Search results

  1. Y

    Intake plenum gaskets

    Okay now I just need to learn how. Hope I can see well enough to see the marks.
  2. Y

    Intake plenum gaskets

    The guy that looked at it recently checked it and was happy with it, I need to learn how to check it myself, something I have never done. I just looked at a video of it, I need to see if my timing light is a good one or a cheap one, hopefully it will work. Edit: My timing light is Innova 3551...
  3. Y

    Intake plenum gaskets

    I hauled hay this morning, started up with 3-4 pumps. It runs ok but seems rough, sometimes hesitates when taking off. I know this doesn't explain much but I think it still needs help, not sure where to go from here.
  4. Y

    Intake plenum gaskets

    How come 2 "mechanics", one in a shop, couldn't figure out it needed an accelerator pump? I know for a fact the first one used the old one because a new one didn't come with the kit. Just venting here, I have a lot more questions about the truck since I am using it quite a bit now, but will...
  5. Y

    Intake plenum gaskets

    No it used to run good enough to pull a trailer, priming has been a problem for a long time even though I had it worked on twice, then it started getting worse so I was afraid to try pulling the trailer, it was weak at low speeds and I don't know if it would have pulled a hill. I hauled 4 loads...
  6. Y

    Intake plenum gaskets

    I got the carb off the truck and apart today, got the air horn off ok. I poured the gas that was in there out. The power valve with the two needles was stuck and a little bent, and the needle valve was completely off and the wire spring that holds it on the float was off. How did that happen...
  7. Y

    Intake plenum gaskets

    Is the part indicated in the picture just for air conditioning? If so can I remove it? AC is history in this truck.
  8. Y

    Intake plenum gaskets

    Ok thank you. I have it off, it needs a new mounting gasket anyway.I think I'm just going to replace the accelerator pump and clean it up and check the float for now, Many of the other parts have been recently replaced. I know there are charts that come with rebuild kits that tell where the...
  9. Y

    Intake plenum gaskets

    Don't I have to remove the top to replace the accelerator pump?
  10. Y

    Intake plenum gaskets

    1. Ok changing the accelerator pump today. 2. Yes but I think it needs a grommet, got a new one today. 3. Pretty sure fuel filter is correctly installed but I'll check 4. Yes I think so I'll take pictures of what I think are vacuum cannisters. Can I eliminate them or do I just need to find...
  11. Y

    Intake plenum gaskets

    Does anyone have the chart for float level for the various quadrajets? Mine is 17059226.
  12. Y

    Intake plenum gaskets

    5 miles outside of Creswell
  13. Y

    Intake plenum gaskets

    I have never checked timing on my own, I do have a timing light but need specific instruction. Can't do it right now but tomorrow I will quote that post (51) and answer and ask questions. It's sounding to me from the comments on this posts and from what the guy that looked at it did spraying...
  14. Y

    Intake plenum gaskets

    Ok. pretty sure all is good there, but won't hurt to look.
  15. Y

    Intake plenum gaskets

    I can't see myself putting it in backwards, but I'll check.
  16. Y

    Intake plenum gaskets

    I've been hauling a load of hay every day in spite of the problems while waiting for parts. This morning the truck starts but dies when I try to move it. Is this probably related to the same problem or is it something new? Reminds me of how it acted a long time ago when the vacuum line on...
  17. Y

    Intake plenum gaskets

    I just want to say, many thanks for all the good advice, I think I'll be able to fix it mysef, gonna try anyway.
  18. Y

    Intake plenum gaskets

    Good sealer like Ultra black?
  19. Y

    Intake plenum gaskets

    It does smooth out at about 40mph on fairly flat ground, would this indicate probably no vacuum leaks?
  20. Y

    Intake plenum gaskets

    Will I need a new gasket between the carburetor and the intake manifold?
  21. Y

    Intake plenum gaskets

    Not using that mechanic, already tried another, think I have to fix it myself.
  22. Y

    Intake plenum gaskets

    I am a little worried about taking the top off without removing the carburetor from the engine, afraid I might drop a screw into the motor. Any suggestions? I'd rather not take it off but I will if it seems smarter to do it that way. I haven't ever done any carburetor repair, so I'm new to this.
  23. Y

    Intake plenum gaskets

    Is my math wrong? I get just a little less than 17 gal/hr., is that still enough? Seems like it to me but I'm no expert.
  24. Y

    Intake plenum gaskets

    Ok thank you, is there an instruction sheet or video that would help me with this?
  25. Y

    Intake plenum gaskets

    Is this the stuff I need? https://quadrajetpower.com/accelerator-pump-assembly-with-air-horn-gasket/ I am a little worried that not getting enough fuel might be a blockage in the lines or in the electrical part that switches the tanks. When I first started trying to figure this out, I tried to...

Latest posts

Forum statistics

Threads
44,162
Posts
950,642
Members
36,275
Latest member
2manysquares2care
Top