Search results

  1. S

    Speaker pods/General stereo questions

    Does anyone know off hand if these will fit in the stock dash locations? https://cerwinvega.com/3-5-hed-series-coaxial-car-speakers-h735.html Thanks again!
  2. S

    Speaker pods/General stereo questions

    Btw...your signature is classic Horsepower is how hard you hit the protesters. Torque is how far you drag the bodies. USMC. Putting Warheads on Foreheads since 1775. Semper Fi
  3. S

    Speaker pods/General stereo questions

    That was my initial thought, thanks for confirming! I have the headliner off right now and it looks like there is enough room to mount ceiling speakers? However I'm not sure I want to make that commitment...I want something that sounds good and loud enough to drown out gangster rap at a...
  4. S

    Speaker pods/General stereo questions

    I hear ya...do you think the kick panel speakers are good bang for the buck or I would be good with the 2 3.5" and the center channel in the dash? On the rear 4x10's is it that much of an upgrade to drop 6x9's in?
  5. S

    Speaker pods/General stereo questions

    Hey all! I'd like to upgrade the sound system and will probably try a 7.1 setup with (2) 3.5 and center 4x10 (or adapter to 2x3.5" + tweeter?) in the dash, (2) kick panel speakers, (2) 4x10 in stock rear location (or I think I saw some 6x9 adapters?) and a subwoofer...or should I just omit the...
  6. S

    Turn signal not working left side

    Ok...so everything worked in the driveway and took it out for a test drive and sure enough the left turn signal wouldn't flash.. I think I got all the grounds pretty well cleaned up and I tried hitting the contacts in the bulbs sockets with a small jewelers file too...I'm suspecting a loose...
  7. S

    Turn signal not working left side

    Ok...after verifying all the grounds were good and cleaning them up the duck qucked in my face. This is a bit embarrassing but it turned out to be a blown bulb on the driver side marker light! Thanks again for the direction and I still don't know what that wire under the dash is for, haha!
  8. S

    Turn signal not working left side

    Hey all, I replaced my turn signal column switch today and hoped it would solve all my problems, but hope is not a good strategy... I'm still haunted house with my left signal not blinking... However when I turn on the hazards it blinks, somewhat dimmer than the passenger side though. I've...
  9. S

    Tuff Country Lift Kit Experience

    Thanks for the help everyone! 2" kit on with 5100 Bilstein shocks...night and day difference. Probably had something to do with the truck sitting 5 years so the old springs were flllaaaattttt... I had to go out and get some bigger rims/tires to fill up the wheel wells, haha. Lucky for me it's...
  10. S

    Tuff Country Lift Kit Experience

    Haha...yeah...I thought that might be the case... Everything seemed to be going well....until I read the instructions, haha
  11. S

    Tuff Country Lift Kit Experience

    Hey All, I'm installing a 2" EZ ride on my 1981 Burb and have run up against a couple of questions...I purchased the kit almost 2 years ago and just got around to installing it...long story So the instructions do talk about brake extension lines and brackets. There were no lines included in my...
  12. S

    Horns

    Hey Turbo, THANKS! Working backwards saved the day! I found a small section of the green wire had been cut out up by the driver side horn. I'm assuming for the "oooh-gaaa" horns of the 80's that had subsequently gone away...I spliced it back, put the relay back in and everything works as it...
  13. S

    Horns

    Soooo...circling back around on this... I pulled the grill off and jumpered the + battery straight to the horns and the work. Would that lead me back to the black wire at the steering wheel being severed or it sounds like the green wire going to the horns is busted somewhere?
  14. S

    TH350c Slipping

    Ok...so here is the update.. I just picked it up and drove it home about 6 miles..all seemed to work well but I think I need to adjust the timing now that the tranny is fully engaging it seems to knock a bit when I floor it... They pulled the tranny apart and he said that indeed the valve body...
  15. S

    TH350c Slipping

    I waved the white flag and dropped it off last week. I checked in on it today and he said they pulled the trans out today and will crack it open tomorrow...I'm curious at this point as well. I did realize I never cleaned/rebuilt the valve body when I had it apart...
  16. S

    TH350c- Double-Double Feed

    Hey All, I posed the question on my other thread too but I guess I should start another as my tranny isn't slipping, it only has 3rd gear! It also has reverse. Someone said to check the governor which I will do but I was also thinking that when I rebuilt it, it did the dual feed mods (plug...
  17. S

    TH350c Slipping

    Hey All, So I'm not sure if I should post a new thread or just keep this one going but until I get it 100% solved, I guess I will keep on here! I took the truck to a transmission shop and he said jump in and let's go for a drive...while driving he asked me on my rebuild if I did this or that...
  18. S

    TH350c Slipping

    Hey All, I have finally gotten back to my project after getting pulled in 50 different directions over the last month...my wife asked me what I wanted for Father's Day and I said how about 6-8 uninterrupted hours of wrenching?! I got a tranny jack from Harbor Freight and as I got on the...
  19. S

    TH350c Slipping

    Ahhhh.....that makes a lot of sense! I should hopefully be able to switch the transmissions out after spring break and get to the bottom of it!
  20. S

    TH350c Slipping

    Hey All, So I have a used th350 that was operating before it was pulled..Once again not the most experienced guy with a wrench, but I was getting everything ready to swap it (change filter) and I tried to spin the stator shaft and it doesn't spin...I looked at a couple of other threads and it...
  21. S

    Adapt 4x4 Th350 in Place of 700r4

    I tried posting up a thread but you guys sound like you may have already worked through what I was asking.... I have a th350 with a short shaft I would like to swap into my 1981 Suburban that has a th350 in it now and an np208. I have read a few different forums that you can take of the...
  22. S

    th350 short shaft to 4x4

    So I'm having some trans trouble and I was going to try to swap it out with a "known good" unit to keep the truck operational and tear down the other... From what I can gather, in a 1981 4x4 with an np208 I can use a 2wd short shaft trans and cut 3/4" off of the output shaft? Seems to good to...
  23. S

    TH350c Slipping

    I haven't had time to troubleshoot the trans for a while but was looking at ordering a new plate/gaskets just to make sure I had the right ones. I did pull out the parts I had left over from the rebuild kit and there were 2 new gaskets for what I'm assuming is a non lockup th350 so that leads me...
  24. S

    TH350c Slipping

    I have been reading a few articles here and there and looking at the gaskets I took out, it looks like they were from a shift kit? I was also reading a few instruction books from different shift kits and it looks like for the 350c, you would use the exiting plate and drill out some holes? If so...
  25. S

    TH350c Slipping

    Very insightful Rob! I honestly didn't even think they still produced Dextron III! I met Andy Rooney (60 minutes) one time and I brought him a hat from the company I was working for. He examined it front and back, which I assumed he was looking for a snap back or something and then I said "It's...

Latest posts

Forum statistics

Threads
44,162
Posts
950,639
Members
36,273
Latest member
dannyphx
Top