costa Rica, and not imported? are you using the cones? the way I am seeing it those studs are not grade eight. highdesertranger
  6. highdesertrange

    clutch issue

    well is it adjusted properly? highdesertranger
  7. highdesertrange

    Help with steering on mod

    are these #8 studs from China? highdesertranger
  8. highdesertrange

    Help with steering on mod

    what kind of studs are you using? get some ARP studs. highdesertranger
  9. highdesertrange

    Stuck Block (SBC 350 '83)

    drum roll please. highdesertranger
  10. highdesertrange

    Dies on speed bumps/sudden spots

    what kind of carb? highdesertranger
  11. highdesertrange

    how much piston damage is ok

    if it didn't crack it clean up any burrs and run it. highdesertranger
  12. highdesertrange

    clutch issue

    has it always been lie that? what clutch do you have? do you have the proper adjustment/freeplay? highdesertranger
  13. highdesertrange

    Fuel pump placement.

    I sure hope you are not trying to run those high pressure pumps directly into a carburetor. highdesertranger
  14. highdesertrange

    Help with steering on mod

    yes it would but you still need to straighten out that shaft. highdesertranger
  15. highdesertrange

    Help with steering on mod

    slow down fix one thing at a time before you start new stuff. does it have a body lift? I said that before because of the angle of the shaft. I forgot you have a newer body and a K frame. regardless the angle of the shaft is way off. looks like your rag joint and slip joint are both in need...
  16. highdesertrange

    Help with steering on mod

    here's what I think I see. it appears to have a big body lift and the angle of the shaft is too great on the input to the steering box. it appears that the steering column angle was not modified with the body lift. also it appears those are stock springs with leafs added. get a set of real...
  17. highdesertrange

    Stuck Block (SBC 350 '83)

    if it's pot metal you can't weld it. you could make one, and yes using a socket would be stronger. just take the broken one trace it over to a piece of at least 1/4" and weld a big ole nut to it. highdesertranger
  18. highdesertrange

    Stuck Block (SBC 350 '83)

    you might be able to get one on loan from the parts store. they give you a fair amount of torque because you are so far from the center line of the crank. to reverse direction you must relax the bite of the tool and reposition it by flipping it around. if it ran before you stored it you...
  19. highdesertrange

    Stuck Block (SBC 350 '83)

    like this, https://www.amazon.com/GearWrench-2270-Flywheel-Turner/dp/B000CO9NU2 . if you can't budge it at all either way I am thinking it might be beyond saving. could have something broken jamming it up. highdesertranger
  20. highdesertrange

    Stuck Block (SBC 350 '83)

    get a flywheel turner. or make that piece that broke out of real metal. you have a pattern. did the engine move at all? highdesertranger
  21. highdesertrange

    Stuck Block (SBC 350 '83)

    looks like pot metal. highdesertranger
  22. highdesertrange

    Rear diff making a popping noise

    if you are running a limited slip with clutches you need the additive some of the synthetics will work without the additive. read the label. highdesertranger
  23. highdesertrange

    Help with steering on mod

    they make shims to correct the caster. you got a pic it might help? how much of a lift? did you put a steering arm on it. highdesertranger
  24. highdesertrange

    Firewall Insulation

    I replace the jute ones with closed cell foam. highdesertranger
  25. highdesertrange

    1976-87 dual tank harness available!

    do you have a web site? I enter harnessworx and get mostly wireworx and a bunch of crap. please don't tell me it's on the facey thing. highdesertranger

Latest posts

Forum statistics

Threads
44,163
Posts
950,648
Members
36,276
Latest member
2manysquares2care
Top