Search results

  1. Mango

    Rear Main Seal

    Yes replaced the gasket on the Dist twice Over tightened the first
  2. Mango

    Rear Main Seal

    Have you used Bars Rear Main Seal Product to stop rear main seal leaks I though I had a small leak that grew after replacing intake manifold gaskets! The oil leak is getting worse now blowing under the truck to the rear axel spotty and more oil on the ground I am convinced its the rear main or...
  3. Mango

    Inner fenderwell rust

    I had the same issue, Removed all the rusty metal, Used some thick sheet metal and fab to fit, Silconed the back, Installed with rivetts and self taping screws, Sprayed it with Flex Seal severial coats, SO far all good, my Burb is not pretty just a valley ride Cheap and easy. For a better...
  4. Mango

    O2 Sensor Testing

    Can you test a Single Wire O2 Sensor with Multi Meter in OHMS
  5. Mango

    Intake Manifold Install

    Well Well Still dripping Oil! Oil Pan seal? Rear Main Seal? Intake Manifold Seal on the back side ? Going to drop the Dye in and hopefully see the issues? New issues Seems to idle high in park when engine up to temp IAC gone Bad ? was fine before
  6. Mango

    Intake Manifold Install

    Looks like the Distributors was over torqued, seal was crushed on one side? Did not pull the Manifold Re torqued the bolts to 30 one was super loose ground wire attachment Now wait and see it that was it
  7. Mango

    Intake Manifold Install

    30 it will be
  8. Mango

    Intake Manifold Install

    Well doing the Intake Man Gaskets Again tomorrow using Ultra Black RTV and moving the fuel lines completely out of the way!!! What is the torque values for the Manifold Bolts? I set them at 25 ft lbs, and it leaked from the back China Wall I think? Saw a video set at 35 Ft lbs, Other at 30 ft...
  9. Mango

    New here from AZ

    Hello From Wyoming!
  10. Mango

    New here from the Wet Coast of Canada

    Nice ride Welcome from Wyoming
  11. Mango

    Intake Manifold Install

    @Rusty Nail, Double Dingo There is no place to use the Hood lined with insulation I have a solution a Gallon of Gas and a Match Walk to work its only eight miles one way
  12. Mango

    Intake Manifold Install

    @DoubleDingo I could get one out of the way but not the other I will have to unbolt the bracket a pain to get it back
  13. Mango

    Intake Manifold Install

    @DoubleDingo My Bad wrong file work related I posted the correct one this time
  14. Mango

    Intake Manifold Install

    Fuel Lines Not sure if you can pull this up
  15. Mango

    Intake Manifold Install

    @RustyNail Double Dingo How to keep the fuel lines out of the way
  16. Mango

    Intake Manifold Install

    @DoubleDingo when you repaired, replaced the RTV did you install new gaskets or use the same ones? I did not let it set long enough before torquing the bolts, let it sit for a day before running it no leaks at the time Thanks
  17. Mango

    Intake Manifold Install

    @DoubleDingo Grey FelPro RTV going to use black next time and get the fuel lines out of the way somehow
  18. Mango

    Intake Manifold Install

    @Rusty Nail Checked it seems like the RTV failed in the back Looking into it oil coming down both sides Should just pull it off and clean the RTV use black RTV and put it back using same gaskets?
  19. Mango

    Intake Manifold Install

    Not my 396, I have a 350 all stock
  20. Mango

    Intake Manifold Install

    Yes I had leaks Checked Dist base and oil pressure sender found leak with a Bora Scope Still Have Leaks Oil Pan or Rear Main
  21. Mango

    Intake Manifold Install

    Oh ****! Seems i have a oil leak in the back left side, Possibly RTV sliped off when installing Manifold? Dam fuel lines in the way will have to do it over again this time should be easer and faster! What to do with those pesky fuel lines Will check if oil is comming from someplace else
  22. Mango

    Oil Pan Gasket

    Fel-Pro Gasket Install should I also replace bolts with new ones
  23. Mango

    Burning Oil At Start Ups

    I Have been getting blue smoke at start ups and getting worse! I have been told running rich O2 sensor Valve seals Piston Rings Running great shut down let it sit for a few,start up no blue smoke 199,000 miles all original Oil Additives? Complete engine rebuild?
  24. Mango

    Intake Manifold Install

    So Far still no codes The Beast Rides Again
  25. Mango

    Has anyone bought the LMC dash?

    I installed a Skin Last Summer Fit pretty good so far no warpage, i ordered Gray and they sent light blue

Latest posts

Forum statistics

Threads
44,162
Posts
950,641
Members
36,275
Latest member
2manysquares2care
Top