Search results

  1. 78k10bro

    1986 k5 blazer front axle inner axles

    I picked up a 1986 k5 blazer and I’m wanting to build the front axle cause not all of us have the d60 money. I am wondering if there’s anyway to tell if I have 28 or 30 spline axles without tearing it apart. Been searching and I’ve found mixed results of the later axles being 30 spline but...
  2. 78k10bro

    1978 k10 rear u joint movement

    Yes sliding side to in the straps
  3. 78k10bro

    1978 k10 rear u joint movement

    Hey all! So I’ve been driving my truck for a while now and I’ve already lost a u joint from a loose strap and now I’m very cautious about them. I just checked my u joints and the rear has a slight bit of movement side to side, my straps are as tight as I can get them (without rounding them off)...
  4. 78k10bro

    Steering shaft binding

    I just bolted the pieces that connect the shaft and the box together
  5. 78k10bro

    Steering shaft binding

    I cut off the rag joint on my k10 to help with the slop in the steering, now the steering is a lot tighter but harder to turn. Could it be binding? It also has cross over steering that’s brand new.
  6. 78k10bro

    Traction bars for 9 inch lift?

    Putting an 8 inch suspension lift and a 1 inch body lift on my k10, going to have 39.5 super swampers. Would I need to run traction bars or should I be safe without em?
  7. 78k10bro

    Small block 350 lifter tick?

    I got it fixed today 2 of the valves needed to be adjusted about a 3/4 turn and that quieted them down
  8. 78k10bro

    Small block 350 lifter tick?

    I just put together a small block 350, bought the block bored .60 over it has flattop pistons, stock crank. I got a cam i think it’s a 283 out of a different 350 and same with the lifters, they have about 1000 miles on them, also running aluminum darts heads. I started it up with a gear drive...
  9. 78k10bro

    What size lift to clear 40s?

    @Frankenchevy cuz square bodies are meant meant to have big tires and big lifts. But in all seriousness im building it to be my dream truck and I think the big squares look the best.
  10. 78k10bro

    What size lift to clear 40s?

    I’m about to get a bds 8 inch lift but it comes with 56 inch springs. The Dana 44 I’m getting comes with a b-52 hanger set so I can run them on the front but what do I need to run them in the back?
  11. 78k10bro

    What size lift to clear 40s?

    @Rumbledawg those fender flares don’t sound like a bad idea.. do you have any pics of your truck with them on? I’d love to see it
  12. 78k10bro

    What size lift to clear 40s?

    Don’t plan on doing any hard core wheeling, she’s gonna be my daily when I start driving and mostly just logging roads and light trails. If i go with the body lift should I just change to a jeep Cherokee steering shaft and make that fit? I’ve heard it’s better than the stock ones. I’m also...
  13. 78k10bro

    What size lift to clear 40s?

    I have a 78 chevy k10, I’m about to swap a 14 bolt rear and Dana 44 front. I have some 39.5 super swampers that I’m going to put in it but I’m wonder if an 8inch lift will clear them? I’m willing to cut my fender a little but no body lifts. Thanks
  14. 78k10bro

    Best gear ratio for 8 inch lift and 40s?

    What yoke would you recommend getting? Also the cvs?
  15. 78k10bro

    Best gear ratio for 8 inch lift and 40s?

    I found a 14 bolt rear and Dana 44 both with 4.56s and it comes with cross over steering. I will look into that steering box and also the drive shaft stuff, thankyou.
  16. 78k10bro

    Best gear ratio for 8 inch lift and 40s?

    Also wondering what steering box to use for cross over steering if anyone has some recommendations? Not going to go with hydro assist.
  17. 78k10bro

    Best gear ratio for 8 inch lift and 40s?

    I’ve already fixed the crack and reinforced at the steering box so that won’t be an issue. I’m going to go with cross over steering and I have dual stabilizers on it already. I’ll look into spicer but I’m pretty sure I’m going to go with 4.56s, also what would be the best way to stop driveshaft...
  18. 78k10bro

    Best gear ratio for 8 inch lift and 40s?

    Yea i have a granny low first so probably not an overdrive. Thank you all for your input, what is the best place to get gears? Also if i went with 38s would that make much of a difference or would it be close to same as 40s?
  19. 78k10bro

    Best gear ratio for 8 inch lift and 40s?

    Daily driver and light off-road also I don’t know if I have an overdrive trans it’s a 4 speed manual
  20. 78k10bro

    Best gear ratio for 8 inch lift and 40s?

    I have a small block 350 and I’m about to swap a 14 bolt rear and Dana 44 front in. Im going to put an 8 inch lift and 40 in super swampers on it also but I’m wondering what the best gear ratio would be?

Latest posts

Forum statistics

Threads
44,162
Posts
950,639
Members
36,273
Latest member
dannyphx
Top